Kessler Low Profile Ball Head V2 User manual

Kessler Low Profile Ball Head V2
The Kessler Low Profile Ball Head is an easy to use, ultra-low profile ball head system with a
heavy duty weight capacity. The strong locking ball has 62 degrees of total adjustability.
1. Thread the 3/8”-16 bolt on the bottom of the ball head into a 3/8”-16 hole. Rotate the silver
arms clockwise until tight.
2. The ball head should now be mounted securely. Rotate the black arms clockwise to lock
the ball head level in desired position.

Kwik Release with Low Profile Ball Head (3/8”-16)
1. A great way to mount the Kessler Kwik release plate is with our Low Profile Ball Head.
This allows for quick angle adjustments with minimal effort.
2. The easiest way to mount the Kwik release plate to the Ball Head is to attach it ontothe
3/8” male thread that is installed by default on the Low Profile Ball Head.
3. For a more permanent mounting solution, you can optionally remove the top plate of
the Low Profile Ball Head (1/4”-20 or 3/8”-16) and use the three #8-32 x 1/2” screws toaffix
the Kwik release plate directly to the Ball head with the corresponding mount holes.