Kenwood KDC-U7053BT User manual

KDC-U7053BT
KDC-U7053BTL
CD-RECEIVER
Quick Start Guide
B59-2129-10/01(MW)© 2011 JVC KENWOOD Corporation
B59-2129-10_01_12Stepup_QSG_M.indd 1 12/01/20 9:30

2|Quick Start Guide
Contents Before use
2WARNING
To prevent injuries or a fire, take
the following precautions:
• Stopthecarbeforeoperatingtheunit.
• Topreventashortcircuit,neverputor
leaveanymetallicobjects(suchascoins
ormetaltools)insidetheunit.
¤CAUTION
• Adjustthevolumesothatyoucanhear
soundoutsidethecar.Drivingwiththe
volumeadjustedtoatoohighlevelmay
causeanaccident.
• Wipeoffthedirtonthepanelwithadry
siliconorsoftcloth.
Failuretoobservethisprecautionmay
resultindamagetothemonitororunit.
Cleaning the connector
Theunitmaynotfunctionproperlyifthe
connectorbetweentheunitandfaceplate
aredirty.Detachthefaceplateandcleanthe
connectorwithacottonswabgently,being
carefulnottodamagetheconnector.
Connector
Condensation
Whenthecarisair-conditioned,moisture
maycollectonthelaserlens.Thismaycause
discreaderrors.Inthiscase,removethedisc
andwaitforthemoisturetoevaporate.
Notes
• Ifyouexperienceproblemsduring
installation,consultyourKenwooddealer.
• Whenyoupurchaseoptionalaccessories,
checkwithyourKenwooddealertomake
surethattheycanworkwithyourmodel
andinyourarea.
• CharactersthatconformtoISO8859-1
canbedisplayed.
Before use ............................................................. 2
Preparations ......................................................... 4
Basic operations.................................................. 6
Playing music (CD/USB/iPod)......................... 7
Listening to the radio ....................................... 8
Hands-free phoning.......................................... 9
Installation accessories...................................10
Before installation............................................10
Connecting wires to terminals....................12
Installation/Removal of the unit.................14
Installing the Microphone Unit ..................15
Appendix ............................................................15
B59-2129-10_01_12Stepup_QSG_M.indd 2 12/01/20 9:30

English |3
Before use
• Todisplaycharactersinthefollowing
language,additionalsettingisrequired.
KDC-U7053BT 
-Chinese
Referto“Chinese”of<Initialsettings>
(page21).
KDC-U7053BTL 
-Arabic
-Persian
-Thai
Referto“TAGLanguage”of<Initial
settings>(page21).
About the discs used with this unit
• ThisunitcanonlyplaytheCDswith
.
• Thefollowingdiscscannotbeused:
- Adiscthatisnotround
- Adiscwithcoloringontherecording
surfaceoradiscthatisdirty
- Arecordable/rewritablediscthathas
notbeenfinalized(Forthefinalization
process,refertotheinstructionmanual
thatcamewithyourdiscwriting
softwareoryourdiscrecorder.)
- An8cm(3inch)disc(Anattempt
toinsertusinganadaptercancause
malfunction.)
Handling discs
• Donottouchtherecordingsurfaceof
thedisc.
• Donotsticktapeetc.onthedisc,orusea
discwithtapestuckonit.
• Donotuseanyaccessoriesforthedisc.
• Donotuseanysolventstocleandiscs.
Useadrysiliconorsoftcloth.
• Cleanthediskbymovingthecloth
outwardfromthecenterofthedisc.
• Whenremovingadiscfromthisunit,pull
itouthorizontally.
• Ifthecenterholeoroutsiderimofadisc
hasburrs,removethembeforeinserting
adisc.
How to reset your unit
Iftheunitfailstooperateproperly,pressthe
Resetbutton.Theunitreturnstothefactory
settingswhentheResetbuttonispressed.
Reset button
¤CAUTION
• Keepbatteryoutofreachofchildren
andinoriginalpackageuntilreadyto
use.Disposeofusedbatteriespromptly.
Ifswallowed,contactaphysician
immediately.
• Donotleavethebatterynearfireor
underdirectsunlight.Afire,explosion
orexcessiveheatgenerationmayresult.
• Donotsettheremotecontrolinhot
placessuchasonthedashboard.
• TheLithiumbatteryisindangerof
explosionifreplacedincorrectly.
Replaceitonlywiththesameor
equivalenttype.
The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may differ
from what appears on the display on the actual
equipment, and some of the images on the display
may be inapplicable.
B59-2129-10_01_12Stepup_QSG_M.indd 3 12/01/20 9:30

4|Quick Start Guide
Preparations
Before using this unit for the first
time
When this unit is first turned on, the
interactive menu appears for setting the
interface language and demonstration
mode. This menu disappears when no
action is taken for 15 seconds.
 KDC-U7053BTL only:
Selecttheinterfacelanguagetodisplay
themenuitemsoftheFunctionsetting,
fromEnglishandPersian.
TurntheControlknobtoselectthe
language,andthenpresstheControl
knob.
 KDC-U7053BTL only:
IfyouselectedEnglishinstep1,select
thelanguagetodisplaytheaudiofile
information,fromEnglish,Arabicand
Thai.(Persianisautomaticallyselectedif
youselectedPersianinstep1.)
 PresstheControlknobwhenthe
message“TocancelDEMOPressthe
volumeknob”isdisplayed.
 TurntheControlknobtoselect“YES”,and
thenpresstheControlknob.
Theinterfacelanguageand
demonstrationmodecanalsobe
setwiththeFunctionsetting.Refer
to<Initialsettings>(page21)and
<Demonstrationmodesetting>(page
20)ofInstructionmanual
Control knob (Volume knob)Release
[DISP]
B59-2129-10_01_12Stepup_QSG_M.indd 4 12/01/20 9:30

English |5
Preparations
Adjusting the clock
 Pressthe[DISP]buttonseveraltimesto
displaytheclock.
 Pressandhold[DISP]button.
 TurntheControl knobtoadjustthe
hour,andthenpresstheControl knob.
 TurntheControl knobtoadjustthe
minute,andthenpresstheControl
knob.
Detaching/ Reattaching the
faceplate
PresstheRelease
button.
¤
• Removethefaceplateatonceafter
pressingtheReleasebutton;otherwiseit
canfalldownduetovibration.
• Thefaceplateisaprecisioncomponentof
theunitandcanbedamagedbyshocks
orjolts.
• Keepthefaceplateinitscasewhile
detached.
• Donotplacethefaceplate(andcase)in
areasexposedtodirectsunlight,excessive
heatorhumidity.Alsoavoidplaceswith
toomuchdustorthepossibilityofwater
splashing.
B59-2129-10_01_12Stepup_QSG_M.indd 5 12/01/20 9:30

6|Quick Start Guide
Basic operations
Power
Turnthepoweronbypressingthe[SRC]
button.
Pressandhold[SRC]buttontoturnthe
poweroff.
Source selection
Pressingthe[SRC]buttonrepeatedly
switchesamongsources.
Source Display
Standby “STANDBY”
Tuner “TUNER”
Bluetooth audio “BT AUDIO”
USB or iPod “USB”or“iPod”
CD “CD”
Auxiliary Input “AUX”
Pressthe[iPod]buttontoswitchthe
sourcetoiPod.
Thesource“iPod”and“CD”canbe
selectedwhenitisreadytoplay.
Volume
TurntheControl knobtoadjustthe
soundvolume.
USB terminal
AUSBdeviceoriPodcanbeconnected.
TheCA-U1EXorKCA-iP102(optional
accessories)isrecommendedtoconnect
aUSBdeviceoriPod.
Auxiliary input
Aportableaudiodevicecanbe
connectedwithastereomini-plug(3.5
mmø).
Display selection
Pressingthe[DISP]buttonrepeatedly
switchesamong5typesofdisplay.
Youcanselecttheinformationtobe
displayed.Referto<Displaysettings>
(page16)inInstructionmanual.
Display scroll
Keepthe[DISP]buttonpresseddown
toscrollthroughtheCDoraudiofiletext
display.
[DISP]
[SRC] [iPod]
Auxiliary input
USB terminal
Control knob
B59-2129-10_01_12Stepup_QSG_M.indd 6 12/01/20 9:30

English |7
Playing music (CD/USB/iPod)
Playing a disc
InsertadiscintheDisc slot.
Whenitisinserted,thesourceis
switchedautomaticallyandplayback
starts.
Playing a USB device/ iPod
ConnectaUSBdeviceoriPodtotheUSB
terminal.
Whenitisconnected,thesourceis
switchedautomaticallyandplayback
starts.
(USBterminalMaximumSupplycurrent:
DC5V 1A)
Selecting an audio file folder
PushtheControl knobupwardor
downwardtoselectafolder.
Selecting a song
PushtheControl knobrightwardor
leftwardtoselectasong(trackorfile).
Fast-forwarding or fast-
backwarding a song
PushandholdtheControl knob
rightwardorleftwardtofast-forwardor
fast-backwardthesong(trackorfile).
Pause and play
Pressthe[ ]buttontointerruptor
resumeplayingasong(trackorfile).
Music search
You can search for the song you want to
play.
 Pressthe[ ]button.
 Searchforasong.
Operation type Operation
Movement between items Turn the Control knob.
Selection of item Press the Control knob.
Return to previous item Press the []button.
Tocancelmusicsearchinaudiofilesor
iPod,Pressandhold[ ]button.
Removing disc
Pressthe[0]buttontoejectadisc.
Removing USB device/ iPod
Pressthe[SRC]buttontoswitchthe
sourcetoadeviceotherthanUSBand
iPod,andthenremovetheUSBdevice.
DatacontainedintheUSBdevice/iPod
maybedamagedifyouremoveitwhen
itisusedastheactivesource.
[SRC]
[ ]
[0]
[ ]
USB Terminal
Control knob Disc slot
B59-2129-10_01_12Stepup_QSG_M.indd 7 12/01/20 9:30

8|Quick Start Guide
Listening to the radio
Selecting a tuner source
Pressthe[SRC]buttontoselect“TUNER”.
Selecting a band
PushtheControl knobdownwardto
selectaband(FMorAM).
Selecting a station
PushtheControl knobleftwardor
rightwardtoselectthestationyouwant
tolistento.
Thetuningmodecanbechanged.
Referto<Tunersetting>(page14)in
Instructionmanual
Station preset memory
 PushtheControl knobdownwardto
selectaband(FMorAM).
 PushtheControl knobleftwardor
rightwardtoselectthestationyouwant
tosaveinthestationpresetmemory.
 Pressthe[PRESET]button.
Pressthe[PRESET]buttonagaintoenter
theMixStationpresetmode.Inthis
mode,FMandAMcanbesavedinthe
samepresetlayer,whichallowsyouto
recalladesiredstationwithoutswitching
betweenbandsand/ortunersources.
Maximumof6stationscanbepresetin
theMixStationpresetmode.
 TurntheControl knobtoselectpreset
number(FM:“1”–“18”,AM:“1”–“6”),and
thenpressandholdControl knob.
Recalling the stations in the
memory
 PushtheControl knobdownwardto
changetheband(FMorAM).
 Pressthe[PRESET]button.
 TurntheControl knobtoselectapreset
number(FM:“1”–“18”,AM:“1”–“6”),and
thenpresstheControl knob.
MIntheMixStationpresetmode,band
namesoftunersourcesaredisplayedas
follows:
FM:FMbroadcaststation
AM:AMbroadcaststation
[SRC] [PRESET]
Control knob
B59-2129-10_01_12Stepup_QSG_M.indd 8 12/01/20 9:30

English |9
Hands-free phoning
Registering a Bluetooth device
Register your Bluetooth device in this unit.
 Pressandhold[ ]button.
ThesearchforaBluetoothdevicestarts.
Ittakesawhile(tensofsecondsor
severalminutes)tocompletethesearch.
 PresstheControl knobwhenthemodel
nameoftheBluetoothdeviceyouwant
toregisterisdisplayed.
 EnterthePINcodeofyourBluetooth
device.
Operation type Operation
Select a number. Turn the Control knob.
Move to the next digit. Push the Control knob
rightward.
Delete the last digit. Push the Control knob
leftward.
Transmit the PIN code. Press the Control knob.
ConnectiontoyourBluetoothdevice
starts,“PairingSuccess”isdisplayeda
whilelater,andthentheprevioussource
isselected.
Whenregistrationofyourcell-phone
iscompleted,thephonebookofthe
cell-phoneisautomaticallydownloaded
tothisunit.(Ifthephonebookhasnot
beendownloadedtothisunit,operate
thecell-phonetodownloadit.)
Dialing a number in the phone
book
Dial the phone number in the phone book
of your cellphone.
If the phone book has not been
downloaded to this unit, operate the
cellphone to download it.
 Pressthe[ ]button.
 TurntheControl knobandpressit
when“PhoneBook”isdisplayed.
 TurntheControl knobtoselectaphone
number.
PushtheControl knobrightwardor
leftwardtoselectthenameofthecalled
party.
Operation type Operation
Select a phone number. Turn the Control knob.
Select the initial. Push the Control knob
upward or downward.
Determine the phone number. Press the Control knob.
 Pressthe[ ]button.
Answering a phone call
Pressthe[ ]button.
Disconnecting a call
Pressthe[ ]button.
[ ] [ ]
Control knob
B59-2129-10_01_12Stepup_QSG_M.indd 9 12/01/20 9:30

10 |Quick Start Guide
2WARNING
• Theunitcanonlybeinstalledinacarwith
a12VDCpowersupply,negativeground.
• Ifyouconnecttheignitionwire(red)
andthebatterywire(yellow)tothecar
chassis(ground),youmaycauseashort
circuit,thatinturnmaystartafire.Always
connectthosewirestothepowersource
runningthroughthefusebox.
¤CAUTION
• Installthisunitintheconsoleofyour
vehicle.
• Donottouchthemetalpartsofthisunit
duringandshortlyafteruseoftheunit.
Metalpartssuchastheheatsinkand
enclosurebecomehot.
• Mountingandwiringthisproduct
requiresskillsandexperience.Forsafety’s
sake,leavethemountingandwiringwork
toprofessionals.
• Ifyouexperienceanyproblemduring
installation,consultyourKenwooddealer.
• Disconnectthebattery’snegativeterminal
beforeinstallingtheunit.
• Insulateunconnectedwireswithvinyl
tapeorothersimilarmaterials.Toprevent
ashortcircuit,donotremovethecapson
theendsoftheunconnectedwiresand
terminals.
• Besuretogroundthisunittothecar’s
chassisagainaftermounting.
• Ifthefuseblows,firstmakesurethewires
arenottouchingotherpartstocausea
shortcircuit,andthenreplacetheoldfuse
withonewithanewthesamerating.
• Whenconnectingonlytwospeakers,
connecttheconnectorseithertoboth
ofthefrontoutputterminalsortoboth
oftherearoutputterminals(donotmix
frontandrearterminals).Forexample,if
youconnectthe+connectoroftheleft
speakertoafrontoutputterminal,do
Before installationInstallation accessories
1
.....1

2
.....2

3
.....4

4
.....4

5
.....1 (3m) 

B59-2129-10_01_12Stepup_QSG_M.indd 10 12/01/20 9:30

English |11
notconnectthe - connectortoarear
outputterminal.
• Connectthespeakerwirescorrectlytothe
correspondingterminals.Theunitmay
bedamagedorfailtoworkifyoushare
the - wiresorgroundthemtoanymetal
partinthecar.
• Donotuseyourownscrews.Useonly
thesuppliedscrews.Usingwrongscrews,
coulddamagetheunit.
• Ifyourcar’signitionkeyswitchdoes
nothaveanACCposition,connectthe
ignitionwirestoapowersourcethatcan
beturnedonandoffwiththeignition
key.Ifyouconnecttheignitionwiresto
aconstant-voltagepowersource,aswith
batterywires,thebatterymaydie.
• Iftheconsolehasalid,makesureto
installtheunitsothatthefaceplatewill
nothitthelidwhenitisclosedoropened.
• Aftertheinstallingtheunit,check
whetherthebrakelamps,blinkers,wipers,
etc.onthecarareworkingproperly.
• Mounttheunitsothatthemounting
angleis30°orless.
• Receptionmaybecomepoorifthereare
metalobjectsneartheBluetoothantenna.
Bluetooth antenna unit
For Good Reception
Toassuregoodreception,notethe
following:
• Communicatewiththecell-phonewithin
theline-of-sightdistanceof10m(30
ft).Thecommunicationrangebecomes
shorterdependingonthesurrounding
environment.Thecommunication
rangealsobecomesshorterwhenthere
isanobstaclebetweenthisunitand
thecell-phone.Theabovemaximum
communicationrange(10m)isnot
alwaysassured.
• Abroadcaststationorwalkie-talkie
locatednearbycaninterferewith
communicationduetoatoostrong
signal.
Before installation
B59-2129-10_01_12Stepup_QSG_M.indd 11 12/01/20 9:30

P.CONT
ILLUMI
REMOTE CONT
REMOTE INPUT
STEERING WHEEL
ANT.
CONT
MUTE
–
+
FRONTSW REAR
L
R
L
R
12 |Quick Start Guide
Connecting wires to terminals
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
Tofrontleftspeaker
Tofrontrightspeaker
Torearrightspeaker
Torearleftspeaker
Red(Ignitionwire)
Yellow(Batterywire)
Black(Groundwire)·(Tocarchassis)
Ignitionkey
switch
Carfusebox
(Mainfuse)
ACC
Carfuse
box
Battery
⁄
• SpeakerImpedance:4–8Ω
B59-2129-10_01_12Stepup_QSG_M.indd 12 12/01/20 9:30

P.CONT
ILLUMI
REMOTE CONT
REMOTE INPUT
STEERING WHEEL
ANT.
CONT
MUTE
–
+
FRONTSW REAR
L
R
L
R
English |13
Connecting wires to terminals
FM/AMantennainput
Frontoutput
Fuse(10A)
Subwooferoutput
Rearoutput
Wiringharness
(Accessory1)
Ifnoconnectionsaremade,donotletthewirecomeoutfrom
thetab.
Blue/White
(Powercontrolwire)
Blue(Antennacontrolwire)
Orange/White
(Dimmercontrolwire)
Whenusingtheoptionalpoweramplifier,
connectthiswiretoitspowercontrol
terminal.
Tocarlightcontrolswitch
ToconnecttheKenwoodnavigation
system,consultyournavigationmanual.
Dependingonwhatantennayouare
using,connecteithertothecontrol
terminalofthemotorantenna,ortothe
powerterminalfortheboosteramplifierof
thefilm-typeorshortpoletypeantenna.
(Max.300mA,12V)
Tousethesteeringwheelremotecontrol
feature,anexclusiveremoteadapter(not
supplied)thatmatchesyourcarisrequired.
LightBlue/Yellow
(Steeringremotecontrolwire)
Black(Groundwire)·(Tocarchassis)
Microphone(Accessory5)
Brown(Mutecontrolwire)
B59-2129-10_01_12Stepup_QSG_M.indd 13 12/01/20 9:30

14 |Quick Start Guide
Installation/Removal of the unit
Non-Japanese cars
Bend the tabs of the mounting sleeve
with a screwdriver or the like and
attach it in place.
⁄
• Makesurethattheunitisinstalled
securelyinplace.Iftheunitisunstable,it
maymalfunction(forexample,thesound
mayskip).
Japanese cars
 Removethehardrubberframewith
referenceto<Removingthehardrubber
frame>.
 Aligntheholesintheunit(twolocations
oneachside)withthevehiclemounting
bracketandsecuretheunitwiththe
accessoryscrews.
8 mm
MAX.
ø5mm ø5mm
8mm
MAX.
T
NT
N
T/N
T: Toyota cars
N: Nissan cars
Accessory3...for Nissan car
Accessory4...for Toyota car
34
Removing the hard rubber frame
 Engagethecatchpinsontheremoval
toolandreleasethetwolocksonthe
upperpartofframe.
Liftupandpulltheframeforwardas
showninthefigure.
Catch
Lock
Removal tool (Accessory2)
 Whentheupperpartofframeis
removed,removethelowerpartofframe.
⁄
• Theframecanberemovedfromthe
bottomsideinthesamemanner.
Removing the unit
 Removethehardrubberframewith
referenceto<Removingthehardrubber
frame>.
 Removethefaceplate.
 Insertthetworemovaltoolsdeeplyinto
theslotsonbothsidesasshown.
 Lowertheremovaltooltowardthe
bottom,andthenpullouttheunit
halfwaywhilepressingtheremovaltool
towardstheinside.
Accessory2
¤
• Becarefultoavoidinjuryfromthecatch
pinsontheremovaltool.
 Pulltheunitallthewayoutwithyour
hands,beingcarefulnottodropit.
B59-2129-10_01_12Stepup_QSG_M.indd 14 12/01/20 9:30

English |15
Installing the
Microphone Unit
 Checktheinstallationpositionofthe
microphone(accessory5).
 Removeoilandotherdirtfromthe
installationsurface.
 Installthemicrophone.
 Laythecableuptotheunitwithit
securedatseveralpositionsusingtape
orthelike.
⁄
• Installthemicrophoneasfaraspossible
fromthecell-phone.
Peel off the release coated
paper of double-face adhe-
sive tape to secure the
microphone on the place
shown above.
Turn the microphone
toward the driver.
Fix a cable with a commercial item of tape.
Accessory5
Appendix
About Audio file
• PlayableAudiofiles
AAC-LC(.m4a),MP3(.mp3),WMA(.wma)
• Playablediscmedia
CD-R/RW/ROM
• Playablediscfileformats
ISO9660Level1/2,Joliet,Romeo,Long
filename.
• PlayableUSBdevices
USBmassstorageclass
• PlayableUSBdevicefilesystems
FAT16,FAT32
Theonlinemanualabout
audiofilesisputonthesite,
www.kenwood.com/cs/ce/audiofile/.
Models of iPods/iPhones that can
be connected to this unit
Madefor
• iPodtouch(4thgeneration)
• iPodtouch(3rdgeneration)
• iPodtouch(2ndgeneration)
• iPodtouch(1stgeneration)
• iPodclassic
• iPodwithvideo
• iPodnano(6thgeneration)
• iPodnano(5thgeneration)
• iPodnano(4thgeneration)
• iPodnano(3rdgeneration)
• iPodnano(2ndgeneration)
• iPodnano(1stgeneration)
• iPhone4S
• iPhone4
• iPhone3GS
• iPhone3G
• iPhone
Forinformationonthecompatibilityof
iPod/iPhonesoftware,visitwww.kenwood.
com/cs/ce/ipod/.
B59-2129-10_01_12Stepup_QSG_M.indd 15 12/01/20 9:30

• TheBluetoothwordmarkandlogosare
ownedbytheBluetoothSIG,Inc.and
anyuseofsuchmarksbyJVCKENWOOD
Corporationisunderlicense.Other
trademarksandtradenamesarethoseof
theirrespectiveowners.
• The“AAC”logoisatrademarkofDolby
Laboratories.
• “MadeforiPod”and“MadeforiPhone”
meanthatanelectronicaccessoryhas
beendesignedtoconnectspecifically
toiPodoriPhone,respectively,andhas
beencertifiedbythedevelopertomeet
Appleperformancestandards.Appleisnot
responsiblefortheoperationofthisdevice
oritscompliancewithsafetyandregulatory
standards.Pleasenotethattheuseofthis
accessorywithiPodoriPhonemayaffect
wirelessperformance.
• iPhone,iPod,iPodclassic,iPodnano,and
iPodtoucharetrademarksofAppleInc.,
registeredintheU.S.andothercountries.
• Adobe,AcrobatandReaderareeither
registeredtrademarksortrademarksof
AdobeSystemsIncorporatedintheUnited
Statesand/orothercountries.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
Thelabelisattachedtothechassis/caseandsays
thatthecomponentuseslaserbeamsthathave
beenclassifiedasClass1.Itmeansthattheunit
isutilizinglaserbeamsthatareofaweakerclass.
Thereisnodangerofhazardousradiationoutside
theunit.
B59-2129-10_01_12Stepup_QSG_M.indd 16 12/01/20 9:30