Kettler 7399-600 User manual
®
KELER
OUTDOOR FOOSBALL TABLE
MODEL 7399-600
KELER®
-
ATTENTION:
Images in manual
may vary from product
ER
All KETTLER® products are designed in accordance with the latest safety regulations and undergo a constant
process of quality control during manufacturing. The knowledge gained in this process is used to constantly improve
and develop our products. In order to offer our customers the very best in product quality, we reserve the right to
make technical changes at any time. In spite of this, should you have any cause for complaint, please contact
KETTLER®.
Before assembling or using the foosball table, please read the following instructions carefully. They contain
important information for use and maintenance of the equipment as well as for your personal safety. Keep
these instructions in a safe place for maintenance purposes or for ordering spare parts.
•
The foosball table should be used only for its
intended purpose, i.e. for playing with suitable
balls.
•All other uses are prohibited and may be
dangerous. The manufacturer cannot be held
liable for damage or injury caused be improper
use of the table.
•Damaged or worn components may endanger
your safety or shorten the lifespan of the foosball
table. Replace worn or damaged components
immediately and remove the table from use until
this has been done. Use only spare parts
manufactured by KETTLER®.
•The foosball table complies with all safety
regulations. Incorrect repairs, alterations to the
design (removal of original parts, addition of
other components etc.) may endanger the safety
of the user.
•Instruct other persons (in particular children)
using the table in its correct use, and draw their
attention to any potential source of danger,
especially when setting up or dismantling the
table.
•Caution: During assembly, keep all items out of
children’s reach (choking hazard-contains small
parts).
•Regularly check all screws, bolts etc. to ensure
they are in good condition.
•Warning: This is a heavy product. Do not
attempt to move or maneuver without
adequate help and safety measures. May result
in injury. Children should not move table.
•
Do not use the foosball table until it has been
fully and correctly assembled and checked.
•Set the table up on a level surface.
•When not playing or storing the table, always
use the included protective cover.
•Do not use corrosive or abrasive materials to
clean the equipment. Ensure that such
materials are not allowed to pollute the
environment. In most cases a damp cloth is
sufficient.
•
Waste disposal: KETTLER® products are
recyclable. At the end of its useful life, please
dispose of correctly and safely complying with
your local facilities and guidelines.
•Once the table is assembled it may not fit
through your doorways. For this reason you
should assemble the table where you intend to
use the table. Should you wish to move the
table some disassembly may be required.
1
Before Assembly (continued)
Genel Assembly Instructions
Package Contents
0
2
1
f
r Step 1
Leg Assembly
A
B
C
Step 1 (continued)
REPEAT STEP 1 A-G FOR EACH LEG
Pictures Similar
Step 2
Setting the table upright
IMPORTANT: Have two
people complete Step 2.
Turn the table onto its feet to
prepare for the next assembly
step.
Warning: This is a heavy product.
Do not attempt to move or
maneuver without adequate help
and safety measures. May result in
injury.
5
D
Place hexflange nuts onto
carriage bolt ends and
tighten.
E
Screw floor leveler into leg post.
REPEAT STEP 3 A-C FOR EACH ROD AS
SHOWN BELOW
1
8
Use the diagram on Page 6 for additional assistance.
SKIP BALL DROP HOLE
Step 4
Rod Bushing Assembly
Insert the 2 part inner
bushing in the open
cabinet hole (which has
the rod extending
through) as shown. (A, B)
Ensure that it is flush with
the inside of the cabinet wall.
(C)
Install the outer bushing with
pins on the outside of
cabinet, lining it up with pins
from inner bushing. (D)
Ensure that it is flush with
the outside of the cabinet
wall. (E)
1
9
May be necessary to complete before proceeding with Step 4
8 required 8 required
16 required
M4 X 25
Step 4
Rod Bushing Assembly (Continued)
REPEAT STEP 4 A-G FOR EACH ROD
Using 2 of the M4 x 25
screws, fasten the bushing
into place.
1
10
Step 5
Rod Bearing Assembly
REPEAT STEP 5 A-E FOR EACH ROD
On the opposite cabinet
hole, slide bearing over the
end of rod. (A,B)
Insert the end cap into hole.
(C)
Ensure that it is flush with
the cabinet’s wall. (D)
Using two M4x25 screws,
fasten the end cap into
place.
11
8 required 8 required
16 required
M4 x 25
Step 7
Ball Drop Assembly
REPEAT STEP 7 A-E FOR THE BALL DROP
ON THE OTHER SIDE OF THE TABLE
Locate the ball drop
assembly hole on the side of
cabinet wall. It will be
directly in the middle of table
and will have 3 punched pilot
holes surrounding it. (A)
Place ball drop into the hole. (B)
Ensure that the screw holes align
with the pilot holes. (C)
Using three M2.8 x 11.5
screws, fasten the ball
holder to the table. (D,E)
13
3 required
M2.8 x 11.5
1 required
Assembly
Step8
Counter Assembly
REPEAT STEP 9 C-D FOR Color 2
COUNTER.
1
4
FOOSBALL TABLE COVER
The foosball table comes
with a cover included
when purchased. Always
cover your foosball table
when not using. This
protects the table from
the elements and
increases the life of the
product to provide many
years of enjoyment!
The cover is equipped with
a Velcro side opening for
ease of use and a tie down
to ensure that the cover
stays in place.
15
16
This KETTLER® Limited Warranty applies to products sold through the KETTLER® Authorized Dealer Network to the
original retail purchaser and authenticated by proof of purchase from a retailer located in the United States. Any
shipments made under this warranty will be shipped to the United States only. Any shipment outside of the United States
will be at the sole cost of the customer. This KETTLER® Limited Warranty is a manufacturer’s warranty and is not
changed or modified by additional warranties extended by individual retailers at the point of sale. Manufacturer warrants
this product to be free from defects in material at the time of the product’s tender of delivery for a period of 3 years for
residential use. This Limited Warranty is not transferable and does not cover normal wear and tear (including, but not
limited to, damage and wear to tires, power shocks, drive belts and other non-durable parts). The liability of the
manufacturer under this Limited Warranty shall not include any liability for direct, indirect, or consequential damages
resulting from the defect. This Limited Warranty is void if the product is damaged by accident, unreasonable use,
improper service, failure to follow instructions provided, modification from its original state, or other causes determined
not arising out of defects in material.
Log onto www.kettlerusa.com/warranty and register
your KETTLER®Foosball Table Warranty online!
www.facebook.com/kettlerusa
twitter.com/kettler_usa
www.youtube.com/kettlerusa
KETTLER®International Inc.,
1355 London Bridge Road, Virginia Beach, VA 23453 USA
For parts/service: call 866-804-0440 or e-mail parts@kettlerusa.com
Docu 8.01.18
©2018KETTLER®All rights reserved. No part ofthis manual may be
reproduced, stored in a retrieval system, or transmitted in any form, or
by any means, such as electronic, mechanical, photocopying or
otherwise, without the prior written permission of KETTLER®.
Table of contents
Other Kettler Video Gaming Accessories manuals
Popular Video Gaming Accessories manuals by other brands
LumiSource
LumiSource boomchair VPR owner's manual
Konix
Konix MYTHICS PLAY AND CHARGE user manual
EastPoint
EastPoint NHL ATTACKER HOVER HOCKEY TABLE Assembly instructions
Tippmann
Tippmann A-5 RESPONSE owner's manual
Mightymast Leisure
Mightymast Leisure LUNAR Assembly instructions
TruGolf
TruGolf WILD WEST manual
