Kingray KRH100 User manual

QUICK START GUIDE
4 x DVB-S/S2/T/T2/C to 4 x DVB-T/C
FTA Regenerating Headend - KRH100
1. Introduction
Congratulations on purchasing the KRH100. You now own
a high quality, professional mini DTV headend.
To get the most out of your purchase, please take the time
to carefully read through this quick start guide.
2. Product Details
DESCRIPTION:
The KRH100 is a very powerful, all-in-one mini headend
device, able to receive up to 4 independent satellite
(DVB-S/S2), terrestrial (DVB-T/T2) or cable (DVB-C) signals
and convert them either in 4 x DVB-T/C RF output channels.
It supports “pool” technology, meaning that the user
is able to select any program from any of the 4 inputs
and assign them to any of the 4 outputs providing great
flexibility.
The embedded web server of the KRH100 provides a very
friendly user interface as well as the ability of remote or
local control of the device via LAN.
Its small size and its powerful features render the KRH100
the ideal solution in case you want to distribute FTA
(Free-To-Air) TV programs coming from satellite (DVB-S/S2),
terrestrial (DVB-T/T2) or cable (DVB-C) sources to a CATV
installation using the DVB-T/C.
FEATURES:
• 4 x independent multi-standard inputs DVB-S/S2/T/T2/C
• 1 x RF output containing up to 4 x DVB-T/C channels
(software selectable)
• “Pool” technology
• MER value > 42dB
• PID filtering
• Redundancy mode compatible
• Custom NIT/SDT
• Local or remote control via webserver
• User friendly interface
• Wall or rack mount options
• SNMP v2
• Ultra-compact in size
• 5 Year Warranty (KRH100) & 3 Year Warranty (Power
Supply)
3. Installation
The KRH100 has a user friendly interface for programming
and monitoring purposes.
The user is able to gain access to the embedded webserver,
by opening an Internet browser (e.g. Internet Explorer,
Firefox or Chrome) that supports HTML 5.0 and type the
following static IP: 192.168.1.205.
The default username and password are as follows:
Username: admin
Password: 12345
Quick Setup - For pass through of all channels /
parameters only.
STEP 1 -
1. Select “Regional settings” from the side bar.
2. From the “Please select your region” drop down list,
select Australia.
STEP 2 -
1. Select “Input” from the side bar. It will automatically
default to INPUT 1 for programming.
2. From the “Tuner” drop down list, select DVB-T/T2
3. From the “Channel” drop down list, select your
desired channel, i.e. 6.
4. Click “Apply” & the click “Yes, apply” to save.
5. Select “Input 2”.
6. Repeat points 2, 3, & 4. Then repeat this process for
Input 3 & 4 as required.
STEP 3 -
1. Select “TS configuration” from the side bar.
2. Click the grey box for each input you have
programmed. This will allow all channels/parameters
to pass through unconditionally.
3. Click “Apply” & the click “Yes, apply” to save.
STEP 4 -
1. Select “RF output” from the side bar.
2. For Output 1, from the “Channel” drop down
list, select the desired output channel, i.e. 6. The
remaining outputs will automatically populate.
3. Click “Apply” to save.
4. If required, adjust the RF outputs level from the
output level section below.
5. Click “Apply output levels” to save.
The headend installation is now complete.
4. More Information
You can download the full manual at www.kingray.net.au
Specialists in TV Signal Amplification

This warranty against defects is given by Standard
Communications Pty Ltd ACN 000 346 814 (We, us, our
or GME). Our contact details are set out in clause 2.7. This
warranty statement only applies to products purchased
in Australia. Please contact your local GME distributor for
products sold outside of Australia. Local distributor details
at www.gme.net.au/export.
1. Consumer guarantees
1.1 Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
1.2 To the extent we are able, we exclude all other
conditions, warranties and obligations which would
otherwise be implied.
2. Warranty against defects
2.1 This warranty is in addition to and does not limit,
exclude or restrict your rights under the Competition
and Consumer Act 2010 (Australia) or any other
mandatory protection laws that may apply.
2.2 We warrant our goods to be free from defects in
materials and workmanship for the warranty period
(see warranty table) from the date of original sale (or
another period we agree to in writing). Subject to our
obligations under clause 1.2, we will at our option,
either repair or replace goods which we are satisfied
are defective. We warrant any replacement parts for
the remainder of the period of warranty for the goods
into which they are incorporated.
2.3 To the extent permitted by law, our sole liability for
breach of a condition, warranty or other obligation
implied by law is limited
(a) in the case of goods we supply, to any one of the
following as we decide -
(i) the replacement of the goods or the supply of
equivalent goods;
(ii) the repair of the goods;
(iii) the cost of repairing the goods or of acquiring
equivalent goods;
(b) in the case of services we supply, to any one of the
following as we decide –
(i) the supplying of the services again;
(ii) the cost of having the services supplied again.
2.4 For repairs outside the warranty period, we warrant
our repairs to be free from defects in materials and
workmanship for three months from the date of the
original repair. We agree to re-repair or replace (at our
option) any materials or workmanship which we are
satisfied are defective.
2.5 We warrant that we will perform services with
reasonable care and skill and agree to investigate any
complaint regarding our services made in good faith.
If we are satisfied that the complaint is justified, and
as our sole liability to you under this warranty (to the
extent permitted at law), we agree to supply those
services again at no extra charge to you.
2.6 To make a warranty claim you must before the end of
the applicable warranty period (see warranty table),
at your own cost, return the goods you allege are
defective, provide written details of the defect, and
give us an original or copy of the sales invoice or some
other evidence showing details of the transaction.
2.7 Send your claim to: Standard Communications Pty Ltd.
17 Gibbon Road, Winston Hills, NSW 2153, Australia.
Tel: [phone],
Fax: [phone]
Email: [e-mail]
2.8 If we determine that your goods are defective, we will
pay for the cost of returning the repaired or replaced
goods to you, and reimburse you for your reasonable
expenses of sending your warranty claim to us.
3. What this warranty does not cover
3.1 This warranty will not apply in relation to:
(a) goods modified or altered in any way;
(b) defects and damage caused by use with non
Standard Communications products;
(c) repairs performed other than by our authorised
representative;
(d) defects or damage resulting from misuse, accident,
impact or neglect;
(e) goods improperly installed or used in a manner
contrary to the relevant instruction manual; or
(f) goods where the serial number has been removed or
made illegible.
4. Warranty period
4.1 We provide a 5 year warranty on the KRH100 and
3 year warranty on power supply. No repair or
replacement during the warranty period will renew
or extend the warranty period past the period from
original date of purchase.
STANDARD COMMUNICATIONS CONTRACT WARRANTY AGAINST DEFECTS
A division of Standard Communications Pty Ltd.
Head Office: PO Box 96, Winston Hills, NSW 2153, Australia.
New Zealand: PO Box 58446 Botany, Auckland, 2163, NZ. T: [phone].
All international enquiries email: [email protected]
Drawing No: 51437-3
Part No: 311124