Please connect the same color or same
polar wires together.
Brown“L”
Black“L”
White “N”
Green “ ”
Retention wire
Retention wire
Please connect the same color or same
polar wires together.
Blue“N”
A Diagram
B Diagram
Yellow green" "
Connect the power wire and make insulation and water-proof
processing. Please look at detail A/B at the wiring place.
(please connect wires as per appropriate color of power cords as
shown in A/B diagram. )
2Tap the M10 screws into the holes as the sketch shows.
1Drill 2 holes in the cement wall/ground with electrical drill.
Spacing: 180mm.
The length of M10 expansion screw and the depth of the
hole should be 60mm or more than 60 mm.
2-Ø10mm 180mm
Cement wall/Ground
L
W H
34
ARTEMIS series light installation instructionfloodlight
Note：The product pictures in the manual take FL2F3004Artemis series floodlight light for example.
Mounting height≥8m, the maximum projection area of undergoing
wind: L(m) x W(m) x 0.5
Warning: Luminaire can not be directly installed on the surface of ordinary flammable material in any circumstance.
Warning: If outer flexible cable or cord of luminaire are damaged, only manufacturer, its agent or eligible people
can replace them to avoid accident.
Installation Instruction
Please look at detail A/B on
the wiring place.
Please look at detail A/B on
the wiring place.
Lock mounting bracket into the cement wall/ground with plain
washer, spring washer and M10 nut. Figure in the mounting
surface drilling a M6 hole depth≥50mm ( expansion screw
specifications M6x50mmL ), the steel wire rope is fixed on the
drilling well. M6 hole by expansion screws M6.
229
253
315
377
439
501
563
625
330
330
330
330
330
330
330
330
259
259
259
259
259
259
259
259
FL2F3002
FL2F3001
FL2F3003
FL2F3004
FL2F3005
FL2F3006
FL2F3007
FL2F3008
unit: mm
ARTEMIS
W H
Product name L
Model No.
Product Dimension
Plain Washer
Spring Washer
M10 Nut
