King Living Serenade User manual

1 3
4 5 6
2
Serenade
Connect tub halves.
Connect leg to side.
Connect & secure tub halves.
Lower side onto tub.
Connect leg to side.
Layout Components as shown. Follow the Steps until
assembly completed. Please note: The Serenade has
been designed with a ‘Click System’ for attaching the Bed
Rail to the Bed Frame.
Line up legs to the tub indents.
Two people are required for Safe Assembly.
Assembly Instructions

7 8 9
10 11 12
13 14 15
16 17 18
Repeat for both sides.
Attach one end of spreader rail. When sides joined with the head & end,
cover the exposed corner leg pins with
triangle pieces – as shown.
Connect frame together with four
(4) bolts.
Lower bed end onto tub.
Attach other end of spreader rail
and push together.
Unscrew the bolt to release the
transport securing mechanism.
Take care not to scratch the timber.
Screw in securely with the
provided Allen Key.
Connect to sides using leg pins.
Lower bed head onto
tub and leg pins.
Screw-in the bolt to secure lever
arm in the correct position.
Ensure all four (4) bolts are secured.

24
19
25
20 21
22 23
Click System: With bed in bed-
making position, lower frame onto
bed rail. Line-up knobs with receivers.
With bed still open, tighten all
screws & bolts to ensure bed
frame, bed rail and bed base are
all securely attached.
Click System: Push-in until all four
(4) connectors ‘click’ securely.
Place mattress on top of bed
frame carefully.
Click System: Bed frame is now
secured to bed rail.
Line-up mattress supports with
receiving holes and push the
supports into bed frame.
Close the assembled bed.
DT2015042 V8
KING LIVING
CUSTOMER CARE:
AUSTRALIA:
T 1300 135 464
E [email protected]
W kingliving.com.au
NEW ZEALAND:
T 0800 546 422
E [email protected]
W kingliving.co.nz
SINGAPORE:
T [phone]
E [email protected]
W kingliving.com.sg
MALAYSIA:
T [phone]
E [email protected]
W kingliving.my