King Living Eto User manual

kingliving.com
Eto
King Living x Tom Fereday
Assembly Instructions
Leg & protective
foam housing.
Step 1
Ensure box is in correct orientation.
Flatten sides of box to expose the
desk top and legs in protective
foam housing.
Box contents
4 x 4 x 1 x
4 x
2 x Left
2 x Right
Remove leg and
protective foam
housing together.
Step 2
Remove leg and protective foam
housing in one unit.
Step 3
Gatherthe legs.
NOTE
The legs contain a special slotted
locking system that are left and
Left leg Right leg
Slotted leg
locking detail
Slotted leg
locking detail
Step 4
Align left and right legs to the
correct key locks and push legs
to the base.
NOTE
The rubber ORings will provide
Align slotted lock, then
push leg to base.
Ensure O Rings
remain attached.
and snug.
Step 5
Screw in to secure the legs.
Step 6
Insert power cable, then plug
into wall socket.
DT2020273 V1 KING LIVING CUSTOMER CARE: kingliving.com/support
Eto
STD Desk; Dining-Occ Table
Assembly Instructions
Two people are required for safe assembly.
Opening Boxes
DO NOT use a knife to open the King Living boxes as you may damage your furniture.
Peel o the tape, then lift & separate the cardboard aps to open.
Assemble your furniture by following the steps below.

kingliving.com
Eto
King Living x Tom Fereday
Assembly Instructions
Leg & protective
foam housing.
Step 1
Ensure box is in correct orientation.
Flatten sides of box to expose the
desk top and legs in protective
foam housing.
Box contents
4 x 4 x 1 x
4 x
2 x Left
2 x Right
Remove leg and
protective foam
housing together.
Step 2
Remove leg and protective foam
housing in one unit.
Step 3
Gatherthe legs.
NOTE
The legs contain a special slotted
locking system that are left and
Left leg Right leg
Slotted leg
locking detail
Slotted leg
locking detail
Step 4
Align left and right legs to the
correct key locks and push legs
to the base.
NOTE
The rubber ORings will provide
Align slotted lock, then
push leg to base.
Ensure O Rings
remain attached.
and snug.
Step 5
Screw in to secure the legs.
Step 6
Insert power cable, then plug
into wall socket.
KING LIVING CUSTOMER CARE: kingliving.com/support

kingliving.com
Eto
King Living x Tom Fereday
Assembly Instructions
Leg & protective
foam housing.
Step 1
Ensure box is in correct orientation.
Flatten sides of box to expose the
desk top and legs in protective
foam housing.
Box contents
4 x 4 x 1 x
4 x
2 x Left
2 x Right
Remove leg and
protective foam
housing together.
Step 2
Remove leg and protective foam
housing in one unit.
Step 3
Gatherthe legs.
NOTE
The legs contain a special slotted
locking system that are left and
Left leg Right leg
Slotted leg
locking detail
Slotted leg
locking detail
Step 4
Align left and right legs to the
correct key locks and push legs
to the base.
NOTE
The rubber ORings will provide
Align slotted lock, then
push leg to base.
Ensure O Rings
remain attached.
and snug.
Step 5
Screw in to secure the legs.
Step 6
Insert power cable, then plug
into wall socket.
KING LIVING CUSTOMER CARE: kingliving.com/support

kingliving.com
Eto
King Living x Tom Fereday
Assembly Instructions
Leg & protective
foam housing.
Step 1
Ensure box is in correct orientation.
Flatten sides of box to expose the
desk top and legs in protective
foam housing.
Box contents
4 x 4 x 1 x
4 x
2 x Left
2 x Right
Remove leg and
protective foam
housing together.
Step 2
Remove leg and protective foam
housing in one unit.
Step 3
Gatherthe legs.
NOTE
The legs contain a special slotted
locking system that are left and
Left leg Right leg
Slotted leg
locking detail
Slotted leg
locking detail
Step 4
Align left and right legs to the
correct key locks and push legs
to the base.
NOTE
The rubber ORings will provide
Align slotted lock, then
push leg to base.
Ensure O Rings
remain attached.
and snug.
Step 5
Screw in to secure the legs.
Step 6
Insert power cable, then plug
into wall socket.
KING LIVING CUSTOMER CARE: kingliving.com/support

kingliving.com
Eto
King Living x Tom Fereday
Assembly Instructions
Leg & protective
foam housing.
Step 1
Ensure box is in correct orientation.
Flatten sides of box to expose the
desk top and legs in protective
foam housing.
Box contents
4 x 4 x 1 x
4 x
2 x Left
2 x Right
Remove leg and
protective foam
housing together.
Step 2
Remove leg and protective foam
housing in one unit.
Step 3
Gatherthe legs.
NOTE
The legs contain a special slotted
locking system that are left and
Left leg Right leg
Slotted leg
locking detail
Slotted leg
locking detail
Step 4
Align left and right legs to the
correct key locks and push legs
to the base.
NOTE
The rubber ORings will provide
Align slotted lock, then
push leg to base.
Ensure O Rings
remain attached.
and snug.
Step 5
Screw in to secure the legs.
Step 6
Insert power cable, then plug
into wall socket.
KING LIVING CUSTOMER CARE: kingliving.com/support

kingliving.com
Eto
King Living x Tom Fereday
Assembly Instructions
Leg & protective
foam housing.
Step 1
Ensure box is in correct orientation.
Flatten sides of box to expose the
desk top and legs in protective
foam housing.
Box contents
4 x 4 x 1 x
4 x
2 x Left
2 x Right
Remove leg and
protective foam
housing together.
Step 2
Remove leg and protective foam
housing in one unit.
Step 3
Gatherthe legs.
NOTE
The legs contain a special slotted
locking system that are left and
Left leg Right leg
Slotted leg
locking detail
Slotted leg
locking detail
Step 4
Align left and right legs to the
correct key locks and push legs
to the base.
NOTE
The rubber ORings will provide
Align slotted lock, then
push leg to base.
Ensure O Rings
remain attached.
and snug.
Step 5
Screw in to secure the legs.
Step 6
Insert power cable, then plug
into wall socket.
KING LIVING CUSTOMER CARE: kingliving.com/support