Keyspan USA-49WLC User manual

:
Note: This documentation applies to Keyspan's USB 4-Port Serial
Adapter Software for Mac OS 8.6 - 9.x and covers the features and use
of this software on that platform. For Mac OS X information and
instructions, please read the Keyspan USB Serial Software for
Mac OS X User Manual or visit Keyspan's web page
<http://www.keyspan.com>

Note: You can only have one PRINTER port and one MODEM port on
any given computer. In order for the Keyspan adapter to emulate
either of these ports, the MODEM or PRINTER ports must not be 'in
use' or registered by other software or hardware. For example,
PRINTER/MODEM port emulation is not available on a Mac that already
has a MODEM and PRINTER port builtin (any pre-USB Mac). MODEM

port emulation is not available on any Mac that has an internal modem
as internal modem typically emulates the MODEM port (PRINTER port
emulation is typicall available on these Macs). Printer/Modem Port
emulation can turned ON by using the 's
Advanced Setting's screen.
P#1USA49W yyxx
P#1USA49W yyxx
P#1USA49W yyxx
P#2USA49W yyxx
P#2USA49W yyxx
P#2USA49W yyxx
P#3USA49W yyxx P#4USA49W yyxx
Note: If you install more than one Keyspan USB 4-Port Serial Adapters
on your Mac, Ports 1 - 4 on subsequent adapters will have different
names (please contact Keyspan for details).

Note: These instructions apply to installing the Keyspan USB 4-Port
Serial Adapter on Mac OS 8.6 through 9.x. If you are installing this
software on Mac OS X via CLASSIC, please read the Keyspan USB
Serial Software for Mac OS X User Manual or visit Keyspan's
web page <http://www.keyspan.com> before proceeding.

You should only access this option if your serial device requires that
you turn on an advanced option on or if you are sure of what you are
doing. In most cases, you will not need to change any of the adapter's
advanced options.

Please Note: Using the High Power (high speed) requires that your
Keyspan adapter be connected to a built in USB port on your computer
or a self-powered USB Hub.

WARNING: DO NOT enable this check box if you do not need to. Enabling
this check box in software that supports the baud rates higher than
57.6 will cause that software to operate incorrectly.
Note: This option is only available on Macs that do not have a built-in
Modem or Printer (ie "Blue and White" G3s, iMacs, iBooks, etc.). On
Keyspan Adapters that only have ONE serial port, you can only emulate
the Printer port.
Note: Remote Wakeup is enabled on a per-port basis.

Note: This option is DISABLED on the Keyspan USB 4-Port Serial
Adapter and Keyspan USB PDA Adapter