Kinfine HOMEPOP K4004.24 User manual

>>assembly instructions
Style Number : K4004.24

2
Congratulations on your latest HomePop purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck --though we’re confident you won’t need it.
1. Check for damaged or missing parts. Customers can email service@kinfine.com or call 1-888-626-0888 to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
before you begin

..............................................
table of contents
introduction
hardware
parts list
assembly
2
4
5
6-9
QUESTIONS? Just email service@kinfine.com or call 1-888-626-0888 parts and service. For fast service, have the style number and article number ready when calling. 3

4
............................................................................
hardware
(B) x 16
Φ 6mm x 12mm
round hex screw
(E) x 1
4mm Ball end
Hex wrench
(D) x 4
Φ 13mm flat washer
(C) x 4
Φ 6mm lock washer
(A) x 4
1/4" x 35mm
round hex screw

............................................................................
5
ITEM DESCRIPTION QUANTITY
1
2
3
4
chair back
seat cushion
bottom
leg
1
1
1
4
1
2
3
4
4
4
4

............................................................................
step 1.
1 2
6
Please do not assemble with power tools
(B) x 12
Φ 6mm x 12mm
round hex screw
(E) x 1
4mm Ball end
Hex wrench
4
4
4
4
2
Do not tighten these 12 bolts
until the next step.
B
E

............................................................................
step 2.
1 2
7
Please do not assemble with power tools
(E) x 1
4mm Ball end
Hex wrench
3
4
4
4
4
(A) x 4
1/4" x 35mm
round hex screw
A
E
Now you may tighten all 16 bolts.

............................................................................
step 3.
1 2
8
Please do not assemble with power tools
1
(B) x 4
Φ 6mm x 12mm
round hex screw
(E) x 1
4mm Ball end
Hex wrench
(D) x 4
Φ 13mm flat washer
(C) x 4
Φ 6mm lock washer
B
C
D
E
Now you may tighten all 4 bolts.

............................................................................
step 4.
9
Level the furniture, use leveling feet if needed.
A friendly reminder from us:
Please keep the Allen wrench.
After a period of time, there may be a chance the
KD furniture may become loose, please use an
Allen wrench to tighten the loose bolts.
Put the chair right and check whether the chair has been well assembled.
If it is not assembled, loosen the screw and tighten it on the ground.