
2
CARE
SAFETY
HOW TO USE
• Wash with warm soapy water.
• Keep seal clean and free from debris.
• Inspect periodically for damage.
• This product is manufactured from a material that has a high resistance to UV damage.
However, to ensure prolonged use without deterioration cause by UV radiation, it is best
practice to keep the product out of direct sunlight when possible.
• This product has components made from steel which has a durable coating. After exposure
to salty environments be sure to wipe clean with a soapy water solution.
The storage box is supplied with latch retainers. The purpose of these is to assist in reducing the
incidence of the latch accidental opening. Use the retainers whenever the storage box is closed
and latched. Simply pass the head of the retainer through the eye of the latch base where a
padlock can be installed.
This product is not designed to be used as a step or ladder, standing on top of this product may
be dangerous and is not recommended.
Be sure to open the lid fully so that it will not accidentally close whilst your arms or arms are
inside the box, be conscious of wind direction and the effect it will have on the lid.
1. Unplug the retainers and open latches.
2. Place articles inside the storage box being careful to ensure that items which when placed
together will cause a chemical reaction are kept in separate storage boxes.
3. The storage box is tted with a lid over extension restraining device, this should not be
forced. The lid should be opened to the point where it reaches it’s over extension restraining
device and not forced beyond that.
4. Before closing the lid make sure the seal and seal seat are clean and free of debris.
5. Close the lid and latch tight, use the latch retainers or a pad lock to secure the latches.
6. There are tie down points on the box to facilitate it being securely fastened during transport.
When lifting, ensure you employ a good lifting technique, lifting using 2 people where
possible.