Kinfine Homepop K7693 User manual

>>assembly instructions
Style Number : K7693

2
Congratulations on your latest HomePop purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck --though we’re confident you won’t need it.
1. Check for damaged or missing parts. Customers can email service@kinfine.com or call 1-888-626-0888 to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
before you begin

..............................................
table of contents
introduction
hardware
parts list
assembly
2
4
5
6 - 10
QUESTIONS? Just email service@kinfine.com or call 1-888-626-0888 parts and service. For fast service, have the style number and article number ready when calling. 3

............................................................................
hardware
4
(A) x 4
5/16" x 90mm
round hex screw
(B) x 4
5/16" x 55mm
round hex screw
(C) x 2
5/16" x 50mm
round hex screw
(F) x 1
5mm Ball end
Hex wrench
(E) x 10
Φ 22mm flat washer
(D) x 10
Φ 8mm lock washer

............................................................................
ITEM DESCRIPTION QUANTITY
1
2
3
chair back
seat cushion
leg
1
1
2
5
1
2
3
3

............................................................................
step 1.
1 2
6
Please do not assemble with power tools
(D) x 4
Φ 8mm lock washer
(E) x 4
Φ 22mm flat washer
(F) x 1
5mm Ball end
Hex wrench
(B) x 4
5/16" x 55mm
round hex screw
F
BDE
Open the velcro.
2
3
3

............................................................................
step 2.
7
1 2
Please do not assemble with power tools
Do not tighten these two bolts
until the next step.
1
C
F
D
E
(C) x 2
5/16" x 50mm
round hex screw
(F) x 1
5mm Ball end
Hex wrench
(D) x 2
Φ 8mm lock washer
(E) x 2
Φ 22mm flat washer

until all screws are lined up with the frame. Please do
............................................................................
step 3.
8
Please do not assemble with power tools
Now you may tighten all 6 bolts.
(D) x 4
Φ 8mm lock washer
(E) x 4
Φ 22mm flat washer
(F) x 1
5mm Ball end
Hex wrench
(A) x 4
5/16" x 90mm
round hex screw
A
F
D
E
1

until all screws are lined up with the frame. Please do
............................................................................
step 4.
9
1
Close the velcro.

............................................................................
step 5.
10
A friendly reminder from us:
Please keep the Allen wrench.
After a period of time, there may be a chance the
KD furniture may become loose, please use an
Allen wrench to tighten the loose bolts.
Level the furniture, use leveling feet if needed.