Kenwood KDC-X7000DAB User manual

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
B5A-0892-00 (XW)© 2015 JVC KENWOOD Corporation
KDC-X7000DAB
CD-RECEIVER
INSTRUCTION MANUAL
JS_KWD_KDC_X7000DAB_XW_C00_1.indd 1JS_KWD_KDC_X7000DAB_XW_C00_1.indd 1 2/11/2015 9:10:33 AM2/11/2015 9:10:33 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
2
CONTENTS BEFORE USE
IMPORTANT
• To ensure proper use, please read through this manual before using this product. It is especially important
that you read and observe Warning and Caution in this manual.
• Please keep the manual in a safe and accessible place for future reference.
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the external device if it might hinder safe driving.
•
Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
• USB rating is indicated on the main unit. To view, detach the faceplate. ( 
3 )
USB rating for the USB cable from the rear of the unit is indicated on a label. ( 
32 )
• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the
antenna control wire connected ( 
32 ). Turn off the unit or change the source to STANDBY when parking at
a low ceiling area.
Remote control (RC-406):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or
equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used
batteries promptly. If swallowed, contact a physician immediately.
How to read this manual
• Operations are explained mainly using buttons on the faceplate.
• English indications are used for the purpose of explanation. You can select the display language from the
[
FUNCTION ] menu. (  5 )
• [
XX ] indicates the selected items.
• ( 
XX ) indicates references are available on the stated page.
BEFORE USE 2
BASICS 3
GETTING STARTED 4
1 Select the display language
and cancel the demonstration
2 Set the clock and date
3 Set the initial settings
DIGITAL RADIO 6
ANALOG RADIO 8
CD / USB / iPod / ANDROID 10
AUX 12
Pandora® 13
BLUETOOTH® 14
AUDIO SETTINGS 21
DISPLAY SETTINGS 23
TROUBLESHOOTING 24
REFERENCES 27
Maintenance
More information
SPECIFICATIONS 29
INSTALLATION /
CONNECTION 30
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 2JS_KWD_KDC_X7000DAB_XW_EN_1.indd 2 2/11/2015 11:17:11 AM2/11/2015 11:17:11 AM

Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
3
BASICS
To On the faceplate On the remote control
Turn on the power Press .
• Press and hold to turn off the power.
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Adjust the volume Turn the volume knob. Press or .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source Press repeatedly. Press SRC repeatedly.
Change the display information Press DISP repeatedly. ( 
28 )( Not available )
Faceplate
How to resetAttach Detach
Press the switch twice
within 5seconds after
detaching the faceplate.
Remote control (RC-406)
Pull out the insulation
sheet when using for
the first time.
How to replace the battery
Remote sensor (Do not expose to
bright sunlight.)
ENGLISH
Display windowVolume knob
Detach button USB cable from the rear of the unit
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 3JS_KWD_KDC_X7000DAB_XW_EN_1.indd 3 2/11/2015 11:17:11 AM2/11/2015 11:17:11 AM

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Set the clock and date
1 Press the volume knob to enter [
FUNCTION ].
2 Turn the volume knob to select [ CLOCK ], then press the knob.
To adjust the clock
3 Turn the volume knob to select [ CLOCK ADJUST ], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5 Turn the volume knob to select [ CLOCK FORMAT ], then press the knob.
6 Turn the volume knob to select [ 12H ] or [ 24H ], then press the knob.
To set the date
7 Turn the volume knob to select [ DATE FORMAT ], then press the knob.
8 Turn the volume knob to select [ DD/MM/YY ] or [ MM/DD/YY ], then press
the knob.
9 Turn the volume knob to select [ DATE SET ], then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press .
Set the initial settings
1 Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [ FUNCTION ].
3 Turn the volume knob to select an item (  5 ), then press the knob.
4 Repeat step 3until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press .
2
3
GETTING STARTED
Select the display language and cancel the demonstration
When you turn on the power for the first time (or [ FACTORY RESET ] is set to
[
YES ],  5 ), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME
KNOB”
1 Turn the volume knob to select [ ENG ] (English), [ RUS ] (Russian) or
[
SPA ] (Spanish), then press the knob.
[
ENG ] is selected for the initial setup.
Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME
KNOB”.
2 Press the volume knob.
[
YES ] is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
Then, the display shows the selected crossover type:
“2-WAY X ’ OVER” or “3-WAY X ’ OVER”
• To change the crossover type, see “Change the crossover type” ( 
5 ).
1
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 4JS_KWD_KDC_X7000DAB_XW_EN_1.indd 4 2/11/2015 11:17:12 AM2/11/2015 11:17:12 AM

ENGLISH 5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Default: XX
DISPLAY
EASY MENU
When entering [ FUNCTION ]...
ON :ZONE1 and ZONE2 illuminations change to white color.;
OFF :ZONE1 and ZONE2 illuminations remain as [ COLOR  SELECT ]
colors. ( 
24 )
(Refer to the illustration on page 23 for zone identification.)
TUNER SETTING
DAB L-BAND ON
: Receives L-BAND ensemble during digital audio reception. ;
OFF : Cancels
DAB ANT POWER ON : Supplies power to the DAB antenna. Selects when using the
supplied antenna.
; OFF : Does not supply power. Selects when
using passive antenna without booster. ( 
33 )
PRESET TYPE NORMAL :Memorizes one station for each preset button in
each band (FM1/ FM2/ FM3/ AM/ SW1/ SW2/ DB1/ DB2/ DB3).;
MIX :Memorizes one station (digital radio or analog radio) for each
preset button, regardless of the selected band.
SYSTEM
KEY BEEP* ON
:Activates the keypress tone.; OFF :Deactivates.
TDF ALARM* ON : Activates the alarm if you forget to detach the faceplate when
ACC is set to OFF.;
OFF : Deactivates.
SOURCE SELECT
PANDORA SRC ON
:Enables PANDORA in source selection.; OFF :Disables. (  13 )
BUILT-IN AUX ON :Enables AUX in source selection.; OFF :Disables. (  12 )
CD READ 1 :Automatically distinguishes between audio file disc and music
CD.;
2 :Forces to play as a music CD. No sound can be heard if an
audio file disc is played.
*
Not applicable if 3-way crossover is selected.
GETTING STARTED
F/W UPDATE
UPDATE SYSTEM/ UPDATE DAB1/ UPDATE DAB2
F/W UP xx.xx/
F/W UP xxxxx/
F/W UP Vxxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
FACTORY RESET YES :Resets the settings to default (except the stored station).; NO :Cancels.
CLOCK
CLOCK DISPLAY ON
:The clock time is shown on the display even when the unit is turned
off.;
OFF :Cancels.
ENGLISH
Select the display language for [ FUNCTION ] menu and music information
if applicable.
By default, [
ENGLISH ] is selected.
РУССКИЙ
ESPANOL
Change the crossover type
1 Press repeatedly to enter STANDBY.
2 Press and hold number buttons 4and 5to enter crossover select.
The current crossover type appears.
3 Turn the volume knob to select “2WAY” or “3WAY”, then press the
knob.
4 Turn the volume knob to select “YES” or “NO”, then press the knob.
The selected crossover type appears.
• To cancel, press and hold .
• To adjust the selected crossover settings, ( 
22 ).
Caution
Select a crossover type according to how the speakers are connected. (  32 )
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 5JS_KWD_KDC_X7000DAB_XW_EN_1.indd 5 2/11/2015 11:17:13 AM2/11/2015 11:17:13 AM

6
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DIGITAL RADIO
About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems
available today. It can deliver digital quality sound
without any annoying interference or signal distortion.
Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is
transmitted on its own frequency, DAB combines several
programs (called “services”) to form one “ensemble.”
The “primary component” (main radio station) is
sometimes accompanied by a “secondary component”
which can contain extra programs or other information.
Preparation:
1 Connect the supplied DAB antenna to the DAB
antenna jack.
(  32 )
2 Press repeatedly to select DIGITAL AUDIO.
3 Press and hold (LIST UPDATE) to start the
Service List update.
“LIST UPDATE” appears and update starts. “UPDATED”
appears when update completes.
Updates take up to3 minutes. No interruption (such as
traffic information) is possible during updates.
• To cancel the Service List update:
Press and hold (LIST UPDATE) again.
Search for an ensemble
1 Press repeatedly to select DIGITAL AUDIO.
2 Press repeatedly (or press on RC-406) to select DB1/ DB2/ DB3.
3 Press and hold S/T(or press and hold S/ on RC-406) to search for
an ensemble.
4 Press S/T(or press S/ on RC-406) to select an ensemble, service
or component to listen.
• To change the searching method for S/T: Press repeatedly.
AUTO1 : Press S/T: Select an ensemble, service or component.
Press and hold S/T: Automatically search for an ensemble.
AUTO2 : Press S/T: Search for a preset station.
MANUAL : Press S/T: Select an ensemble, service or component.
Press and hold S/T: Manually search for an ensemble.
• To store a service: Press and hold one of the number buttons (1to6).
• To select a stored service: Press one of the number buttons (1to6) (or press one of
the number buttons (1to6) on RC-406).
Select a service
1 Press (LIST UPDATE) to enter Service Search mode.
2 Turn the volume knob or press J/Kto select a service, then press the knob.
(or using RC-406)
Press J/ Kto search for a service, then press .
To cancel the Service Search mode, press (LIST UPDATE).
JS_KWD_KDC_X7000DAB_XW_EN_4.indd 6JS_KWD_KDC_X7000DAB_XW_EN_4.indd 6 19/11/2015 2:09:03 PM19/11/2015 2:09:03 PM

ENGLISH 7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select a service by name
1 Press (LIST UPDATE) to enter Service Search mode.
2 Turn the volume knob quickly to enter Alphabet Search mode.
3 Turn the volume knob or press S/Tto select the character
to be searched for.
Press J/Kto go to the previous/next page.
4 Press the volume knob to start searching.
5 Turn the volume knob to select a service, then press the knob.
To cancel the Alphabet Search mode, press (LIST UPDATE).
Other settings
1 Press the volume knob to enter [
FUNCTION ].
2 Turn the volume knob to make a selection (see the following
table), then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
TUNER SETTING
AF SET ON
:
While listening to DAB: Automatically switch to FM broadcasting the
same program if the DAB signal becomes weak. It will switch back to DAB
sound when the signal becomes strong again.
While listening to FM: Automatically switch to DIGITAL AUDIO source
broadcasting the same program (if available).;
OFF :Cancels.
TI ON :Allows the unit to temporarily switch to Traffic Information if
available (“TI” lights up).;
OFF :Cancels.
DIGITAL RADIO
PTY SEARCH 1 Press the volume knob to enter PTY language selection.
2 Turn the volume knob to select the PTY language ( ENGLISH / FRENCH /
GERMAN ), then press the knob.
3 Turn the volume knob to select the available Program Type (  8 ).
4 Press S/ T to start searching.
ASW SELECT TRAVEL , WARNINGS , NEWS , WEATHER , EVENT , SPECIAL , RAD INFO ,
SPORTS , FINANCE : Turn the volume knob to make a selection, then press
the knob.
“
*
” appears in front of the activated announcement type.
Automatically switch from any source to Digital radio ensembles
broadcasting an activated announcement type.
•
Multiple announcement can be activated simultaneously.
•
To deactivate, press the volume knob again (“
*
” goes off).
LIST UPDATE AUTO :Automatically update the DAB Service List when the power is turned
on.;
MANUAL :Updates the DAB Service List by pressing and holding
(LIST UPDATE) .
PTY WATCH 1 Turn the volume knob to select the available Program Type, then press
.
The unit automatically switch from any source to Digital Radio
ensembles broadcasting the selected type of program.
Program Type: NEWS , AFFAIRS , INFO , SPORT , EDUCATE , DRAMA ,
CULTURE , SCIENCE , VARIED , POP  M (music), ROCK  M (music),
EASY  M (music), LIGHT  M (music), CLASSICS , OTHER  M (music),
WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION , PHONE IN ,
TRAVEL , LEISURE , JAZZ , COUNTRY , NATION  M (music), OLDIES ,
FOLK  M (music), DOCUMENT
OFF :Cancels.
2 Press the volume knob to enter PTY language selection.
3 Turn the volume knob to select the PTY language ( ENGLISH / FRENCH /
GERMAN ), then press the knob.
RELATED SERV ON :Enable Soft-Link function to switch to an alternative service which is
different audio program from the current audio program.;
OFF :Disable.
JS_KWD_KDC_X7000DAB_XW_EN_3.indd 7JS_KWD_KDC_X7000DAB_XW_EN_3.indd 7 13/11/2015 11:35:11 AM13/11/2015 11:35:11 AM

8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DIGITAL RADIO ANALOG RADIO
Search for a station
1 Press repeatedly to select TUNER.
2 Press repeatedly (or press on RC-406) to
select FM1/ FM2/ FM3/ AM/ SW1/ SW2.
3 Press S/T(or press on RC-406) to search for a
station.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6) or
press one of the number buttons (1to6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10seconds after step2, Direct Access Tuning
is automatically canceled.
CLOCK
TIME SYNC ON
:Synchronizes the unit’s time to the Digital Radio signal station
time.;
OFF :Cancels.
Available Program Type for PTY SEARCH
SPEECH
: NEWS , AFFAIRS , INFO (information), SPORT , EDUCATE , DRAMA , CULTURE ,
SCIENCE , VARIED , WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION ,
PHONE IN , TRAVEL , LEISURE , DOCUMENT
MUSIC
: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS ,
OTHER M (music), JAZZ , COUNTRY , NATION M (music), OLDIES , FOLK M
(music)
The unit will search for the Program Type categorized under [
SPEECH ] or [ MUSIC ] if
selected.
•
If the volume is adjusted during reception of traffic information, announcement, alarm or
news bulletin, the adjusted volume is memorized automatically. It will be applied the next
time traffic information, announcement, alarm or news bulletin is turned on.
JS_KWD_KDC_X7000DAB_XW_EN_2.indd 8JS_KWD_KDC_X7000DAB_XW_EN_2.indd 8 12/11/2015 11:27:36 AM12/11/2015 11:27:36 AM

ENGLISH 9
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
ANALOG RADIO
Other settings
1 Press the volume knob to enter [
FUNCTION ].
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
TUNER SETTING
LOCAL SEEK ON
: Searches only AM/ SW1/ SW2 stations with good reception. ; OFF : Cancels.
•
Settings made are applicable only to the selected source/station. Once you change
the source/station, you need to make the settings again.
AUTO MEMORY YES :Automatically starts memorizing 6 stations with good reception.; NO :Cancels.
•
Selectable only if [ NORMAL ] is selected for [ PRESET TYPE ]. (  5 )
MONO SET ON :Improves the FM reception, but the stereo effect may be lost.; OFF :Cancels.
NEWS SET ON : The unit will temporarily switch to News Programme if available. ; OFF : Cancels.
REGIONAL ON : Switches to another station only in the specific region using the “AF” control.;
OFF :Cancels.
AF SET ON : Automatically searches for another station broadcasting the same program in the
same Radio Data System network with better reception when the current reception is
poor.;
OFF :Cancels.
TI* ON :Allows the unit to temporarily switch to Traffic Information if available (“TI” lights
up).;
OFF :Cancels.
*
[TI] in AM/ SW1/ SW2 band is for enabling traffic interruption to DIGITAL AUDIO
source only.
PTY SEARCH 1 Press the volume knob to enter PTY language selection.
2 Turn the volume knob to select the PTY language ( ENGLISH / FRENCH / GERMAN ),
then press the knob.
3 Turn the volume knob to select the available Program Type (see the following).
4 Press S/ T to start searching.
Available Program Type for PTY SEARCH
SPEECH
: NEWS , AFFAIRS , INFO (information), SPORT , EDUCATE ,
DRAMA , CULTURE , SCIENCE , VARIED , WEATHER , FINANCE ,
CHILDREN , SOCIAL , RELIGION , PHONE IN , TRAVEL , LEISURE ,
DOCUMENT
MUSIC
: POP M (music), ROCK M (music), EASY M (music), LIGHT M
(music),
CLASSICS , OTHER M (music), JAZZ , COUNTRY ,
NATION M (music), OLDIES , FOLK M (music)
The unit will search for the Program Type categorized under [ SPEECH ] or
[
MUSIC ] if selected.
•
[ MONO SET ]/ [ NEWS SET ]/ [ REGIONAL ]/ [ AF SET ]/ [ PTY SEARCH ] is
selectable only when the band is FM1/ FM2/ FM3.
•
If the volume is adjusted during reception of traffic information, alarm or news
bulletin, the adjusted volume is memorized automatically. It will be applied
the next time traffic information, alarm or news bulletin is turned on.
JS_KWD_KDC_X7000DAB_XW_EN_4.indd 9JS_KWD_KDC_X7000DAB_XW_EN_4.indd 9 19/11/2015 2:09:30 PM19/11/2015 2:09:30 PM

10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CD / USB / iPod / ANDROID
Start playback
The source changes automatically and playback starts.
*1
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*2
Do not leave the cable inside the car when not using.
To On the faceplate On the remote control
Playback / pause Press . Press .
Reverse / Fast-forward*4Press and hold S/T.Press and hold .
Select a track/file Press S/T.Press .
Select a folder*5Press J/K.Press .
Repeat play*6Press repeatedly.
TRACK REPEAT / ALL REPEAT : Audio CD
FILE REPEAT / FOLDER REPEAT / ALL REPEAT : MP3/WMA/AAC/
WAV/FLAC file
FILE REPEAT / FOLDER REPEAT / REPEAT OFF : iPod or ANDROID
Random play*6Press repeatedly.
DISC RANDOM / RANDOM OFF : Audio CD
FOLDER RANDOM / RANDOM OFF : MP3/WMA/AAC/WAV/FLAC
file, iPod or ANDROID
Press and hold to select
ALL RANDOM .*7
*3
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the
instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application
on your Android device before connecting. ( 
27 )
*4
For ANDROID: Applicable only when [ BROWSE MODE ] is selected. (  11 )
*5
For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ ANDROID.
*6
For iPod/ ANDROID: Applicable only when [ MODE OFF ]/ [ BROWSE MODE ] is selected. (  11 )
*7
For CD: Only for MP3/WMA/AAC files.
Label side M Eject disc
USB input terminal
CA-U1EX (max.: 500mA)
(optional accessory)
Micro USB 2.0 cable
*2
(commercially available)
KCA-iP102 / KCA-iP103 (optional
accessory)
*1
or accessory cable
of the iPod/iPhone
*2
USB
iPod/iPhone
ANDROID*3
You can also connect to
the USB cable from the
rear of the unit.
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 10JS_KWD_KDC_X7000DAB_XW_EN_1.indd 10 2/11/2015 11:17:14 AM2/11/2015 11:17:14 AM

ENGLISH 11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
CD / USB / iPod / ANDROID
Select control mode
While in IPOD FRONT/ IPOD REAR source, press 5repeatedly.
MODE ON : Control iPod using the iPod itself. However, you can still play/
pause, file skip, fast-forward or reverse from this unit.
MODE OFF : Control iPod from this unit.
While in ANDROID FRONT/ ANDROID REAR source, press 5 repeatedly.
BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC
PLAY application installed in the Android device.
HAND MODE : Control Android device using the Android device itself via
other media player applications installed in the Android
device. However, you can still play/pause and file skip from
this unit.
Select music drive
Press 5 repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage Class).
• Selected drive of a multiple drives device.
Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo
While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the
iPod/iPhone to the USB input terminal of the unit.
• The unit will output the sound from these applications.
Direct Music Search (using RC-406)
1 Press DIRECT.
2 Press the number buttons to enter a track/file number.
3 Press to search for music.
• To cancel, press or DIRECT.
• Not available if Random Play is selected.
• Not applicable for iPod and ANDROID.
Select a file from a folder/list
1 Press .
2 Turn the volume knob to select a folder/list, then press the
knob.
3 Turn the volume knob to select a file, then press the knob.
Quick Search
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list
quickly.
–
Not applicable for iPod.
(or)
Press S/Tto search at a preset skip search ratio.
(
12, [ SKIP SEARCH ])
• Pressing and holding S/Tsearches at a 10
% ratio.
– Not applicable for audio CD and MP3/ WMA/ AAC/ WAV/ FLAC files.
(or)
Alphabet search (applicable only for iPod)
If you have many files in the iPod, you can search through them
quickly according to the first character of the file name.
Turn the volume knob quickly to enter character search.
Turn the volume knob to select the character.
To search for a character other than A to Z and 0to9, enter
only “
*”.
Press S/Tto move to the entry position.
• You can enter up to 3characters.
Press the volume knob to start searching.
• To return to the root folder/ first file/ top menu, press 5. (
Not
applicable for BT AUDIO source.
)
• To return to the previous setting item, press .
• To cancel, press and hold .
• For iPod, applicable only when [
MODE OFF ] is selected.
• For ANDROID, applicable only when [
BROWSE MODE ] is selected.
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 11JS_KWD_KDC_X7000DAB_XW_EN_1.indd 11 2/11/2015 11:17:14 AM2/11/2015 11:17:14 AM

12
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Other settings
1 Press the volume knob to enter [
FUNCTION ].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
USB
MUSIC DRIVE DRIVE CHANGE
:The next drive ([ DRIVE 1 ] to [ DRIVE 4 ]) is selected
automatically and playback starts. Repeat steps
1 to 3 to select the
following drives.
SKIP SEARCH 0.5% / 1% / 5% / 10% : While listening to iPod or ANDROID, selects the skip
search ratio over the total files.
CD / USB / iPod / ANDROID AUX
Preparation:
Select [
ON ] for [ BUILT-IN AUX ]. (  5 )
Start listening
1 Connect a portable audio player (commercially available).
2 Press repeatedly to select AUX.
3 Turn on the portable audio player and start playback.
Set the AUX name
While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select [ SYSTEM ], then press the knob.
3 Turn the volume knob to select [ AUX NAME SET ], then press the knob.
4 Turn the volume knob to select an item, then press the knob.
AUX (default)/ DVD / PORTABLE / GAME / VIDEO / TV
5 Press and hold to exit.
To return to the previous setting item, press .
Auxiliary input jack
Portable audio player
3.5mm stereo mini plug with “L” shaped
connector (commercially available)
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 12JS_KWD_KDC_X7000DAB_XW_EN_1.indd 12 2/11/2015 11:17:14 AM2/11/2015 11:17:14 AM

ENGLISH 13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Create and save a new station
1 Press .
2 Turn the volume knob to select [ NEW STATION ], then press the knob.
3 Turn the volume knob to select [ FROM TRACK ] or [ FROM ARTIST ], then
press the knob.
A new station is created based on the current song or artist.
4 Press and hold one of the number buttons (1to5) to store.
To select a stored station, press one of the number buttons (1to5).
Search for a registered station
1 Press .
2 Turn the volume knob to select an item, then press the knob.
[
SORT BY DATE ]:According to the registered date
[
SORT BY A-Z ]:Alphabetical order
3 Turn the volume knob to select the desired station, then press the
knob.
To cancel, press and hold .
(or using RC-406)
Press J/ Kto search for a station, then press .
Bookmark current song information
Press and hold the volume knob.
“BOOKMARKED” appears and the information is stored to your device.
The bookmark is available on your Pandora account but not on this unit.
Pandora®
Preparation:
Install the latest version of the Pandora application on your device
(iPhone/ iPod touch), then create an account and log in to Pandora.
• Select [
ON ] for [ PANDORA SRC ]. (  5 )
Start listening
1 Open the Pandora application on your device.
2 Connect your device to the USB input terminal.
3 Press repeatedly to select PANDORA FRONT/ PANDORA
REAR.
Broadcast starts automatically.
To On the faceplate On the remote control
Playback / pause Press . Press .
Skip a track Press T.Press .
Thumbs up or thumbs
down*3
Press J/K.Press / .
*1
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*2
Do not leave the cable inside the car when not using.
*3
If thumbs down is selected, the current track is skipped.
USB input terminal
KCA-iP102 / KCA-iP103 (optional accessory)
*1
or accessory cable of the iPod/iPhone
*2
and / or
You can also connect to the USB cable from the rear of the unit.
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 13JS_KWD_KDC_X7000DAB_XW_EN_1.indd 13 2/11/2015 11:17:14 AM2/11/2015 11:17:14 AM

14
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pandora®
Delete a station
While listening to PANDORA FRONT/ PANDORA
REAR...
1 Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select [ SYSTEM ],
then press the knob.
3 Turn the volume knob to select [ STATION DEL ],
then press the knob.
4 Turn the volume knob to select [ SORT BY A-Z ]
or [
SORT BY DATE ], then press the knob.
5 Turn the volume knob to select the desired
station to delete, then press the knob.
6 Turn the volume knob to select [ YES ], then
press the knob.
7 Press and hold to exit.
To return to the previous setting item, press
.
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
Pair and connect a Bluetooth device for the first time
1 Press to turn on the unit.
2 Search and select this unit model name (KDC-X7***DAB) on the Bluetooth device.
“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on the
display.
• For some Bluetooth devices, you may need to enter the Personal Identification Number
(PIN) code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Adjust the microphone
angle
Secure using cord clamps (not supplied)
if necessary.
Microphone input
jack
Microphone
(supplied)
Rear panel
JS_KWD_KDC_X7000DAB_XW_EN_3.indd 14JS_KWD_KDC_X7000DAB_XW_EN_3.indd 14 13/11/2015 11:36:20 AM13/11/2015 11:36:20 AM

ENGLISH 15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
• This unit supports Secure Simple Pairing (SSP).
• Up to 10 devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain
registered in the unit even if you reset the unit. To delete the paired
device,
19 , [ DEVICE DELETE ].
Once pairing is completed, Bluetooth connection is established
automatically. “BT1” and/or “BT2” on the display window lights up.
• A maximum of two Bluetooth phones and one Bluetooth audio device
can be connected at any time.
• Some Bluetooth devices may not automatically connect to the unit
after pairing. Connect the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more
information.
Auto Pairing
When you connect iPhone/ iPod touch/ Android device to the USB input
terminal, pairing request (via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device
name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [
AUTO PAIRING ] is set to [ ON ]. ( 19 )
– KENWOOD MUSIC PLAY application is installed on the Android device
(
10 ) and [ BROWSE MODE ] is selected ( 11 ).
Connect with a remote device by One-touch (NFC)
Near Field Communication (NFC) enables short-range wireless
communication between the unit and remote devices.
By holding an NFC-compatible remote device near to the N-Mark on the
unit (volume knob), the unit and remote device proceed to complete
pairing and established the BLUETOOTH connection automatically.
1 Activate the NFC function on the remote device.
Refer to the instruction manual of the remote device for more
information.
2 Hold the remote device near to the N-Mark on the unit (volume
knob).
The device vibrates when pairing is completed.
• To disconnect, hold the remote device near to the N-Mark on the unit
(volume knob) again.
• This unit only can recognize and connect to one NFC-compatible device
at a time.
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 15JS_KWD_KDC_X7000DAB_XW_EN_1.indd 15 2/11/2015 11:17:15 AM2/11/2015 11:17:15 AM

16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The unit answers the call automatically if [
AUTO ANSWER ]
is set to a selected time. ( 
17 )
During a call:
• The buttons and display illuminate according to the
settings made for [
DISPLAY ]. (  23 )
• If you turn off the unit or detach the faceplate, the
Bluetooth connection is disconnected.
The following operations may differ or not available
depending on the connected phone.
BLUETOOTH®
To On the faceplate On the remote control
First incoming call...
Answer a call Press or the volume knob
or one of the number buttons
(1to 6).
Press .
Reject a call Press .Press .
End a call Press .Press .
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press . Press .
Reject another incoming
call
Press .Press .
While having two active calls...
End current call and
activate held call
Press .Press .
Swap between the
current call and held call
Press . Press .
Adjust the phone volume
[00] to [35]
(Default:
[15] )
Turn the volume knob during
a call.
• This adjustment will not
affect the volume of the other
sources.
( Not available )
Switch between hands-free
and private talk modes
Press during a call.
• Operations may vary
according to the connected
Bluetooth device.
( Not available )
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 16JS_KWD_KDC_X7000DAB_XW_EN_1.indd 16 2/11/2015 11:17:15 AM2/11/2015 11:17:15 AM

ENGLISH 17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter [ FUNCTION ].
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
MIC GAIN –10 — +10 ( –4 ):The sensitivity of the microphone increases as the number increased.
NR LEVEL –5 — +5 ( 0 ):Adjust the noise reduction level until the least noise is being heard during
a phone conversation.
ECHO CANCEL –5
— +5 ( 0 ):Adjust the echo cancellation delay time until the least echo is being heard
during a phone conversation.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 Repeat step 2until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER 1
— 30 :The unit answers incoming call automatically in the selected time (in
seconds).;
OFF :Cancels.
BATT/SIGNAL* AUTO :Shows the strength of the battery and signal when the unit detects a Bluetooth
device and the Bluetooth device is connected.;
OFF :Cancels. Clock time is shown.
*
Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or
dialing the number. Call by voice is also possible if your
mobile phone has the feature.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2until the desired item is selected/activated
or follow the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
CALL HISTORY (Applicable only if the phone supports PBAP)
1 Press the volume knob to select a name or a phone
number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on
the lower part of the display to indicate the previous
call status.
• Press
DISP to change the display category
(NUMBER or NAME).
• “NO DATA” appears if there is no recorded call
history.
2 Press the volume knob to call.
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 17JS_KWD_KDC_X7000DAB_XW_EN_1.indd 17 2/11/2015 11:17:15 AM2/11/2015 11:17:15 AM

18
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Make a call using voice recognition
1 Press and hold to activate the voice recognition of the
connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [ CALL HISTORY ], [ PHONE BOOK ], or
[
NUMBER DIAL ], then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [
NUMBER DIAL ] in step 2
and store a blank number.
Make a call from memory
1 Press to enter Bluetooth mode.
2 Press one of the number buttons (1to 6).
3 Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
PHONE BOOK (Applicable only if the phone supports PBAP)
1 Turn the volume knob quickly to enter alphabet search mode (if the
phonebook contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
*
), press
J/ K .
• To select the desired first letter, turn the volume knob or press
S/ T , then press the knob.
Select “1” to search with numbers and select “
*
” to search with
symbols.
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob
to call.
•
The phonebook of the connected phone is automatically transferred to
the unit when pairing.
•
Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL
•
This unit can display only non-accent letters. (Accent letters such as
“Ú” is showns as “U”.)
NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #,
+).
2 Press S/ T to move the entry position.
Repeat steps
1 and 2 until you finish entering the phone number.
3 Press the volume knob to call.
(or using RC-406)
1 Press the number buttons ( 0 to 9 ) to enter the phone number.
2 Press to call.
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( 
Make a call using voice recognition )
BATT LOW / MID / FULL
*
:Shows the strength of the battery.
NO SIGNAL / LOW / MID / MAX
*
:Shows the strength of the current received signal.
*
Functionality depends on the type of the phone used.
JS_KWD_KDC_X7000DAB_XW_EN_1.indd 18JS_KWD_KDC_X7000DAB_XW_EN_1.indd 18 2/11/2015 11:17:15 AM2/11/2015 11:17:15 AM

ENGLISH 19
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Other settings
1 Press the volume knob to enter
[FUNCTION ].
2 Turn the volume knob to select an item (see the following table), then press the
knob.
3 Repeat step 2until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
XX
BT MODE
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
“
*
” appears in front of the device name when connected.
•
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio
device at any time.
AUDIO SELECT
DEVICE DELETE
1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [ YES ] or [ NO ], then press the knob.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
Repeat steps
1 and 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
RECONNECT ON :The unit automatically reconnect when the last connected Bluetooth device is
within range.;
OFF :Cancels.
AUTO PAIRING ON :The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/
Android device) when it is connected through USB input terminal.Depending on the
operating system of the connected device, this function may not work. ;
OFF :Cancels.
INITIALIZE YES :Initializes all the Bluetooth settings (including stored pairing, phonebook, and
etc.).;
NO :Cancels.
Bluetooth test mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
2 Search and select this unit model name
(KDC-X7***DAB) on the Bluetooth device.
3 Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP)
compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold to turn off the
unit.
JS_KWD_KDC_X7000DAB_XW_EN_3.indd 19JS_KWD_KDC_X7000DAB_XW_EN_3.indd 19 13/11/2015 11:36:39 AM13/11/2015 11:36:39 AM

20
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH — Audio
Audio player via Bluetooth
1 Press repeatedly (or press SRC on RC-406) to select BTAUDIO.
2 Operate the Bluetooth audio player to start playback.
To On the faceplate On the remote control
Playback / pause Press . Press .
Select group or folder Press J/ K.Press .
Reverse / Forward
skip
Press S/T.Press .
Reverse / Fast-
forward
Press and hold S/T.Press and hold .
Repeat play Press repeatedly.
ALL REPEAT , FILE REPEAT , REPEAT OFF
( Not available )
Random play Press and hold to select
ALL RANDOM .
• Press to select
RANDOM OFF .
( Not available )
Select a file from a
folder/list
Refer to “Select a file from a
folder/list” on page 11. ( Not available )
Operations and display indications may differ according to their availability on the connected
device.
BLUETOOTH®
Internet radio via Bluetooth
Listen to Pandora
You can listen to Pandora on the Android device via
Bluetooth on this unit.
Preparation:
Select [
ON ] for [ PANDORA SRC ]. (  5 )
1 Open the Pandora application on your device.
2 Connect your Bluetooth audio player via
Bluetooth connection. ( 
14 )
3 Press repeatedly to select PANDORA.
The source switches and broadcast starts
automatically.
You can operate Pandora in the same way as
Pandora for iPod/iPhone. ( 
13 )
JS_KWD_KDC_X7000DAB_XW_EN_2.indd 20JS_KWD_KDC_X7000DAB_XW_EN_2.indd 20 12/11/2015 11:28:53 AM12/11/2015 11:28:53 AM