
IMPORTANT:
This product should be installed by a
competent person and in accordance ith
the IET Wiring Regulations.
If in doubt, consult a qualified electrician.
These instructions should be read care ully
prior to any installation and retained a ter
completion or urther re erence and
maintenance. Please give these
instructions to the building owner/occupier
a ter installation.
Always turn o the power source be ore
commencing work on this device.
Part numbers:
LEDFL10, LEDFL20, LEDFL30, LEDFL50,
LEDFL80, LEDFL120 & LEDFL150
Installation / Operating
Instructions for
IP65 LED Floodlight Fittings
IMPORTANT INFORMATION
INSTALLATION INSTRUCTIONS
This luminaire is water resistant to IP65 but
it is advisable, wherever possible, to locate it
in a sheltered location. No modi ication
should be made to the casing to preserve the
moisture properties and warranty.
This itting is supplied pre-wired with 0.9M
o three core cable (Live, Neutral and Earth).
This cable can NOT be removed. Connection
must be made via a suitable terminal box.
Should the lex become damaged it should
be replaced with cable o the same
speci ication and only by a competent
person. To avoid a heat build up it is
advisable that a clear air gap is le t around
the luminaire and the ront ace should be at
least 500mm away rom any combustible
sur ace. The supplied bracket should be used
at all times or mounting.
TECHNICAL INFORMATION
This appliance is designed to work with a
mains voltage o 100V to 250V AC 50Hz.
It should be wired to an appropriately used
and protected source.
Lumen Output: 10W700lm
20W1400lm
30W2100lm
50W3500lm
80W5600lm
120W9000lm
150W10500lm
LEDFL10 20 30 50 80 120 150 Ins.qxp_MR16 11/02/2016 12: