KICK ASS LITHIUM LiFePO4 L1 User manual

USER MANUAL
VER 1.05
PATENT PENDING © 2022, KickAss Products Pty Ltd. All rights reserved.
LITHIUM
LiFePO4 POWER STATION

OPTIONAL TRAY
Optional 6AWG Inverter Cable (1.5m)
POWER STATION
Why KickAss?
What makes KickAss different is the
fact that we offer the complete
solution: KickAss Lithium Power
Station, Solar Panels, Portable
Fridges, AC Chargers and everything
you need to get your off-grid camping
needs solved in one place.
Designed by the KickAss Team
The KickAss Lithium Power Station
has been designed in-house by the
KickAss Team and has taken over 4
years of hard work and dedication to
complete. We listened to our
customers over many years to make a
feature rich and practical portable
power station.
Congratulations On Purchasing Your
New KickAss LiFePO4 L1 Power Station
IMPORTANT SAFETY INSTRUCTIONS
ŸFor charging 12V KickAss 120Ah LiFePO4 batteries.
ŸThe total current draw from the battery must not exceed 100 Amps. Should the
current draw exceed 100 Amps, the internal BMS will shut down
ŸNever attempt to recharge non-rechargeable batteries.
ŸThe lid of the battery box must remain shut at all times whilst charging a battery or
powering a device from an outlet.
ŸDo not allow any metal objects to fall into the battery box or enter any of the ports.
ŸNever insert anything other than a compatible electrical plug into any of the ports on
the battery box.
ŸEnsure that the battery box is shut and the screws are tight before powering any
devices.
ŸDo not try to jumpstart a vehicle with this battery box.
LITHIUM
LiFePO4 POWER STATION
ON
OFF
A
B
-88.88
CURRENT
26.70
TEMPERATURE
8H 32M
TIME TO EMPTY
VOLTAGE
A
13.00 V
C
PAGE 1 PAGE 2
100%
DISCHARGING

ON
OFF
A
B
-88.88
CURRENT
26.70
TEMPERATURE
8H 32M
TIME TO EMPTY
VOLTAGE
A
13.00 V
C
PAGE 1 PAGE 2
100%
DISCHARGING
LITHIUM
LiFePO4 POWER STATION
OVERVIEW
CIGARETTE
SOCKET
2.4A USB &
QC3.0 USB
CIGARETTE
SOCKET
MAIN
ON/OFF
SWITCH
BATTERY
MONITORING
LCD screen
DCDC CHARGER
CARRY
HANDLE
CARRY
HANDLE
2.4A USB &
QC3.0 USB
BATTERY BOX
LID
BATTERY BOX
BASE
2X IN/OUT
POWER CONNECTORS
ALTERNATOR
INPUT
SOLAR
INPUT
HIGH POWER
CONNECTOR
(100AH MAX)
4X IN/OUT POWER
CONNECTORS
TIE DOWN
STRAP HOLE
FRONT
BACK SIDE
Material
ABS
Temperature Range
-10ºC to +60ºC
Plug and wires go up
and are hidden behind
a channel on the back
of the battery box.

CAUTION
• Do NOT short circuit the battery terminals.
• Do NOT incinerate, crush, puncture, or disassemble.
• Do NOT discard in fire or expose to excessive heat.
• Do NOT overcharge or over-discharge.
• Do NOT immerse in any liquid.
• Store at a minimum capacity of 50%, recharge
every 3 months.
• Only use approved battery charger.
• Not suitable for parallel or series connection.
12V 120AH LiFePO4
LITHIUM BATTERY
KA12120-LION
Battery Type
Rated Voltage
Rated Capacity
Energy
Max Charge Voltage
Charge Temperature
Max Continuous Charge Current
Discharge Temperature
Max Continuous Discharge Current
Battery Low Voltage Cutout
LiFePO4
12.8V
120Ah
1536Wh
14.6V
0~45 °C
40A
-20~60 °C
100A
10V
Step 1: Peel off plastic film to expose the
non-slip surface of silicone pads.
Step 2: Lower your battery into the battery
box base carefully, locating it as centrally
as possible on the non-slip pads.
Step 3: Secure the battery in place by
tightening the velcro strap over the
battery.
Step 4: Install the battery cables onto the
terminal posts of the battery. Ensure red
cable is connected to positive (+)
terminal, both black cables are
connected to the negative (-) terminal
and the black data connector on the lid is
connected to the data connector on the
battery
Note: the pads may be washed to
regain stickiness.
ON
OFF
A
B
GETTING STARTED
LITHIUM
LiFePO4 POWER STATION
KA12120-LION
12V 120AH LiFePO4
LITHIUM BATTERY
CAUTION
• Do NOT short circuit the battery terminals.
• Do NOT incinerate, crush, puncture, or disassemble.
• Do NOT discard in fire or expose to excessive heat.
• Do NOT overcharge or over-discharge.
• Do NOT immerse in any liquid.
• Store at a minimum capacity of 50%, recharge
every 3 months.
• Only use approved battery charger.
• Not suitable for parallel or series connection.
12V 120AH LiFePO4
LITHIUM BATTERY
KA12120-LION
Battery Type
Rated Voltage
Rated Capacity
Energy
Max Charge Voltage
Charge Temperature
Max Continuous Charge Current
Discharge Temperature
Max Continuous Discharge Current
Battery Low Voltage Cutout
LiFePO4
12.8V
120Ah
1536Wh
14.6V
0~45 °C
40A
-20~60 °C
100A
10V

ON
OFF
A
B
LITHIUM
LiFePO4 POWER STATION
Step 5: Tuck cables in under the battery
box lid, lowering the lid carefully onto the
box - ensuring the lid is correctly oriented.
Step 6: Install the 4 provided screws to
fasten the lid to the base, being sure not
to over tighten with the supplied allen key.
ON
OFF
A
B
-88.88
CURRENT
26.70
TEMPERATURE
8H 32M
TIME TO EMPTY
VOLTAGE
A
13.00 V
C
PAGE 1 PAGE 2
100%
DISCHARGING
LITHIUM
LiFePO4 POWER STATION
Step 7 ATTENTION: Ensure Lithium is selected as the battery type. If it is not, select
Lithium as the battery type on the DCDC charger by holding the MODE button for 5
seconds or until the battery light starts flashing. Then select LITHIUM and wait for the
battery light to stop flashing. When this occurs, your selection is saved.
1234
MODE
BATTERY TYPE
WETGEL AGM CALCIUM LITHIUM
BULK ABSORPTION FLOAT PULSE
SOLAR
ALTERNATOR
CHARGING
12V 25A DC 4-STAGE
-88.88
CURRENT
26.70
TEMPERATURE
8H 32M
TIME TO EMPTY
VOLTAGE
A
13.00 V
C
PAGE 1 PAGE 2
100%
DISCHARGING

BATTERY
329mm L x 171mm W x 222mm H
14.3kg
Lithium LiFePO4
12.8V
120Ah
50A
Discharge: -20 - 60°C
Storage: -20 - 45°C
Charge: 0 - 45°C
<3% of capacity declined per month at 25°C
Battery Dimensions
Battery Weight
Battery Chemistry
Battery Nominal Voltage
Battery Capacity
Max Charge Current
Operating Temperatures
Self Discharge
Features
Ÿ120Ah Lithium Iron Phosphate (LiFePO4) battery
Ÿ100A Internal Battery Management System (BMS)
ŸBMS supervised Lithium Battery Protection and alarms
ŸBluetooth compatibility with KA app (Android and iOS)
ŸLCD screen unit connection to BMS
ŸApproximately 2000 Cycles at 1C discharge, and up to 4000 cycles at lower
discharge rates.
ŸLow self-discharge and long shelf life
Note: The total current draw from the battery must not exceed 100 Amps. Exceeding 100A will
trigger the BMS over current protection feature.
BMS Protection Features
ŸBattery over and under voltage protection
ŸBattery over and under temperature
protection
ŸBattery over charge and discharge protection
ŸBattery short circuit protection
Applications
ŸSolar System
ŸTelecommunications
Ÿ4WD Dual Battery Systems
ŸCaravan, Motorhome Systems
ŸEmergency Power System
329mm 171mm
222mm
14.3kg
KA12120-LION
12V 120AH LiFePO4
LITHIUM BATTERY

Step 1:
Confirm install location of tray, drilling any required
holes.
Install the strap under the tray, sliding the strap into
the slots either side.
Ensure strap is oriented correctly so that the hooks
face toward the Power Station when installed.
Securely affix the tray in position using bolts or
screws, whichever is applicable.
Ensure that washers are used when installing the
tray, to avoid damage.
Note: We do not provide the screws or bolts for this
installation.
Step 2: Ensure straps are laying outside
the tray before lowering the battery box
carefully onto the tray. Attach each strap
hook to the corresponding slot in the
Power Station.
Step 3: For ease of tightening, place
thumbs in each strap loop, pushing firmly
downwards. The strap should tighten and
hold the Power Station firmly in place.
To release, depress the buckle and pull
the strap to loosen.
MOUNTING TRAY (OPTIONAL)
TOP BOTTOM
OPTIONAL ACCESSORIES
LITHIUM
LiFePO4 POWER STATION
SKU: KAJBLBASE | V1.8
ON
OFF
A
B
00.88
CURRENT
26.70
TEMP
7H 43M
TIME TO EMPTY
VOLTAGE
A
12.75 V
C
PAGE 1
90%
DISCHARGING
PAGE 2

Inverter Cables (Optional)
KickAss Inverter leads have been designed to allow you to
easily connect a high powered inverter to the battery box.
When it comes to Inverter cables, there is no substitute for
quality and these KickAss Inverter Cables have been
designed to work flawlessly and to provide a high current
flow to your inverter.
Note:
ŸThe internal BMS will not allow more than 100 amps to
be drawn from the battery, do not exceed a 1200W
inverter load.
SWITCHES
The Master Switch
The master switch disconnects everything (except for the large
175 amp Anderson style plug and the LCD screen) from the
battery, including the DCDC Charger. Turning it off is a quick
way to disconnect all devices to ensure your battery is not being
drained.
Note: The DCDC Charger + Solar Regulator cannot charge the
internal battery while the Master Switch is in the OFF position,
neither can an externally connected charger.
LCD SCREEN
The KickAss Lithium Battery Box Monitor has a display and two buttons. The screen is
used to monitor the state and condition of the battery. The display features the following:
ŸBattery State of Charge (SoC).
ŸInstantaneous Current Flow, positive when charging, negative when discharging
ŸBattery pack voltage and individual cell voltages
ŸBattery Temperature
ŸRemaining time to full/empty at the current rate of charge/discharge
ŸTotal Capacity of Battery
ŸNumber of full cycles the battery has completed. A full cycle is defined by 100%
discharge and re-charge of a battery. Depleting a battery to 50% and recharging it
twice will result in 1 cycle.
ŸMutable Low Battery Alarm
ŸBattery Capacity Condition State (Excellent, Good, Fair, Bad)
ŸBattery Protection Alarms
Note: Only turn this switch off when placing the battery in storage and
not attempting to charge.

A
B
000.00
CURRENT
27.30
TEMP
524H-08M
TIME TO EMPTY
VOLTAGE
A
13.46 V
C
90%
STANDBY
PAGE 2PAGE 1
State of
Charge
State of
Charge Ring
Load
State
Instantaneous
Current In/Out
Battery
Voltage
Battery
Temperature
Time to
Full/Empty
Page Number
A
B
PAGE 1 PAGE 2
120AH
EXCELLENT CYCLES
0161
3364mV
CELL 1
3364mV
CELL 2
3366mV
CELL 3
3363mV
CELL 4
Turning the screen on/off
The screen can be turned on/off by clicking Button B. To save
power, the screen will turn off automatically after prolonged
inactivity. To set the duration of the screen "On" time before
turning off, hold Button B for five seconds until the Screen
time menu appears. Navigate through the menu using the
buttons. To confirm selection, wait 5 seconds for the home
screen to return.
Switching between Displays
The display can be switched between Page 1 and Page 2 by
clicking Button A.
Low Battery Alarm & Muting Feature
A low battery alarm will sound when the batteries state of
charge falls below 10%. To mute the alarm, press and hold
button A for 5 second or until the muted symbol displays on
page 1 of the display. The alarm will stay muted for 8hrs or
until the battery is charged sufficiently.
SCREEN TIME
30 SECONDS
1 MINUTE
2 MINUTES
5 MINUTES
1 HOUR
Individual Cell Voltage
Battery
Capacity
Battery
Condition
Cumulative
Completed Cycles
Muted Low
Battery Alarm
PRESS AND HOLD
FOR 5 SECONDS

KickAss LITHIUM APP
The KickAss Lithium Battery has
been designed with the latest
bluetooth technology to remotely
monitor your battery from your
smartphone. The app features the
following:
ŸState of Charge (SoC)
ŸInstantaneous Current Flow,
positive when charging, negative
when discharging
ŸBattery Pack and Cell Voltage.
ŸBattery Temperature
ŸRemaining time to full/empty at
the current rate of
charge/discharge
ŸTotal Capacity of Battery
ŸNumber of full cycles the battery
has completed. A full cycle is
defined by 100% discharge and
re-charge of a battery. Depleting
a battery to 50% and recharging
it twice will result in 1 cycle.
ŸLow Battery Alarm
ŸBattery Capacity Health Indicator
ŸBattery Protection Alarms
Temperature
2740 C
Status
Standby
Current
0.00 A
Voltage
14.25 V
Time To Empty 806H-40M
Time To Full - -
State of Charge
100%
State Of
Charge Ring
State Of Charge
Instantaneous
Current In/out
Load State
Time To Empty
(when Discharging)
Time To Full
(when Charging)
Battery
Voltage
Battery
Temperature
Different Pages
Cell 1
3573 mV
Cell 2
Battery Cells
3556 mV
State of Charge
Excellent
Serial Number
LT12RA3921A3921A3.00001
Rated Capacity
121.00 AH
Cycles
1
Cell 4Cell 3
3538 mV 3575 mV
Battery
Condition
Battery
Serial
Number
Battery
Capacity
Cumulative
Completed
Cycles
Individual
Cell Voltages
System Warnings
Temperature
CF
System
Warning
Page
Temperature
Unit Setting

ID: LT12RA39210065
Connected device
Select your device
Connecting to the App
To get started please download the KA
Outback Proof Gear app from the Google
Play store or the Apple iTunes Store.
If the app is already downloaded on your
device for use with your KickAss Bluetooth
fridge, you must ensure that any updates to
the app are installed prior to connecting.
Once the APP is installed, locate your
battery's serial number on the side of your
battery. On the KA Outback Proof Gear app,
find the device ID that corresponds to the
first 10 digits and the last 4 digits of the
battery's serial number and click connect
device.
Home Screen
System Warnings and Settings
Battery Information
KickAss Bluetooth Devices
Edit Device
Name
KickAss Bluetooth
Devices
Device ID: LT12RA39210065
Connect a new
KickAss device
Your individual device ID can be found
on the outside of your device, directly
below the AC power inlet.
Connect device
Back
Barcode located on side of battery
Rename Device ID
To rename your bluetooth device, connect to the
device and then navigate to the fourth tab on the
bottom toolbar. Click the pencil icon next to the
connected device, edit the name and then click
save.
Note: Editing your devices name, will only edit it
on your device. It will not change the name of the
battery for other people who try to connect to it.
ID: LT12RA39210065
Connected device
Select your device
ID: LT12RA39210065
Connected device
Select your device
ID: LT12RA39210065
Connected device
Select your device
BLE Device Rename
Save Cancel
LT12RA39210065 Rename
Save
Edit

KickAss LITHIUM BMS ALARM MODES
CHARGING OVER VOLTAGE
(Check Manual)
UNDER VOLTAGE
(Please Recharge)
CHARGING HIGH TEMPERATURE
(Check Manual)
View Error
Charging Over Voltage Error
Over Voltage Protection: The
voltage of your battery has exceeded
the normal range. Remove charger
from battery
View Error
Under Voltage Error
View Error
Charging High Temperature Error
View Error
Charging Low Temperature Error
View Error
Discharging High Temperature Error
View Error
Discharging Low Temperature Error
View Error
Charging Overcurrent Error
View Error
Discharging Overcurrent Error
View Error
Short Circuit Protection Error
Under Voltage Protection: The
voltage of your battery is below the
normal range. Connect charger to
battery
Charging High Temperature
Protection: The temperature of your
battery has exceeded the normal
range. Disconnect all loads/chargers
and place your battery in a cooler
location
Charging Low Temperature
Protection: The temperature of your
battery is below the normal range.
Disconnect all loads/chargers and
place your battery in a warmer
location
Discharging High Temperature
Protection: The temperature of your
battery has exceeded the normal
range. Disconnect all loads/chargers
and place your battery in a cooler
location
Discharging Low Temperature
Protection: The temperature of your
battery is below the normal range.
Disconnect all loads/chargers and
place your battery in a warmer
location
Charging Over Current Protection:
The charging current of your battery
has exceeded the normal range.
Disconnect all chargers from the
battery
Discharging Over Current
Protection: The discharging current
of your battery has exceeded the
normal range. Disconnect all load
from the battery
Short Circuit Protection: The
battery is short-circuited. Check all
wiring and connections for short
circuits
CHARGING LOW TEMPERATURE
(Check Manual)
DISCHARGING HIGH TEMPERATURE
(Check Manual)
DISCHARGING LOW TEMPERATURE
(Check Manual)
CHARGING OVERCURRENT
(Check Manual)
DISCHARGING OVERCURRENT
(Check Manual)
Short Circuit Protection
(Check Manual)
ALARM MODE APP SYSTEM WARNING LCD screen
SYSTEM WARNING

CONNECTIONS
2 X CIGARETTE
SOCKET OUTPUTS
2 x Cigarette Socket Outputs
= Maximum 10A output per socket
2 X DUAL USB / QC3.0
OUTPUTS
2 x Dual USB / QC3.0 Outputs
= 2 x 2.4A High Powered USB
(White)
= 2 x Quick Charge QC 3.0 Ultra
High Powered USB Outputs
(5V/3.1A, 9V/2A, 12V/1.5A - Blue)
OUTPUTS
4 x (50A) Anderson Style Plugs
on the side 2 x (50A) Anderson Style Plugs on the back
= Input / Output Capable.
= All Anderson Plugs combined must not exceed 50A total current.
WARNING:
1. Do not plug in multiple chargers as inputs.
2. Do not use an external charger while the DCDC Charger is operating.
3. Exceeding 50A combined current rating will trigger the safety breaker. Safety breaker will
auto-reset in time.
6 X (50A) ANDERSON STYLE PLUGS
Benefits of Quick Charge
When paired with compatible devices, a Quick Charge-enabled charger delivers more power, allowing
the connected device to charge faster. As one of the most widely used of the fast charging technologies,
Quick Charge is already in many of your favorite smartphones. If your smartphone is Quick Charge 3.0-
compatible, you can charge up to 80% in just 35 minutes.
To future-proof your chargers, each new Quick Charge generation is backwards compatible, meaning it
will work with the generations that came before.
INPUTS/OUTPUTS
Note: The total output load of all connections combined must not exceed 100A

50A MAX
COMBINED
+
+ +
+ +
+ +
2X IN/OUT POWER CONNECTOR
4X IN/OUT POWER CONNECTOR
DCDC CHARGER GUIDE
WARNING!
DO NOT SHORT CIRCUIT (UNFUSED)
LiFePO4 POWER STATION
L1
HIGH POWER CONNECTOR
100A MAX
SOLAR LED STATUS
ALTERNATOR LED BATTERY STATUS WITH IGNITION WIRE CONNECTED
ALTERNATOR LED BATTERY STATUS
Alternator LED Status
Alternator LED Status
Status
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
Cut-in voltage reached, charging will
start after 30 second delay
Solar Input Voltage Exceeded
MASTER SWITCH
LITHIUM LIFEPO4 COLOUR LCD DISPLAY
iNTEGRATED WITH
CHARGER
BATTERY BMS
INFORMATION
BUILT-IN CIRCUIT
BREAKERS
multiple power
outlets
Automatic Starter
Battery Isolation
USB QC3 QUICK
CHARGING
MPPT
LITHIUM BATTERY
FAULT ALARMS
Maximum Continuous Output Current: 100A
Peak Discharge Current: 110A for 7 Seconds
Discharge Temperature Range: -20-60°C
Max Charge Voltage: 14.6V
Recommended Continuous Charge Current: 40A
Charging Temperature Range: 0-45°C
SCAN QR CODE TO GET MORE INFO
BATTERY BOX DISPLAY A. MENU
B. ON/OFF
1 X (175A) ANDERSON STYLE PLUG
1 x (175A) Anderson Style Plug
on the left side = High Current Inverter Output
= Connected directly to battery
WARNING:
1. Combined battery box current output must not
exceed 100A.
2. Master switch does not disconnect the battery from
this connector.
3. KickAss Lithium batteries should not be used for
jump starting a vehicle’s battery.
NOTE: THE 6 ANDERSON PLUGS INDICATED CANNOT
EXCEED A TOTAL OF 50 AMPS COMBINED.

ALTERNATOR
MPPT SOLAR
1 X TRIPLE ANDERSON STYLE PLUG
1 X (50A) ANDERSON STYLE PLUG
1 X (50A) Anderson Style Plug
(for Solar Input)
1 X Triple Anderson Style Plug
= 9-32V DC Starter Battery Input (+/-)
= Ignition source connection
= Minimum Solar Input Voltage: 9V DC
= Maximum Solar Input Voltage: 23V DC
= Maximum Solar Input Current: 25A
Unregulated Solar Input - utilises in built DCDC MPPT regulator.
Not suitable for regulated solar input, connect to a standard in/out connector when
using an external or panel-mounted solar controller/regulator.
WARNING:
1. Do not exceed the Maximum Voltage of 23V DC
2. Do not exceed the Maximum Input Current of 25A
INPUTS

CONNECTING TO EXTERNAL CHARGERS
The KickAss Lithium Power Station may be charged in a number of ways:
ŸConnecting alternator power to inbuilt DCDC Charger in a vehicle.
ŸConnecting an unregulated solar panel input to dedicated solar input connector on
the back of the DCDC Charger (fig 1.2).
ŸConnecting a solar panel with lithium compatible regulator/controller to any of the
in/out Anderson style connectors (fig 1.1).
ŸConnecting an external 240V Lithium Compatible charger to any of the in/out
Anderson Style Connectors (fig 1.1).
Warning:
ŸDo not connect an external charger that is not lithium compatible
ŸDo not connect multiple external chargers.
ŸDo not connect an external 240V Mains Powered charger or similar while the
DCDC Charger is operating.
ŸDo not connect an unregulated solar panel directly to the battery via any of the
in/out connectors.
ŸDo not connect a solar panel with regulator/controller to the unregulated solar
connector.
fig 1.2
fig 1.1
KickAss Intelligent 9 Stage
22 Amp Battery Charger
SKU: KACHG1222
KickAss 12V 200W
Solar Panel - Super Thin
Portable Camping Solar Panel
SKU: KASTSP200
KickAss 12V 300W
Solar Panel - Super Thin
Portable Camping Solar Panel
SKU: KASTSP300

ON
OFF
A
B
00.88
CURRENT
26.70
TEMP
7H 43M
TIME TO EMPTY
VOLTAGE
A
12.75V
C
PAGE 1
90%
DISCHARGING
PAGE 2
LITHIUM
LiF ePO 4 POW ER STAT ION
CONNECTING DCDC CHARGER
The KickAss Lithium Power Station includes a built-in DCDC Charger suitable for
charging from a vehicle alternator.
The easiest way to connect the Power Station to your vehicle is by using the KickAss
Plug & Play Wiring Kit (sold separately).
The triple Anderson style connector fitted to the Power Station interfaces with the
KickAss Plug & Play Wiring Kit, providing a simple, quick release vehicle charging
solution. This triple connector and cable provides alternator power to the DCDC on the
Power Station, along with an Ignition Source for charging in vehicles that are fitted with
Smart or Temperature Compensating Alternator.
For more information on installing a Dual Battery Wiring Kit and Ignition Wire, please
visit KickAssproducts.com.au/support
KickAss Premium Plug & Play DCDC Wiring Kit
SKU: KAPRDBWK8MMPP
STARTER
BATTERY
VEHICLE
STARTER
BATTERY

ALTERNATOR INPUT
++
25A DCDC & MPPT
SOLAR CHARGER
50A MAX
COMBINED
+
+ +
+ +
+ +
2X IN/OUT POWER CONNECTOR
4X IN/OUT POWER CONNECTOR
DCDC CHARGER GUIDE
WARNING!
SOLAR INPUT
(UNREGULATED 9-23V DC)
DO NOT SHORT CIRCUIT (UNFUSED)
LiFe PO4 POWER STATION
L1
HIGH POWER CONNECTOR
100A MAX
SOLAR LED STATUS
ALTERNATOR LED BATTERY STATUS WITH IGNITION WIRE CONNECTED
ALTERNATOR LED BATTERY STATUS
Alternator voltage 12V Alternator voltage 24V Alternator LED
Solar LED
Status
Alternator voltage 12V Alternator voltage 24V Alternator LED Status
Status
0-8.9 Volts
9-12.6 Volts
12.7-13.1 Volts
13.2 Volts
12-17.9 Volts
18-25.2 Volts
25.3-26.3 Volts
26.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
0-8.9 Volts
9-11.6 Volts
11.7-12.1 Volts
12.2 Volts
12-17.9 Volts
18-23.2 Volts
23.3-24.3 Volts
24.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
0-8.9 Volts
Unregulated 9-23V DC
OFF
Solid on
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
Cut-in voltage reached, charging will
start after 30 second delay
23V + Solar LED is Off Solar Input Voltage Exceeded
Solar voltage
MASTER SWITCH
CIG SOCKET
10A MAX
CIG SOCKET
10A MAX
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
LITHIUM LIFEPO4 COLOUR LCD screen
iNTEGRATED WITH
CHARGER
BATTERY BMS
INFORMATION
BUILT-IN CIRCUIT
BREAKERS
multiple power
outlets
Automatic Starter
Battery Isolation
USB QC3 QUICK
CHARGING
MPPT
LITHIUM BATTERY
FAULT ALARMS
Maximum Continuous Output Current: 100A
Peak Discharge Current: 110A for 7 Seconds
Discharge Temperature Range: -20-60°C
Max Charge Voltage: 14.6V
Recommended Continuous Charge Current: 40A
Charging Temperature Range: 0-45°C
SCAN QR CODE TO GET MORE INFO
BATTERY BOX DISPLAY A. MENU
B. ON/OFF
ALTERNATOR INPUT
++
25A DCDC & MPPT
SOLAR CHARGER
50A MAX
COMBINED
+
+ +
+ +
+ +
2X IN/OUT POWER CONNECTOR
4X IN/OUT POWER CONNECTOR
DCDC CHARGER GUIDE
WARNING!
SOLAR INPUT
(UNREGULATED 9-23V DC)
DO NOT SHORT CIRCUIT (UNFUSED)
LiFe PO4 POWER STATION
L1
HIGH POWER CONNECTOR
100A MAX
SOLAR LED STATUS
ALTERNATOR LED BATTERY STATUS WITH IGNITION WIRE CONNECTED
ALTERNATOR LED BATTERY STATUS
Alternator voltage 12V Alternator voltage 24V Alternator LED
Solar LED
Status
Alternator voltage 12V Alternator voltage 24V Alternator LED Status
Status
0-8.9 Volts
9-12.6 Volts
12.7-13.1 Volts
13.2 Volts
12-17.9 Volts
18-25.2 Volts
25.3-26.3 Volts
26.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
0-8.9 Volts
9-11.6 Volts
11.7-12.1 Volts
12.2 Volts
12-17.9 Volts
18-23.2 Volts
23.3-24.3 Volts
24.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
0-8.9 Volts
Unregulated 9-23V DC
OFF
Solid on
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
Cut-in voltage reached, charging will
start after 30 second delay
23V + Solar LED is Off Solar Input Voltage Exceeded
Solar voltage
MASTER SWITCH
CIG SOCKET
10A MAX
CIG SOCKET
10A MAX
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
LITHIUM LIFEPO4 COLOUR LCD screen
iNTEGRATED WITH
CHARGER
BATTERY BMS
INFORMATION
BUILT-IN CIRCUIT
BREAKERS
multiple power
outlets
Automatic Starter
Battery Isolation
USB QC3 QUICK
CHARGING
MPPT
LITHIUM BATTERY
FAULT ALARMS
Maximum Continuous Output Current: 100A
Peak Discharge Current: 110A for 7 Seconds
Discharge Temperature Range: -20-60°C
Max Charge Voltage: 14.6V
Recommended Continuous Charge Current: 40A
Charging Temperature Range: 0-45°C
SCAN QR CODE TO GET MORE INFO
BATTERY BOX DISPLAY A. MENU
B. ON/OFF
ALTERNATOR INPUT
++
25A DCDC & MPPT
SOLAR CHARGER
50A MAX
COMBINED
+
+ +
+ +
+ +
2X IN/OUT POWER CONNECTOR
4X IN/OUT POWER CONNECTOR
DCDC CHARGER GUIDE
WARNING!
SOLAR INPUT
(UNREGULATED 9-23V DC)
DO NOT SHORT CIRCUIT (UNFUSED)
LiFe PO4 POWER STATION
L1
HIGH POWER CONNECTOR
100A MAX
SOLAR LED STATUS
ALTERNATOR LED BATTERY STATUS WITH IGNITION WIRE CONNECTED
ALTERNATOR LED BATTERY STATUS
Alternator voltage 12V Alternator voltage 24V Alternator LED
Solar LED
Status
Alternator voltage 12V Alternator voltage 24V Alternator LED Status
Status
0-8.9 Volts
9-12.6 Volts
12.7-13.1 Volts
13.2 Volts
12-17.9 Volts
18-25.2 Volts
25.3-26.3 Volts
26.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
0-8.9 Volts
9-11.6 Volts
11.7-12.1 Volts
12.2 Volts
12-17.9 Volts
18-23.2 Volts
23.3-24.3 Volts
24.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
0-8.9 Volts
Unregulated 9-23V DC
OFF
Solid on
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
Cut-in voltage reached, charging will
start after 30 second delay
23V + Solar LED is Off Solar Input Voltage Exceeded
Solar voltage
MASTER SWITCH
CIG SOCKET
10A MAX
CIG SOCKET
10A MAX
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
LITHIUM LIFEPO4 COLOUR LCD screen
iNTEGRATED WITH
CHARGER
BATTERY BMS
INFORMATION
BUILT-IN CIRCUIT
BREAKERS
multiple power
outlets
Automatic Starter
Battery Isolation
USB QC3 QUICK
CHARGING
MPPT
LITHIUM BATTERY
FAULT ALARMS
Maximum Continuous Output Current: 100A
Peak Discharge Current: 110A for 7 Seconds
Discharge Temperature Range: -20-60°C
Max Charge Voltage: 14.6V
Recommended Continuous Charge Current: 40A
Charging Temperature Range: 0-45°C
SCAN QR CODE TO GET MORE INFO
BATTERY BOX DISPLAY A. MENU
B. ON/OFF
TYPICAL DIAGRAMS
REGULATED SOLAR PANEL
POWER
CHARGING/
FAULT
22A
SMART
CHARGER
CO M P AT I B I L I T Y
LEAD ACID GEL AGM LITHIUM
AC CHARGER
UNREGULATED SOLAR PANEL 23V MAX
VEHICLE
BATTERY
VEHICLE IGNITION
+-
plug-in to any of
these sockets
plug-in to any of
these sockets
ALTERNATOR INPUT
++
25A DCDC & MPPT
SOLAR CHARGER
50A MAX
COMBINED
+
+ +
+ +
+ +
2X IN/OUT POWER CONNECTOR
4X IN/OUT POWER CONNECTOR
DCDC CHARGER GUIDE
WARNING!
SOLAR INPUT
(UNREGULATED 9-23V DC)
DO NOT SHORT CIRCUIT (UNFUSED)
LiFe PO4 POWER STATION
L1
HIGH POWER CONNECTOR
100A MAX
SOLAR LED STATUS
ALTERNATOR LED BATTERY STATUS WITH IGNITION WIRE CONNECTED
ALTERNATOR LED BATTERY STATUS
Alternator voltage 12V Alternator voltage 24V Alternator LED
Solar LED
Status
Alternator voltage 12V Alternator voltage 24V Alternator LED Status
Status
0-8.9 Volts
9-12.6 Volts
12.7-13.1 Volts
13.2 Volts
12-17.9 Volts
18-25.2 Volts
25.3-26.3 Volts
26.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
0-8.9 Volts
9-11.6 Volts
11.7-12.1 Volts
12.2 Volts
12-17.9 Volts
18-23.2 Volts
23.3-24.3 Volts
24.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
0-8.9 Volts
Unregulated 9-23V DC
OFF
Solid on
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
Cut-in voltage reached, charging will
start after 30 second delay
23V + Solar LED is Off Solar Input Voltage Exceeded
Solar voltage
MASTER SWITCH
CIG SOCKET
10A MAX
CIG SOCKET
10A MAX
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
LITHIUM LIFEPO4 COLOUR LCD screen
iNTEGRATED WITH
CHARGER
BATTERY BMS
INFORMATION
BUILT-IN CIRCUIT
BREAKERS
multiple power
outlets
Automatic Starter
Battery Isolation
USB QC3 QUICK
CHARGING
MPPT
LITHIUM BATTERY
FAULT ALARMS
Maximum Continuous Output Current: 100A
Peak Discharge Current: 110A for 7 Seconds
Discharge Temperature Range: -20-60°C
Max Charge Voltage: 14.6V
Recommended Continuous Charge Current: 40A
Charging Temperature Range: 0-45°C
SCAN QR CODE TO GET MORE INFO
BATTERY BOX DISPLAY A. MENU
B. ON/OFF
ALTERNATOR INPUT
++
25A DCDC & MPPT
SOLAR CHARGER
50A MAX
COMBINED
+
+ +
+ +
+ +
2X IN/OUT POWER CONNECTOR
4X IN/OUT POWER CONNECTOR
DCDC CHARGER GUIDE
WARNING!
SOLAR INPUT
(UNREGULATED 9-23V DC)
DO NOT SHORT CIRCUIT (UNFUSED)
LiFe PO4 POWER STATION
L1
HIGH POWER CONNECTOR
100A MAX
SOLAR LED STATUS
ALTERNATOR LED BATTERY STATUS WITH IGNITION WIRE CONNECTED
ALTERNATOR LED BATTERY STATUS
Alternator voltage 12V Alternator voltage 24V Alternator LED
Solar LED
Status
Alternator voltage 12V Alternator voltage 24V Alternator LED Status
Status
0-8.9 Volts
9-12.6 Volts
12.7-13.1 Volts
13.2 Volts
12-17.9 Volts
18-25.2 Volts
25.3-26.3 Volts
26.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
0-8.9 Volts
9-11.6 Volts
11.7-12.1 Volts
12.2 Volts
12-17.9 Volts
18-23.2 Volts
23.3-24.3 Volts
24.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
0-8.9 Volts
Unregulated 9-23V DC
OFF
Solid on
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
Cut-in voltage reached, charging will
start after 30 second delay
23V + Solar LED is Off Solar Input Voltage Exceeded
Solar voltage
MASTER SWITCH
CIG SOCKET
10A MAX
CIG SOCKET
10A MAX
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
2 X USB
QC3.0 & 2.4AMP
(5A OUT MAX)
LITHIUM LIFEPO4 COLOUR LCD screen
iNTEGRATED WITH
CHARGER
BATTERY BMS
INFORMATION
BUILT-IN CIRCUIT
BREAKERS
multiple power
outlets
Automatic Starter
Battery Isolation
USB QC3 QUICK
CHARGING
MPPT
LITHIUM BATTERY
FAULT ALARMS
Maximum Continuous Output Current: 100A
Peak Discharge Current: 110A for 7 Seconds
Discharge Temperature Range: -20-60°C
Max Charge Voltage: 14.6V
Recommended Continuous Charge Current: 40A
Charging Temperature Range: 0-45°C
SCAN QR CODE TO GET MORE INFO
BATTERY BOX DISPLAY A. MENU
B. ON/OFF
INVERTER CONNECTION

DCDC CHARGER GUIDE
SOLAR LED STATUS
ALTERNATOR LED BATTERY STATUS WITH IGNITION WIRE CONNECTED
ALTERNATOR LED BATTERY STATUS
Alternator voltage 12V Alternator voltage 24V Alternator LED
Solar LED
Status
Alternator voltage 12V Alternator voltage 24V Alternator LED Status
Status
0-8.9 Volts
9-12.6 Volts
12.7-13.1 Volts
13.2 Volts
12-17.9 Volts
18-25.2 Volts
25.3-26.3 Volts
26.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
Cut-in voltage reached, charging will
start after 30 second delay
0-8.9 Volts
9-11.6 Volts
11.7-12.1 Volts
12.2 Volts
12-17.9 Volts
18-23.2 Volts
23.3-24.3 Volts
24.4 Volts
OFF
Flash 1 sec on 5 sec off
Flash 1 sec on 1 sec off
Solid on
Under operating voltage
Under cut-out voltage
Under cut-in voltage
0-8.9 Volts
Unregulated 9-23V DC
OFF
Solid on
Under cut-in voltage
Cut-in voltage reached, charging will begin after 10 sec
delay (please note alternator has priority over solar)
Cut-in voltage reached, charging will
start after 30 second delay
23V + Solar LED is Off
Stage 1 & 3 LED Fault Code Indication Solar Input Voltage Exceeded
Solar voltage
SOLAR
ALTERNATOR
CHARGING
Charging light will flash when unit is charging.
Solid on: cut-in voltage reached.
(see table below for other indications)
Solid on: cut-in voltage reached.
(see table below for other indications)
UNDERSTANDING SOLAR, ALTERNATOR
& CHARGING LIGHTS
• Alternator has priority over solar therefore, if both solar and alternator are connected, only alternator LED is
solid and alternator is charging.
• 30 sec delay between cut-in voltage being reached and charging beginning & a 60 second delay before
disconnecting when under cut-out voltage.
NOTE

The KickAss 25A DCDC charger is capable of charging other Battery Chemistries. The
charger must be initially set to Lithium and will remain as such once selected. In an
emergency situation another battery type could be used in the battery box, however
make sure the correct battery type is selected
To set the battery type, press and hold the mode button for 5 seconds or until the
battery light starts flashing. Then select from either GEL, AGM, WET, CALCIUM or
LITHIUM and wait for the battery light to stop flashing. When this occurs, your selection
is saved.
BATTERY TYPE
CHARGING STAGE PROFILE
NOTE: When in float stage, the battery is fully charged. At float stage, when battery voltage drops
to 12.7V, the charger will restart charging from BULK stage.
BULK
ABSORPTION
FLOAT
PULSE
13.7V at 100% Current Max
STAGE DESCRIPTION
1234
MODE
BATTERY TYPE
WETGEL AGM CALCIUM LITHIUM
BULK ABSORPTION FLOAT PULSE
SOLAR
ALTERNATOR
CHARGING
12V 25A DC 4-STAGE
Begins after a continuous float stage of 10 days and pulses power
through the battery using the same current and voltage as the
absorption stage to maintain charge and desulphate. During this time, if
the voltage of the auxiliary battery drops below 12.6V, the charger will
restart the charge cycle at Bulk. Once the pulse is completed, the
charger reverts to float stage.
LITHIUM
100%
Current
Until
14.4V
Constant
14.4V
Until 3.8A
AGM 100%
Current
Until 14.4V
WET 100%
Current
Until 14.7V
CALCIUM
100%
Current
Until 15.4V
GEL 100%
Current
Until 14.1V
Constant
14.1V Until
3.8A
Constant
14.4V Until
3.8A
Constant
14.7V Until
3.8A
Constant
15.4V Until
3.8A