Kidde P4010ACSCO-WF User manual

Leading authorities recommend that both ionization and photoelectric
smoke alarms be installed to help ensure optimal detection of the
various types of fires that can occur within the home. Ionization
sensing alarms may detect invisible fire particles (associated with fast
flaming fires) sooner than photoelectric alarms. Photoelectric sensing
alarms may detect visible fire particles (associated with slow smoldering
fires) sooner than ionization alarms.
Features & Benets
Ionization
Technology
Photoelectric
Technology
Description
Hardwired
with 10 Year*
Battery Backup
Smoke + Carbon Monoxide Alarm
with smart features
Power Outage Backup:
Powered by 120V AC with a sealed,long-life lithium battery backup that lasts
for 10 years.**
Double the Detection:
Alerts you to both smoke and carbon monoxide with one device.
Remote Notifications and Status:
The Kidde app allows you to receive mobile notifications,including detection
of smoke or CO, end of unit life,lost internet connection, and easily check the
status of your alarm from anywhere, anytime.
Smart Hush®and Test:
Use the Kiddeapp to easily Smart Hush false alarmsor test the alarm from your
mobile phone.This feature is only available on the Wi-Fi alarm. Mobile app and
alarm must be connected to the same Wi-Fi network.
Simple Installation and Setup:
Scan QR codeon theQuick Start Guide to access easy-to-followin-app
instructions.
Smart Device Connectivity:
Compatible with Google Assistant, Amazon Alexa, Android, and iPhone.*
Voice Alert:
Announces “Fire!” when smoke or fire hazard is present, “Warning! Carbon
Monoxide!” when CO is detected,“Replace Alarm” for low battery, and
“Replace alarm, press button to temporarily silence” at end of unit life. 
Model P4010ACSCO-WF
The Kidde Smoke + Carbon Monoxide Alarmwithsmart features gives you the
capabilities you need to manage your home safety systems with confidence. Wi-Fi
connectivity and integration with the Kidde appplacereal-time information on
potential issues and alarm status at your fingertips. The app provides a smart,
simple way to keep you in control and enhance protection for your home – even
when you’re not there.The alarm is alsodesigned to work together with existing
Kidde hardwire interconnected alarms. When an alarm in any room goes off – even
if it’s not your alarm with smart features – all alarms will sound and send a mobile
notification.It’s a new level of control – and it’s all from a trusted leader in fire
safety for more than 100 years.
Glowing LED Status Ring allows easy identification of current state of alarm.
2-in-1 Wi-Fi Alarm with App
*AMAZON and ALEXA are trademarks of Amazon.com, Inc. or its affiliates.
Google is a trademark of Google, LLC.
**10-year limited warranty on alarm. Not a battery performance claim.
Green:
Unit is Working
Amber:
Error
Red:
Danger Detected
Wi-Fienabled:
Receive notications 24/7 using the Kidde app
2-in-1 Smoke & Carbon Monoxide Alarm:
Provides alerts for both smoke & CO gas
Simple Setup:
Easily add alarms by scanning the QR code on the product 
Industry experts recommend specific locations for smoke alarms, such as every
level and sleeping area of the dwelling. Industry experts also recommend a CO
alarm be installed on each level of the home—ideally on any level with fuel
burning appliances and outside of sleeping areas. See user guide for more location
information and complete instructions.
⚠ WARNING: Mobile alert services are ancillary to the product and for
informational purposes only. They are not intended or suitable for life safety or
critical purposes nor do these services take the place of third-party life safety
monitoring services. This product’s smartphone and tablet notifications require
a stable Wi-Fi connection, and are only as reliable as your home Wi-Fi network.

Architectural and Engineering Specications
Ordering Information (Not for sale by individual unit)
Distributed by:
1016 Corporate Park Drive, Mebane, NC 27302
1-800-880-6788
www.Kidde.com
Model P4010ACSCO-WF
Hardwired
with 10 Year*
Battery Backup
A Carrier Company
©2021 Carrier. All Rights Reserved.
Smoke + Carbon Monoxide Alarm with smart features
Installation of Smoke Alarm
The smoke and carbon monoxide alarm model shall be P4010ACSCO-WF or approved equal
and is powered by a 120VAC, 60Hz source along with a lithium battery backup. The lithium
battery shall be sealed in the unit to prevent removal and/or tampering. The unit shall
incorporate a photoelectric smoke sensor and an electrochemical carbon monoxide sensor.
The smoke alarm can be installed on any standard single gang electrical box, up to a 4”
octagon junction box, following the UL/Manufacturer’s approved placement guidelines. The
electrical connection (to the alarm) shall be made with a plug-in connector. The alarm shall
incorporate an activation switch that can be engaged with a standard screwdriver to power
on the alarm at startup, and deactivate the alarm at end of alarm life.
The P4010ACSCO-WF shall include a test button that will simulate fire and carbon monoxide
conditions and cause the unit to go into alarm. This sequence tests the unit’s electronics
to ensure proper operation. A maximum of 24 Kidde devices can be interconnected in a
multiple station arrangement. The interconnect system must not exceed the NFPA (National
Fire Protection Association) limit of 18 initiating devices, of which 12 can be smoke alarms.
The unit shall have audible methods for warning of smoke or fire danger: a piezoelectric
horn, rated at 85 decibels at 10 feet, and a voice warning. In a smoke incident, the horn will
sound in the repetitive manner – three long beeps, a 1.5 second pause, three long beeps,
repeating. In between, the unit will announce a voice warning, “Fire!” For a CO incident, the
horn will sound in the repetitive manner - 4 quick beeps, voice message “Warning! Carbon
Monoxide”, 4 quick beeps. The red LED ring will flash in conjunction with the alarm sound.
The unit shall incorporate hardwired alarm interconnect capability, whereas when one
interconnected unit sounds an alarm, all other compatible hardwired units will alarm.
The unit shall also include Wi-Fi capabilities, allowing transmission of alarm and status
notifications to a mobile device equipped with the Kidde app. A home Wi-Fi router and
internet are required for Wi-Fi usage. Wi-Fi features only function with AC power applied to
the unit, and when the unit and mobile device are connected to the same Wi-Fi network.
The alarm shall include an End of Unit Life alert, where ten years after initial power up the
unit shall chirp two times every 30 seconds to indicate the alarm needs to be replaced. A
voice warning will provide a “Replace alarm, press button to temporarily silence” message.
This alert can be temporarily silenced in 24 hour increments for seven days.
The unit shall at a minimum meet the requirements of UL217, UL 2034, NFPA 72, The
State of California Fire Marshal, NFPA101 (One and two family dwellings), Federal Housing
Authority (FHA), Housing and Urban Development (HUD). The alarm shall be UL Listed and
shall include a 10-year manufacturer’s limited warranty.
CO alarm response times: 70ppm: within 60-240 min, 150ppm: within 10-50 min, 400ppm:
within 4-15 min
5.59"
5.10"
1.91"
0.45"
P DS - KL- P4 010AC SCO - WF -1021
FUSE OR CIRCUIT BREAKER
BLACK
WHITE
RED
L
N
First
Alarm
Additional
Alarms
⚠ WARNING: This product is intended for use in indoor residential locations. It is not
designed to measure compliance with Occupational Safety and Health Administration
(OSHA) commercial or industrial standards. This device is designed to protect individuals
from acute effects of Carbon Monoxide exposure. It will not fully safeguard individuals
with specific medical conditions. If in doubt, consult a medical practitioner. Individuals with
medical problems may consider using warning devices which provide audible and visual
signals for carbon monoxide concentrations under 30 ppm.
UPC Ordering No: I 2 of 5 Packaging Master Pack Qty Dimensions (w” x d” x h”) Weight
047871310425 21031042 10047871310422 Box 29.06 x 7.88 x 8.06 4 lbs
Technical Specications
Power Source: 120V AC 60Hz, 53 mA max
Sealed Lithium Battery Backup
Audio Alarm: 85 dB at 10 ft.
Temp Range: 40 to 100°F / 4.4 to 37.8°C
Humidity Range: 10 to 95% relative humidity
(RH), non-condensing
Smoke / CO Sensor: Photoelectric, Electrochemical
Warranty:** 10 year limited
Model: P4010ACSCO-WF
Wi-Fi: 802.11b/g/n (2.4GHz) Wi-Fi