Kenwood TK-3202-1 User manual

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
INSTRUCTION MANUAL
TK-2202/TK-3202-1/TK-3202-2
THANK YOU!
WearegratefulyouchoseKENWOODforyourlandmobileradio applications.Webelievethiseasy-to-usetransceiverwillprovide
dependablecommunicationstokeeppersonneloperatingatpeakefficiency.
KENWOODtransceiversincorporatethelatestinadvancedtechnology.As aresult,wefeelstronglythatyouwillbepleasedwiththe
qualityandfeaturesof thisproduct.
NOTICES TO THE USER
WARNING:
** GOVERNMENTLAWPROHIBITSTHEOPERATIONOFUNLICENSEDRADIOTRANSMITTERSWITHINTHE
TERRITORIESUNDERGOVERNMENTCONTROL.
**ILLEGALOPERATION ISPUNISHABLEBYFINE ORIMPRISONMENT ORBOTH.
** REFERSERVICETO QUALIFIEDTECHNICIANSONLY.
** DONOTOPERATEYOURTRANSCEIVERINEXPLOSIVEATMOSPHERES(GASES,DUST,FUMES,ETC.).
** TURNOFFYOURTRANSCEIVERWHILETAKINGONFUEL,ORWHILEPARKEDINGASOLINESERVICESTATIONS.
SAFETY:
Itisimportantthattheoperatorisawareofandunderstandshazardscommontotheoperationofanytransceiver.
WARNING:
EXPLOSIVEATMOSPHERES(GASES,DUST,FUMES,etc.)
Turnoffyourtransceiverwhiletakingonfuel,orwhileparkedingasolineservicestations.
Oneormoreofthefollowingstatementsmaybeapplicable:
FCCWARNING
Thisequipmentgeneratesorusesradiofrequencyenergy.Changesormodifications tothisequipmentmaycauseharmfulinterference
unlessthemodificationsareexpresslyapprovedintheinstructionmanual.Theusercouldlosetheauthoritytooperatethisequipmentif
anunauthorizedchangeormodificationismade.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC
Thisequipmenthasbeentestedandfound tocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15of theFCCRules.
Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgenerates,usesandcangenerateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe
instructions,maycauseharmfulinterferencetoradiocommunications.
However,thereisnoguaranteethattheinterferencewillnotoccurin aparticularinstallation.Ifthisequipmentdoescauseharmful
interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotry
tocorrecttheinterferencebyoneormoreofthefollowingmeasures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhich thereceiverisconnected.
•Consultthedealerfortechnicalassistance.

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
ATTENTION(U.S.A.Only):
TheRBRCRecyclesealfoundonKENWOODnickel-metalhydride(Ni-MH)batterypacks
indicatesKENWOOD’svoluntaryparticipationinanindustryprogramtocollectandrecycle
Ni-MHbatteriesaftertheiroperatinglifehasexpired.TheRBRCprogramisanalternativeto
disposingNi-MHbatterieswithyourregularrefuseorinmunicipalwastestreams,whichisillegal
insomeareas.
ForinformationonNi-MHbatteryrecyclinginyourarea,call(tollfree)1-800-8-BATTERY
(1-800-822-8837).KENWOOD’sinvolvementinthisprogramispartofourcommitmentto
preserveourenvironmentandconserveournaturalresources.
UNPACKING AND CHECKING EQUIPMENT
Note:
Thefollowingunpackinginstructionsareforusebyyour
KENWOODdealer,anauthorizedKENWOODservicefacility,orthefactory.
Carefullyunpackthe transceiver.Werecommendthatyouidentifytheitemslistedinthefollowingtablebeforediscardingthepacking
material.Ifanyitemsaremissingorhavebeendamagedduringshipment,fileaclaimwiththecarrierimmediately.
** Accessories
Quantity
Item PartNumber TK-2202 TK-3202-1 TK-3202-2
InstructionManual B62–1762-*0 1 1 1
BeltHook J29–0712-08 1 1 1
ScrewSet N99-2043-05 1 1 1
Cap B09–0680-*3 1 1 1
Holder J19–5472-*3 1 1 1
HelicalAntenna T90–1036-*5 1
WhipAntenna T90–1039-*5 1
WhipAntenna T90–1040-*5 1
BatteryAssy. W09–1000-*5 1 1 1
Charger W08–0969-*5 1 1 1
ACAdapter W08–0970-*5 1 1 1
Pamphlet B59–2371-*0 1 1 1

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
Installing/ Removing the Optional Battery PackPREPARATION
Thebatterypackisnotchargedatthefactory;chargeitbeforeuse.
CAUTION:
** DONOTRECHARGETHEBATTERYPACKIFITISALREADYFULLYCHARGED.DOINGSOMAYCAUSETHELIFEOF
THEBATTERYPACKTOSHORTENORTHEBATTERYPACKMAYBEDAMAGED.
** AFTERRECHARGINGTHEBATTERYPACK,DISCONNECTITFROMTHECHARGER.IFTHECHARGERPOWERIS
RESET(TURNEDONAFTERBEINGTURNEDOFF),RECHARGINGWILLSTARTAGAINANDTHEBATTERYPACKWILL
BECOMEOVERCHARGED.
** DONOTSHORTTHEBATTERYTERMINALS ORDISPOSE OFTHEBATTERYBYFIRE.
** NEVERATTEMPTTOREMOVETHECASINGFROMTHEBATTERYPACK.
1Match theguides ofthebatterypackwiththecorrespondinggroovesontheupperrearofthetransceiver,thenfirmlypress thebattery
packt
2Toremovethebatterypack,liftthesafetycatch,pressthereleaselatch,thenpullthebatterypackawayfromthetransceiver.

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
Installing the Antenna
Screwtheantennaintotheconnectoronthetopofthetransceiverbyholdingtheantennaatitsbaseand
turningitclockwiseuntilsecure.
Installing the Belt Clip
Usingthe2screws,affixthebeltclipinplace.

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
Installing the Cap over the Speaker/Microphone Jacks
Ifyouarenotusinganoptionalspeaker/microphone,installthecapovertheSP/MICjacksusingthesuppliedscrew.
Note:
Tokeepthetransceiverwaterresistant,youmustcovertheSP/MICjackswiththecaporthecaporthespeaker/microphoneconnector.
Installing the Optional Speaker/ Microphone
1Insertthespeaker/microphoneplugsintotheSP/MICjacks.
2Installthespeaker/microphonelockingHolderovertheplugsusingthesuppliedscrew.

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
GETTING ACQUAINTED
Knob
NO. Name Lock/
NonLock Description
1 Powerswitch/
Volume control
Lock/
NonLock PowerSW (CCW:PowerOFF) AudioVolumeadjuster
2 Selectorswitch Lock ChannelSelector
Switch
Fig.1LeftSide Fig.2Front
<Leftside>
NO. Name Lock/
NonLock Description
1 PTT NonLock TXON/OFF
2 Side1 NonLock Programmable default:NoFunction
3 Side2 NonLock Programmable default:MonitorMomentary
LED
NO. Name Description
1 LED
TheLEDisthreecolors.
Lights green while receiving at user mode.Lights red while transmitting,flashes
red when the battery power is low while transmitting.Lights orange when
individualcalled.
PTT
PF1
PF2
Selectableknob
V
olume

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
TERMINAL
SP/MICjacks
SP/MICcoveringforblindfoldmodeofresinispossible.
NO. Name Description I/O
1 PTT/RXD PTTinput/Serialdatainput I
2 MIC MICinput I
3 MICIN TointernalMIC -
4 OPTDET OptionDetect I
5 5MS 5Voutput O
6 AE AudioEarth -
7 TXD Serialdataoutput O
8 NC NoConnect -
9 SPO AFpoweroutput O
10 SPI TointernalSP -
BatteryTerminal
It’stypeofspringplate.Theminusterminalconnecttochassisground
It’smountedtorearsideofradioandmountinginstructionisslidemethod.
OTHER
Rear Arailandahookforbatteryinstallation.
Spacewhichaffixesnameplate.Modelnameplate
Screwholesforbelthookinstallation.
Bottom
Batteryreleaselever

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
Appearance

TK-2202 FCC ID:ALH36913210 IC:282D-36913210
TK-3202-1 FCC ID:ALH36923210 IC:282D-36923210
TK-3202-2 FCC ID:ALH36923220
OPERATING BASICSATING BASICS
** Switching Power ON/OFF
TurnthePower switch/VolumecontrolclockwisetoswitchthetransceiverON.
TurnthePower switch/VolumecontrolcounterclockwisetoswitchthetransceiverOFF.
** AdjustingtheVolume
RotatethePowerswitch/Volumecontroltoadjustthevolume.
** SelectingaChannel
RotatetheChannelselectortoselectachannel.
Clockwiseincreasesthechannelnumberandcounterclockwisedecreasesit.
** MakingaCall
1Selectthedesiredchannel.
2Pressand holdthePTT switch,thenspeakintothemicrophoneinyournormal voice.
3Forbestresults,holdthemicrophoneapproximately3to4cm(11/2inches)fromyourlips.
4ReleasethePTTswitchtoreceive.
AUXILIARY FEATURES
** Time-out Timer (TOT)
The TOT is used to automatically inhibit transmission after a specified time elapse. If the PTT switch is held down for longer than
specified time, the transceiver will stop transmitting and a tone will sound. Release the PTT switch, then press it again to continue
transmitting.