KING CRAFT 8166-11 User manual

Owner’s Manual
2000 WATT GENERATOR
Item # 8166-11
&4#/3#12'-,1-0,##"1#04'!#
.*#1#!**2-**$0##

Please read and save these instructions.
DANGER
Carbon Monoxide
Carbon Monoxide
Using a generator indoors WILL KILL YOU IN MINUTES.
Generator exhaust contains high levels of carbon monoxide (CO), a poisonous
gas you cannot see or smell. If you can smell the generator exhaust, you are
breathing CO. But even If you cannot smell the exhaust, you could be breathing
CO.
other partly
enclosed areas. Deadly levels of carbon monoxide can build up in these areas.
Using a fan or opening windows and doors does NOT supply enough fresh air.
doors, and
vents. These openings can pull in generator exhaust.
Even when you use a generator correctly, CO may leak into the home. ALWAYS
use a battery-powered or battery-backup CO alarm in the home.
If you start to feel sick, dizzy, or weak after the generator has been running,
move to fresh air RIGHT AWAY. See a doctor. You could have carbon
monoxide poisoning.

2000 WATT GENERATOR
1
CONTENTS
SAFETY PRECAUTIONS .......................................................................2
CONTROL FUNCTION .......................................................................3
PRE-OPERATION CHECKS ...................................................................5
OPERATION ...........................................................................................6
OIL SENSER ..........................................................................................9
PERIODIC MAINTENANCE ...................................................................10
TROUBLE SHOOTING ..........................................................................12
STORAGE ..............................................................................................14
COMPLIANCE ........................................................................................14
SPECIFICATIONS ..................................................................................15
SYMBO .....................................................................................................16
WARRANTY ..............................................................................................17
PARTS LISTING ......................................................................................19
OWNER’S MANUAL
2
PLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY
BEFORE OPERATING.
1. SAFETY PRECAUTIONS
1) EXHAUST FUMES ARE POISONOUS
- Never operate the machine in a closed area or it may cause
unconsciousness and death within a short time.Operate the engine in a
well ventilated area.
2) FUEL IS HIGHLY FLAMMABLE AND POISONOUS
- Always turn off the engine when refueling.
Never refuel while smoking or in the vicinity of an open flame.
Take care not to spill any fuel on the engine or muffler when refueling.
- If you sallow any fuel,inhale fuel vapor,or allow any to get in your eyes,
see your doctor immediately. If an fuel spills on your skin or clothing,
immediately wash with soap and water and change your clothes.
- When operating or transporting the machine,be sure it is kept upright.If it
tilts,fuel may leak from the carburetor or fuel tank.
3) ENGINE AND MUFFLER MAY BE HOT
- Put the machine in a place where pedestrians or children are not likely to
touch the machine.
- Avoid placing any flammable materials near the exhaust outlet during
operation.
- Keep the machine away at least 1 m(3 ft) from buildings or other equipment,
or the engine may overheat.
- Avoid operating the engine with a dust cover.
WARING:

2000 WATT GENERATOR
3
NOTE:
4) ELECTRIC SHOCK PREVENTION
- Never operate the engine in rain or snow.
- Never touch the machine with wet hands or electrical shock will occur.
- Be sure to ground (earth) the generator.
- Use ground (earth) lead of sufficient current
capacity. Ground (earth) lead Diameter :
0.12mm(0.005 in)
- Some types of generators have no ground bolts,
so do not operate the machine in rain or snow!
While the machine is operating, don’t touch it with wet hands!
5) CONNECTION NOTES
- Avoid connecting the generator to commercial power outlet.
- Avoid connecting the generator in parallel with any other generator.
6) BATTERY
- No smoking while handing the battery.
- The battery emits flammable hydrogen gas,which can explode if exposed
to electric arcing or open flame.
- Keep the area well-ventilated and keep open flames/sparks away when
handing the battery.
2. CONTROL FUNCTION
1) ENGINE SWITCH
The engine switch controls the ignition system.
OWNER’S MANUAL
4
“ON” ( “ENGINE SWITCH” on “RUN” position)
Ignition circuit is switched on.
The engine can be started.
“OFF”(”ENGINE SWITCH” on “STOP” position)
Ignition circuit is switched off.
The engine will not run.
2) AC AND DC PROTECTOR
The AC or DC breaker turns off automatically when the load exceeds the
generator rated output.
CAUTION:
Reduce the load to within specified
generator rated output if the protector
turn off !
3) COMPONENTS
ENGINE SWITCH
AC PROTECTOR
1. Fuel tank
2. Fuel tank cap
3. AC socket
4. DC socket
5. Ground terminal
6. AC proctector
7. DC proctector
8. Oil filter cap
9. Oil drain plug
10. Engine switch
11. Starter
12. Air filter cover
13. Muffler
14. Spark plug
15. Choke lever

2000 WATT GENERATOR
5
3. PRE-OPERATION CHECKS
NOTE:
Pre-OPERATION checks should be made each time the generator is used.
1) CHECK ENGINE FUEL
- Check fuel level with the tank cap removed.
- If fuel level is low,refill with unleaded
automotive gasoline.
- Be sure to use the fuel filter on the fuel filter
neck.
- Recommended fuel: unleaded gasoline
WARNING:
- DO NOT refill tank while engine is running or hot.
- Close fuel cock before refueling with fuel.
- Be careful not to admit dust ,dirt,water or other foreign objects info fuel.
- Wipe off spilt fuel thoroughly before starting engine.
- Keep open flames away.
2) CHECK ENGINE OIL
- Before checking or refilling oil,be sure the
generator is put on a stable and level
surface with engine stopped.
- Fuel level is below the lower level line,refill
with suitable oil to upper level line. Do not
screw in the oil filler cap when checking
oil level.
OWNER’S MANUAL
6
- Recommended engine oil: SAE 30
10W-30
3) GROUND ( Earth )
Makee sure to ground (earth) the generator.
4. OPERATION
NOTE:
The generator has been shipped without
engine oil. Fill with oil or it will not start.
WARNING:
Before starting the machine, you must check
the oil level, or the engine can be damaged !
1) STARTING THE ENGINE
NOTE:
- Before starting the engine, do not connect the electric apparatus to the
generator.
1. Turn the fuel cock to “ ON ”.
2. Turn the engine switch to “ ON ”.
3. Turn the choke level to the “ CLOSE ” position. Not necessary if the
engine is warm.
4. Pull the starter handle slowly until resistance is felt. This is the
compression point. Return the handle to its original position and pull
swiftly. Do not fully pull out the rope. After starting allow the starter
handle ro return to its original position while still holding the handle.
0oC25
oC
32oF80
oF
C SAE 10W B SAE #20 A SAE #30
or 10W-30 or 10W-30 or 10W-10
or 10W 40 or 10W-40 or 10W-40
OIL INLET

2000 WATT GENERATOR
7
5. Warm up the engine.
6. Turn the choke level back to the operating position.
7. Warm up the engine without a load for a few minutes.
2) USING ELECTRIC POWER
1. AC PROTECTOR
(a) Check the pilot lamp for proper voltage.
(b) Turn off the switch of the electrical appliances before connecting to the
generator.
(c) Insert the plugs of the electrical appliances into the receptacle.
CAUTION:
- Be sure the electric apparatus is turned off before plugging in.
- Be sure the total load is within generator rated output.
- Be sure the socket load current is within socket rated current.
NOTE:
When the circuit breaker no-fuse breaker turns off during operation，
the generator is overloaded
2. BATTERY CHARGING SOCKET (OPTION)
CAUTION:
(a) This socker may be used for charging 12V/8.3A batteries only.
(b) When charging，connect the charging cables to the battery terminals
and then to the DC battery charging socket of the generator..
(c) The leads must be connected making sure of the（+）and（-）polarity
OWNER’S MANUAL
8
3）STOPPING THE ENGINE
1. Turn off the power switch of the
electric apparatus or unplug the
cord from receptacle of the generator.
2. Turn the engine switch to “STOP”.
3. Turn the fuel cock lever to “OFF”.

2000 WATT GENERATOR
9
5. OIL SENSOR
- The oil sensor detects the fall in oil in the crankcase and automatically
stops the engine when the oil level falls down below the safety limit.
- When the engine stops antomatically, check the oil level.
- If the engine can not start by usual starting procedures, check the oil level.
2000 WATT GENERATOR
6. PERIODIC MAINTENANCE
1) MAINTENANCE CHART
Regular maintenance is most important for the best performance and safe
operation.
10
First
5 Hours
REGULAR SERVICE
PERIOD
ITEM
Engine Oil Check Level
Change Oil
Clean
Replace
Check(w/wout)
Check-adjust
Check-adjust
Check-adjust
Replace After every 300 Hrs.
Clean
Clean
Clean
Clean
Change
Spark Arrester
Spark Plug
Finger Guard
Sediment Cup
Area Around Muffler
And Controls
Change Gear Reduction
Oil (If equipped)
Valve Clearqance
Idle Speed
Fuel Tank & Filter
)XHOWXEHVKRXOGEHFKHFNRUUHSODFHHYHU\\HDUV
&RPEXVWLRQFKDPEHUVKRXOGEHFOHDQHGE\\RXUVHUYLFLQJGHDOHUHYHU\+UV
Air Filter
Pre-cleaner
Every
8 Hours
or Each use
Every
+RXUV
or Annually
Every
50 Hours
or Annually
Every
100 Hours
Annually

OWNER’S MANUAL
11
2) ENGINE OIL REPLACEMENT
3) AIR FILTER
1. Place the machine on a level surface
and warm up the engine for several
minutes. Then stop the engine.
2. Remove the oil filler cap.
3. Place an oil pan under the engine.
Remove the oil drain plug so that the
oil can be completely drained.
4. Check the oil drain plug, gasket, oil filler
cap and O-ring. If damaged replace.
5. Add engine oil to the upper level.
6. Reinstall the oil drain plug.
Maintaining an air cleaner in proper condition
is very important.
Dirt induced through improperly installed,
improperly serviced or inadequate elements
damages and wears out engines.
Keep the element always clean.
1. Take out the air cleaner, clean it well in
kerosenee and dry it.
BE SURE NO FOREIGN MATERIAL
ENTERS THE CRANKCASE.
CAUTION:
0oC25
oC
32oF80
oF
C SAE 10W B SAE #20 A SAE #30
or 10W-30 or 10W-30 or 10W-10
or 10W 40 or 10W-40 or 10W-40
2000 WATT GENERATOR
12
2. After wetting the element by clean engine oil , squeeze it tight by hand.
3. Lastly , put the element in the case and install it securely.
The engine should never run without the element; excessive piston and/or
cylinder may wear.
4) MUFFLER
The engine and muffler will be very hot after the engine has been run.
Avoid toughing the engine and muffler while they are still hot with any part
of your body or clothing during inspection or repair.
1. Remove the muffler from the engine.
2. Clean the carbon deposits out of the
muffler using a wire brush.
3. Check the muffler , Replace it if damaged.
4. Install the muffler to the engine.
7. TROUBLE SHOOTING
1) Engine fails to start
1. Fuel system
No fuel supplied to combustion chamber.
- No fuel in tank-Supply fuel
- Clogged fuel line-Clean fuel line.
- Foreign matter in fuel cock-Clean fuel or if closed , open it.
- Clogged carburetor-Clean carburetor
CAUTION:
WARNING:

OWNER’S MANUAL
2) No electricity is generated at receptacle
1. AC protector
Check to make sure the AC protector is in the position.
2. Appliance
Check whether the appliance has been connected to the generator
when the engine is starting. Disconnect the appliance from receptacle.
3. Control box
Check wire leads in control box for loose connections.
Secure connections if necessary.
2. Engine oil system Insufficient
- Oil level is low-Add engine oil.
3. Electrical system
Poor spark
- Spark plug dirty with carbon or wet-
Remove carbon or wipe spark plug dry.
- Faulty ignition system-Consult dealer.
4. Compression insufficient
- Worn out piston and cylinder-Consult
dealer.
- Loose cylinder head nuts-Tighten nuts
properly
- Damaged gasket-Replace gasket.
5. Choke lever
- If the choke lever is not in proper position, set it to close position.
(After the engine runs , set the choke lever to open position.)
13
2000 WATT GENERATOR
8. STORAGE
1. AC protector
Check to make sure the AC protector is in the position.
2. Appliance
Check whether the appliance has been connected to the generator
when the engine is starting. Disconnect the appliance from receptacle.
3. Control box
Check wire leads in control box for loose connections.
Secure connections if necessary.
14
9. COMPLIANCE
You should get a Certificate of EPA while you purchased the product.

OWNER’S MANUAL
10. SPECIFICATIOIN
AC electrical
Current Output 120V @ 10A 60Hz
Continuous/rated Wattage 1200W
Peak Wattage 2000W
Outlet 2-120V receptacles
DC electrical
Current Output 12V @ 8.3A
Gasoline engine
Type 4-cycle OHV air-cooled
recoil start
Displacement 98cc
Oil Capacity 0.42 quart (0.4liter)
EPA Approved yes
Fuel
Type Unleaded gasoline
Capacity 1.32 gallons
Running Time 9 hours/half load (approx.)
Weight
Approximate Weight 54.56 lbs
15
2000 WATT GENERATOR
16
11. SYMBOL
symbol Parts name symbol Parts name
ENG. Engine OS Oil senser
SP Spark plug SC Auxiliary winding
FC Filed winding V
V oltmeter
MC AC winding C Capacitor
AC BR. AC circult breaker ST.MC Stator winding
DI rectifier T.C.I T.C.1 UNIT
SYMBOL WIRE COLOUR SYMBOL WIRE COLOUR
Y/G Yellow/green BR Brown
Y Yellow O Orange
R Red O/G Orange/Green
B Black BL Blue

OWNER’S MANUAL
17
12. Limited Warranty
KingCraft® warrants to the original purchaser who uses the product in a consumer
application (personal, residential or household usage) that all products covered under this
warranty are free from defects in material and workmanship for one year from the date of
purchase. All products covered by this limited warranty which are used in commercial
applications (i.e. income producing) are warranted to be free of defects in material and
workmanship for 90 days from the date of original purchase. Products covered under this
warranty include air compressors, air tools, service parts, pressure washers and generators.
KingCraft® will repair or replace, at KingCraft®’s sole option, products or
components which have failed within the warranty period. Service will be scheduled according
to the normal work flow and business hours at the service center location, and the availability
of replacement parts. All decisions of KingCraft® with regard to this limited warranty
shall be final.
Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvary
from state to state.
RESPONSIBILITY OF ORIGINAL PURCHASER (initial User):
To process a warranty claim on this product, DO NOT return item to the retailer. The product
mustbeevaluatedbyanAuthorizedWarrantyServiceCenter.Forthelocationofthenearest
Authorized Warranty Service Center call toll free 888.896.6881.
Retain original cash register sales receipt as proof of purchase for warranty to work.
Usereasonablecareintheoperationandmaintenanceoftheproductasdescribedinthe
Owner’s Manual(s).
DeliverorshiptheproducttotheAuthorizedWarranty Service Center. Freight costs, if any
must be paid by the purchaser.
If the purchaser does not receive satisfactory results form the Authorized Warranty Service
Center, the purchaser should contact KingCraft®.
2000 WATT GENERATOR
18
Limited Warranty (cont’d)
THIS WARRANTY DOES NOT COVER:
Merchandise sold as reconditioned, used as rental equipment, or floor or display models.
Merchandise that has become damaged or inoperative because of ordinary wear,
misuse, cold, heat, rain, excessive humidity, freeze damage, use of improper chemicals,
negligence, accident, failure to operate the product in accordance with the instructions
provided in the Owner’s Manual(s) supplied with the product, improper maintenance,
the use of accessories or attachments not recommended by KingCraft®,or
unauthorized repair or alterations.
Repair and transportation costs of merchandise determine not to be defective.
Costs associated with assembly, required oil, adjustments or other installation and
start-up costs.
Expendable parts or accessories supplied with the product which are expected to
b
Spark Plug, Air Filter)
ecome inoperative or unusable after a reasonable period of use. ( Example: Battery,
MerchandisesoldbyKingCraft® which has been manufactured by and identified
as the product of another company, such as gasoline engines. The product
manufacturer’s warranty, if any, will apply.
ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE
THATMAYRESULTFROMANYDEFECTS,FAILUREORMALFUNCTIONOFTHE
PRODUCTISNOTCOVEREDBYTHISWARRANTY.Somestatesdonotallowthe
exclusion, so it may not apply to you.
IMPLIEDWARRANTIES,INCLUDINGTHOSEOFMERCHANTABILITYORFITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM THE DATE OF
ORIGINAL PURCHASE. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you.
Distributed by
ALDI Inc.
www.aldi.us
Made in China

19
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
This list is provided for reference
purposes only.
All repairs and part replacement
should be performed by a
qualified technician.
Some parts may not be
available as single replacements.
APG3014-A-01-JD Crankcase assy. 1
APG3014-A-02-JD Oil seal 2
APG3014-A-03-JD Bearing 6203 1
APG3014-A-04-JD Crankcase gasket 1
APG3014-A-05-JD Drain bolt 2
APG3014-A-06-JD Washer 2
APG3014-A-07-JD Dowel pin 2
APG3014-A-08-JD Bearing 6203 1
APG3014-A-09-JD Crankcase cover 1
APG3014-A-10-JD Oil level cap assy. 2
APG3014-A-11-JD Flange bolt 6
APG3014-A-12-JD ”O” Ring 2
FIG A. CRANKCASE ASSY
20
General Parts Listing
2000W Generator
APG3014-B-03-JD Flange bolt 4
APG3014-B-02-JD Wire board 1
APG3014-B-01-JD Pipe 1
APG3014-B-04-JD Head cover comp 1
APG3014-B-05-JD Head cover gasket 1
APG3014-B-06-JD Press board 1
APG3014-B-07-JD Bolt M6x90 2
APG3014-B-08-JD Flange bolt 4
APG3014-B-09-JD Bolt M6x38 2
APG3014-B-10-JD Cylinder head assy. 1
APG3014-B-11-JD Cylinder head gasket 1
APG3014-B-12-JD Dowel pin 2
FIG B. CYLINDER HEAD
APA Part No. Description Qty.

21
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014-C-01-JD Connecting rod 1
APG3014-C-02-JD Semicircle key 2
APG3014-C-03-JD Crankshaft assy. 1
APG3014-C-04-JD Connecting rod cover 1
APG3014-C-05-JD Flange bolt 2
APG3014-C-09-JD Spring 1
APG3014-C-10-JD Piston 1
APG3014-C-06-JD First piston ring 1
APG3014-C-07-JD Second piston ring 1
APG3014-C-08-JD Oil ring guide slot 1
APG3014-C-11-JD Piston pin clip 2
APG3014-C-12-JD Piston pin 1
FIG C. CRANKSHAFT PISTON
22
General Parts Listing
2000W Generator
APG3014-D-02-JD Spring 1
APG3014-D-01-JD Pin A 1
APG3014-D-03-JD Pin B 1
APG3014-D-04-JD Slide block 1
APG3014-D-05-JD Lock ring 1
APG3014-D-06-JD Valve lifter 2
APG3014-D-07-JD Push rod 2
APG3014-D-08-JD Intake valve 1
APG3014-D-09-JD Exhaust valve 1
APG3014-D-10-JD Camshaft 1
APG3014-D-11-JD Pin 1
APG3014-D-12-JD Pinion 1
FIG D. CAMSHAFT
APA Part No. Description Qty.

23
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014-D-13-JD Valve spring 2
APG3014-D-14-JD Spring retainers 2
APG3014-D-15-JD Rocker ring 4
APG3014-D-16-JD Rocker seat 1
APG3014-D-17-JD Rocker arm shaft 2
APG3014-D-18-JD Adjusters screw 2
APG3014-D-19-JD Exhaust rocker 1
APG3014-D-20-JD Net M6 2
APG3014-D-21-JD Intake rocker 1
FIG D. CAMSHAFT
24
General Parts Listing
2000W Generator
APA Part No. Description Qty.
APG3014-E-01-JD Bolt 2
APG3014-E-02-JD Filter cover 1
APG3014-E-03-JD Air cleaner element 1
APG3014-E-04-JD Hold rack 1
APG3014-E-05-JD Net M6 2
APG3014-E-06-JD Filter seat 1
APG3014-E-07-JD Gasket 3
APG3014-E-08-JD Carburetor assy. 1
APG3014-E-09-JD Carburetor pipe 1
FIG E. AIR CLEANER

25
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014-F-01-JD Carburetor assy. 1
APG3014-F-02-JD Float 1
APG3014-F-03-JD Float pin 1
APG3014-F-04-JD Main nozzle 1
APG3014-F-05-JD Gasket 1
APG3014-F-06-JD Float chamber body 1
APG3014-F-07-JD Gasket 1
APG3014-F-08-JD Bolt 1
APG3014-F-09-JD Spring 1
APG3014-F-10-JD Pilot screw 1
APG3014-F-11-JD Bracket 1
APG3014-F-12-JD Needle assembly 1
FIG F. CARBURETOR
26
General Parts Listing
2000W Generator
APA Part No. Description Qty.
1tejniaMDJ-31-F-4103GPA
1tejtoliPDJ-41-F-4103GPA
1tloBDJ-51-F-4103GPA
1gnirpSDJ-61-F-4103GPA
1tloBDJ-71-F
-4103GPA
FIG F. CARBURETOR

27
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014-G-01-JD Bolt 2
APG3014-G-02-JD Nut M6 1
APG3014-G-03-JD Platen 1
APG3014-G-04-JD Spring washer 1
APG3014-G-05-JD Handle 1
APG3014-G-06-JD Washer 1
APG3014-G-07-JD Shaft 1
APG3014-G-08-JD Insulationframe 1
APG3014-G-09-JD Bolt 1
APG3014-G-10-JD Spring 1
APG3014-G-11-JD Socket 1
FIG G. GOVERNOR
28
General Parts Listing
2000W Generator
APA Part No. Description Qty.
APG3014-G-12-JD Spring 1
APG3014-G-13-JD Spring 1
APG3014-G-14-JD Link rod 1
APG3014-G-15-JD Nut M 6 2
APG3014-G-16-JD Governor arm 1
APG3014-G-17-JD Lockring 1
APG3014-G-18-JD Washer 1
APG3014-G-19-JD Governor shaft 1
APG3014-G-20-JD Lock ring 1
APG3014-G-21-JD Gear 1
APG3014-G-22-JD Governor slider 1
APG3014-G-23-JD Flyweight 2
APG3014-G-24-JD Adjust speed gear 1
APG3014-G-25-JD Washer 1
APG3014-G-26-JD Flywheel shaft 2
APG3014-G-27-JD Adjusts peed gear shaft 1
FIG G. GOVERNOR

29
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014-H-02-JD Stopping protective wires 1
APG3014-H-01-JD String frame 1
APG3014-H-03-JD Ignition coil assy. 1
APG3014-H-04-JD Flange bolt 2
APG3014-H-05-JD Spark plug 1
APG3014-H-06-JD Fan 1
APG3014-H-07-JD Flywheel 1
FIG H. IGNITION FLYWHEEL
30
General Parts Listing
2000W Generator
APA Part No. Description Qty.
APG3014- I -02-JD Bolt 3
APG3014- I -01-JD Handle 1
APG3014- I -03-JD Recoil starter case 1
APG3014- I -04-JD Starter spring 1
APG3014- I -05-JD Recoil starter rope 1
APG3014- I -06-JD Drum sheave 1
APG3014- I -07-JD Drive pawls 2
APG3014- I -08-JD Clip 1
APG3014- I -09-JD Drive plate 1
APG3014- I -10-JD Pin 1
APG3014- I -11-JD Bolt 4
APG3014- I -12-JD Flywheel cover 1
APG3014- I -13-JD Nut 1
FIG I. RECOIL STARTER
20

31
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014- I -14-JD Starter pulle 1
APG3014- I -15-JD Behind cover 1
APG3014- I -16-JD Bolt 2
APG3014- I -17-JD Front cover 1
APG3014- I -18-JD Air shroud 1
APG3014- I -19-JD Bolt 1
APG3014- I -20-JD Recoil starter assy 1
FIG I. RECOIL STARTER
32
General Parts Listing
2000W Generator
APA Part No. Description Qty.
APG3014- J-02-JD Rotor 1
APG3014- J-01-JD Front cover 1
APG3014- J-03-JD Bolt M8X185 1
APG3014- J-04-JD Stator 1
APG3014- J-05-JD Stator 1
APG3014- J-06-JD Bolt M6X105 4
APG3014- J-07-JD Rear cover 1
APG3014- J-08-JD Bush Assy. 1
APG3014- J-09-JD AVR. 1
APG3014- J-10-JD Tapping screw 2
APG3014- J-11-JD Generator cover 1
APG3014- J-12-JD Bolt 2
FIG J. magneto
12
3
45
6
8
7910 11
12
12

33
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014- K-1-JD Frame comp. 1
APG3014- K-2-JD Bottom rubber A 2
APG3014- K-3-JD Flange nut M8 9
APG3014- K -4-JD Bottom rubber B 4
APG3014- K-5-JD Bolt M8X16 3
APG3014- K-6-JD Bolt M8X55 2
APG3014- K-7-JD Bottom rubber C 2
FIG K. FRAME
1
2
3
3
4
7
546
3
34
General Parts Listing
2000W Generator
APA Part No. Description Qty.
APG3014-L -01-JD Fuel tank comp. 1
APG3014-L -04-JD Fuel valve 1
APG3014-L -03-JD Fuel filter 1
APG3014-L -02-JD Fuel filter cap comp 1
APG3014-L -05-JD Fuel tube 1
APG3014-L-06-JD Tank cushion rubber 4
APG3014-L -07-JD Flange bolt M6X16 4
FIG L. TANK
1
2
3
4
5
6
7

35
General Parts Listing
Owner’s Manual
APA Part No. Description Qty.
APG3014- M -01-JD ENGINE SWITCH ASSY 1
APG3014- M -02-JD OIL ALERT LAMP 1
APG3014- M -03-JD CONTROL PANEL COMP. 1
APG3014- M -04-JD 120V RECEPTACLE 1
APG3014- M -05-JD 120V RECEPTACLE 1
APG3014- M -06-JD EARTH TERMINAL SCREW 1
APG3014- M -07-JD CONTROL PANEL BACK BOX 1
APG3014- M -08-JD CIRCUIT PROTECTOR(8A) 1
APG3014- M -09-JD CIRCUIT PROTECTOR(10A) 1
FIG M. CONTROL PANEL
3
2