Keysight ECal Kit User manual

I NST R U CT I O N S
Electronic Calibration (ECal) Kit Storage Box
Keysight Part Number N4693-60042 or ECal Option 150
Purpose
The purpose of this document is to instruct the user in customizing the foam insert in the ECal Kit Storage
Box.
Printing Copies of this Document
• To print extra copies of this document from the Web, download the PDF from the Keysight Web site:
• Go to http:\\www.keysight.com/find/assist
• Enter the document part number (N4693-90014) in the
Search
box.
• Click
Search.
• Click on the hyperlink for the document.
• Click the printer icon located in the tool bar.
Function of the ECal Kit Storage Box
The ECal Kit Storage Box is a container for securing your ECal module and accessories, such as a USB
cable, wrenches and adaptors. Inside the box, these items remain safely placed within ESD-safe foam
cutouts so they are protected from the work environment and are easy to find when an instrument
calibration is needed.
The ECal Kit Storage Box is NOT designed for shipping. Please retain the original shipping container for
shipping the ECal module and accessories back to Keysight for repair and calibration. If the shipping
container is misplaced, contact Keysight for instructions. Assistance with test and measurement needs and
information on finding a local Keysight office are available on the Web at
http:\\www.keysight.com/find/assist
1

Customizing the Foam Insert in the Storage Box
The foam insert in the storage box can be customized to fit four different ECal modules and various
accessories by removing some of the foam pieces. Use the following tables and drawings to determine
which pieces to remove from the foam insert for your ECal module and accessories.
NOTE:
If foam pieces W, X, Y, or Z are removed, each has a small attachment point (indicated by circles in
Figure 1) that must be cut.
If your ECal module has this shape…
…remove these foam pieces
(see Figure 1)
• C (3 locations)
• C (3 locations)
• W (1 location)
• X (2 locations)
• Y (2 locations)
• C (3 locations)
• X (2 locations)
• Z (2 locations)
• C (3 locations)
• X (2 locations)
• Y (2 locations)
• Z (2 locations)
2

Figure 1
Please continue with the instructions on the back of this page.
3

If you have this accessory… …remove these foam pieces (see Figure 2)
Small adaptor A (4 locations)
Large adaptor B (4 locations)
Torque wrench E (2 locations)
Note that E has several pieces that allow for various wrench
sizes.
USB cable F (1 location)
APC-7 Collet Extractor tool G (1 location)
Small wrench H (1 location)
Figure 2
NOTE
: ECal Kit Storage Box labels are provided to help you identify the box contents and to prevent mixing
items from other calibration kits. It is recommended that you affix the label onto the top cover of the box,
just below the Keysight logo.
4

This page is intentionally left blank.
5

This information is subject to change without notice.
© Keysight Technologies
Print Date: January 23, 2015
Supersedes: November 20, 2006
N4693-90014
www.keysight.com
6