Kessil AP700 User manual

INSIDE THE BOX
AP700 X 1
USB CABLE X 1
POWER ADAPTER X 1
ADAPTER CABLE X 1
BRACKET X 4
NAVIGATION
ABCD
K J
LM N N
E
F F FG H I
A Power - Turn the AP700 on or off.
B Intensity - Adjust the intensity of the light.
CColor - Adjust the color of the light.
DProgram - Cycle through custom programs.
E Vent
FScrew
G Top Cover
HFan(Air Inlet)
I Power Cord
JLED Array
K USB Port
LPower Indicator
M WiFi Indicator
NMounting Guide
SAFETYINSTRUCTIONS
PRODUCT SPECIFICATIONS
1. DO NOT use a power supply outside the specifications.
This is a fire hazard and may lead to unit failure
2. DO NOT use outdoors. This unit is intended for indoor
use only.
3. DO NOT expose unit to an extremely humid environment
or submerse unit in water. This may lead to unit failure.
4. DO NOT place working illuminator in close contact with
any objects. This may cause objectsto heat up and the
unit to overheat.
5. KEEPlens away from sharp objects. Sharp objects
may break the lens and lead to unit failure.
6. DO NOT cover or place objects on the power supply.
Power supply should not be contained in an airtight
space.
7. ENSUREthat the light is correctly mounted.
Illuminator
Listed Power Supply
Power Consumption 185W maximum
48V DC ± 5%Input Voltage
Input
Output
100-240V AC 50-60 Hz
48V DC, maximum 4.2A
1. N’UTILISEZ PAS de câble d’alimentation ne correspondant
pas aux caractéristiques. Il y aurait un risque d’incendie et de
dommages de l’unité.
2. NE PAS UTILISER à l’extérieur. Cette unité est prévue pour
une utilisation en intérieur.
3. N’EXPOSEZ PAS l’unité à un environnement extrêmement
humide ou ne submergez pas l’unité dans l’eau. Cela pourrait
endommager l’unité.
4. NE PLACEZ PAS l’illuminateur en marche, en contact direct
avec d’autres objets. Cela pourrait causer un réchauffement
trop élevé de ces derniers et pourrait faire surchauffer l’unité.
5. GARDEZ la lentille (H) à l‘écart des objets pointus. Les objets
pointus pourraient casser la lentille et endommager l’unité.
6. NE RECOUVREZ PAS, ou ne placez pas d’objet sur le câble
d’alimentation. Le câble ne doit pas se trouver dans un espace
fermé.
7. Capitalize que la lampe est correctement montée/fixée
INSTRUCTIONS DE SECURITE
AP700
OWNER’S MANUAL
LED ILLUMINATOR

Wireless Control: The Kessil App is compatible with iOS
device. To download your respective version, open the App
Store on your device and search for "Kessil WiFi Controller".
You can also scan the QR Code below to access the app
download.
App Operation: Once you have downloaded the app, follow
the instructions listed toconnect and operate the light.
Kessil WiFi Controllerios
TROUBLESHOOTING GUIDE
MAINTENANCE
1. Keep the air intake hole, venting holes, and fan clear of
dust. Perform regular cleanings with compressed air.
Unplug the unit and insert the tip of a CO2canister Into
one of the venting holes. Hold and spray. You may also
gently vacuum out the dust through the venting holes.
2. Keep the lens clean. If the lens becomes contaminated
with water, dust or other particles, unplug the unit and
clean the lens with isopropyl alcohol. Wet a cotton
swab or napkin with the isopropyl alcohol and gently
wipe the surface of the lens. The light can be turned on
once the lens is fully dry.
Problem
Lightdoesn’t
turn ON
Unitis
flickering
Buttons are
not responsive
Make sure the unit is connected to the
power supply and that the power supply is
plugged into an outlet with the correct
specifications.
Make sure the correct power supply is being
used.
Make sure the unit has not overheated by
operating at atemperature
above 100°F/40°C.
Make sure the correct power supply is being
used.
Make sure electrical power is available to
the AC outlet being used.
Make sure the device is operating within the
specified operating temperature.
Make sure the fan is operating properly.
Make sure to operate the light with dry
hands.
Cause / Solution
Cycle through programs by using the button.
Default programs can be customized through the
app.
Step 4 Program
Step 5
Cleaning
Mounting
You may manually adjust the intensity and color
using the buttons located on the AP700.
Step 3 Manual Control
COLOR
A
B
C
LIGHT BODY CORD (2.5M/8.2ft)A
WATERPROOF CONNECTORB
POWER ADAPTER AC IN : 100~240V
DC OUT : 48V 5A
C
GETTING STARTED
Connect the AP700 to the power adaptor and plug
it into a wall outlet. The LED indicator will be red to
indicate standby mode.
Step 1 Start Lamp
Touch the button to turn on the AP700. Touching
the button once more will shut the light off.
Turn off the AP700, remove the eight perimeter screws from the
AP700 using a 3/32”(2.5mm) hex wrench.Set aside the top cover
and gently clean the inside using a dry brush. Ensure the inside is
clear of debris before reinstalling the top.
Suspension Kit mounting is shown here.
For other mounting options, please visit
www.kessil.com.
Step 2 Turn On the AP700
For more detailed setup information, please visit www.kessil.com.
ver. A2
Cycle Color Up
Cycle Color Down
INTENSITY
Increase Intensity
Decrease Intensity
1.
Do not use water.