KIBTOY 420PCS User manual

USER
MANUAL
SERIES PROGRAMMED INSTRUCTIONS
FREE EDITING OF MULTIPLE ACTION INSTRUCTIONS COMBINATION
420
pcs
endless fun
ages
8+

Smart Creative
Module
Front View
Front View Back View
Side View
Indicator Light
Power
Rotary360°A Rotary360°B
Charging Port
Indicator Light
Direction Button
Battery Case
Vertical View
Remote
Control USB Charging
Cable User
Manual Building Block Parts x6
Product Summary
Smart Creative Module
Remote Control
Note: Before building blocks, check the smart creative module and the remote control work properly. (Fully charge the smart creative
module before testing.)
Note: Check the packing intact.

Supports mobile phonesand tabletsof
IOS 10.0 and above, supports devices
of iPhone 6 and above, screen size 4.7
and above, and supports devices of
iPad and above.
Support Android 5.0 and above
version of the system's tablet and
mobile phone;Screen size: 4.7 or
more; front-end camera; 5 million or
more pixels；
Go to http://www.kibtoy.com/ in the browser, download the software and
install it.
Note: This user manual contain
important information. Please
keep it properly.
A set of activation codes can be used by one user and can switch login
in three mobile devices.
For the need of scanning recognition, please allow "KIBTOY" to access
your camera.
Note: Internet connecting needed while register the APP, WIFI environ-
ment recommended.
(activation)
QR Code
“ ”
APP Installation
http://www.kibtoy.com
Download the app, and start exploring the new world.
Activation Step
In order to use all functions properly, APP control is recommended.
Visit KIBTOY home page http://www.kibtoy.com to get the latest version.
Android
SUPPORT
iOS
SUPPORT
Scan QR code, Install “KIBTOY”.
For the first time, you need to activate the APP by scanning the follow-
ing QR code.
Please scan the activation code above to register the APP.

Rotate to view the 3D model and assemble it in
steps.
Open APP, go to the home page, select the
model entrance.
Click the Build button and view the 3D graphics.
Steps for 3D Modeling

APP operation instructions
Programming mode
Various action instructions are
combined to edit freely，and
control the corresponding
actions of the robot.
Path pattern
Robots will act on the path
drawn ，and arrive at their
destination accurately.
Gyroscope mode
Gyroscope mode
Provide accurate azimuth、
horizontal position、velocity
and other signals.
Remote control mode
Music control mode
Remote Control、Action、Lighting、
Sound、Various Command Control.
Speech recognition
Universal Speech Recognition
Controls Robots to Conduct
Various Action Instructions.
Remote control mode
App can be used to manipulate
robots for various action instruc-
tions.
Note: If you need to switch the control direction, please open the control mode of the APP and click the Settings
button to switch.

Indicator Light
Indicator Light
ON/OFF
Right
left
Back
Front
Turn on the power switch, and the indicator light will
be on.
NOTE :
Please turn off the power and use it outside. Do not
keep the motor running for a long time, it may cause
damage to the motor. When the battery is exhausted,
please charge in time.
Before using the remote control, please make sure
that the battery is installed correctly. Turn on the
switch and the indicator light will be on. Press any
button, the indicator light will flash to indicate normal
operation.(AAA battery x2)
To pair the remote control, you need to turn off the
smart robot and the remote control at the same time,
then turn on the robot module switch and then turn on
the remote control switch, the pairing will be automati-
cally completed. The indicator of the remote control
will stay on.
NOTE：
If the pairing is not successful for a long time or the pairing fails, please repeat the operation .
Please use a standard USB charger to charge the smart module. When the device is charging
normally, the indicator light on the USB port will turn red to indicate that charging is in progress.
It takes about 60 minutes to complete the charging, and the indicator light will be off after the
charging is completed.
NOTE:
The charging input voltage should not exceed 5V, and the current should not exceed 1A.
NOTE：
Precautions Smart creative module is not removable and must not subject the product to mechani-
cal shock;
Smart creative module contains batteries,away from heat sources and locations above 60℃;
To avoid damage smart creative module do not be charged for a long time ;
The USB charging cable is an electronic component and cannot be used for play;
This product contains small parts and is prohibited for use by children under the age of three to
avoid the risk of choking.
The remote control function keys vary with the product series.
NOTE:
When the “Front and Back”is pressed at the same time ,the indicator light flashes and the direction
control will be switched. The left and right are the same way.
Direction buttun control :Front /back /left /right
On/Off
Remote Control Operation
Link Operation
Charging Operation
Method Of Operation
Indicator Light
Indicator Light
Power Switch
Charging Port

Building Block Parts
Assembly Introduction
Before building blocks, check the smart creative module and the remote control work properly. (Fully charge the
smart creative module before testing.)
Check the building block parts intact. If missing, please contact us. x6
1
2
3After unpacking, it is recommended to sort the blocks first for subsequent assembly. It may take several hours to
assemble the blocks, so please keep the parts properly if you cannot assemble them all at once.
4To complete the assembly please follow the instructions. Also you can open the APP and select 3D model building
guide.
NOTE:
The blocks are difficult to disassemble after assembling, please assemble carefully.The damage caused by disassem-
bly without following the instructions is not covered by the after-sale service.

（SHORT）

（SHORT）
（SHORT）