Kisai ADJUST User manual

Change the way you think about time

INSTRUCTION MANUAL
Button A
Button B

1. How to read the time
• Press button A to display the time.
• The LEDs will light up and the time will be shown.
• The time is displayed digitally with hours in the upper half of
the screen and minutes in the lower half of the screen.
• The time display will turn off after 10 seconds.
Examples
03:54
12:08

2. How to read the date
• Press button B to display the date.
• The date icon indicates that you are in date mode.
• The LEDs will light up and the date will be shown.
• The date is displayed digitally with the month in the upper
half of the screen and the date in the lower half of the screen.
• The date display will turn off after 10 seconds.
Examples
Date icon
June 17th October 29th

Examples
3. How to check the alarm time
• Press button B twice to display the alarm time.
• The alarm mode icon indicates that you are in alarm mode.
• The PM icon indicates that the alarm time is set in PM.
• The alarm on icon indicates that the alarm is on.
• The alarm time display will turn off after 10 seconds.
alarm mode icon
alarm on icon
12:00 PM alarm on
07:30 AM alarm on

4. How to set the time
• The time can be displayed vertically or horizontally.
• Press button B to change the display mode as required.
• Press button A to confirm and move to 12/24 hour mode.
• The time can be displayed in 12 or 24 hour mode.
• Press button B to change the time mode as required.
• Press button A to confirm and move to the hour.
I. Setting the time display mode
II. Setting 12/24 Hour Mode
• When the time is displayed, press and hold button A for 3
seconds to enter setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate
10:36
12 hour mode 24 hour mode
10:36

• The hour LEDs will flash when you are in hour setting
mode.
• The PM icon in setting mode indicates that you are
setting the time in PM. This icon only appears in
12 Hour mode.
• Press button B to increase the hour as required.
• Press button A to confirm and move to the minutes.
III. Setting the hour
• The minute LEDs will flash when you are in minute
setting mode.
• Press button B to increase the minutes as required.
• Press button A to confirm and move to the animation.
IV. Setting the minutes
V. Setting the animation
This watch has a light-up animation feature. When set, the
LEDs will animate on 00 , 15, 30 and 45 minutes past the
hour between 6pm and midnight.
• In setting mode, when the animation feature is on,
the LEDs will animate.
• In setting mode, when the animation feature is off,
all LEDs will flash.
• Press button B to turn the animation on or off.
• Press button A to confirm and exit setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate

5. How to set the date
• When the date is displayed, press and hold button A for 3
seconds to enter date setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate
• The date mode icon will be displayed and the year
LEDs will flash when you are in year setting mode.
• Press button B to increase the year as required.
• Press button A to confirm and move to the month.
• The date mode icon will be displayed and the month
LEDs will flash when you are in month setting mode.
• Press button B to increase the month as required.
• Press button A to confirm and move to the date.
• The date mode icon will be displayed and the date
LEDs will flash when you are in date setting mode.
• Press button B to increase the date as required.
• Press button A to confirm and exit date mode.
*Note after 10 seconds of inactivity setting mode will deactivate
I. Setting the year
II. Setting the month
III. Setting the date

Example
• When the alarm time is displayed, press and hold button A
for 3 seconds to enter alarm setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate
• The alarm mode icon indicates that you are in alarm setting
mode.
• Press button B to turn the alarm ON or OFF. The alarm on
icon will light up when the alarm is on.
• Press button A to confirm and move to the alarm hour.
• Press button B to increase the alarm hour as required.
• The PM icon in alarm setting mode indicates that you are
setting the time in PM. This icon only appears in 12 Hour mode.
• Press button A to confirm and move to the alarm minutes.
• Press button B to increase the alarm minutes as required.
• Press button A to confirm and exit alarm setting mode.
6. How to set the alarm
09:45 AM alarm on
alarm mode icon
alarm on icon

7. How to change the LED color
8. Number samples
• Press and hold button A for 3 seconds to enter setting mode.
*Note after 10 seconds of inactivity setting mode will deactivate
• You can choose from 7 different LED display colors.
• Press button B to change the LED color.
• This watch displays the time digitally using a combination of
LED triangles. It looks cryptic but is as easy to read as a
regular digital watch. The numbers used are shown below.
1
6
2
7
3
8
4
9
5
0

9. How to recharge the battery
• This watch has a USB rechargeable battery.
• When the lights become dim or do not light up, you should
recharge the battery.
• To recharge the battery, unscrew the USB cap using the
screw driver provided and connect the USB charging cable
to the USB charging jack.
• Connect the charging cable to a power source,
e.g. your computer.
• When charging, the LED charging indicator will blink.
• When the charging indicator stops blinking, the battery is
90% charged.
It is advised that you continue to charge the battery for a
full 3.5 hours to ensure the battery is 100% charged.
charging indicatorcharging indicator
• It is advised that you use the screw driver provided when
opening the USB cap so as not to damage the head of
the screw.

• Watch
• USB cable
• Spare USB cap
• Screwdriver
• Instruction Manual
10. Items included in the box

• This watch is covered by a 1 year warranty. This warranty
does not cover water damage, accidental damage, neglect
or unauthorized repair.
II. Warranty
11. User information
I. Battery
• This watch uses an PL301517 rechargeable battery only.
• Battery lifetime will vary depending on use, but is
estimated at approximately 300 charges.
• To maximise battery life you should limit the use of
the animation.
• The plug standard input voltage for the PL301517 battery
is DC3.7V. You should use only the cable provided with
the watch when recharging.
This watch has limited water resistance. Please do not use
the watch in the shower, for swimming or for other water
related activities.
III. Caution
•

Case Material
Case Dimensions
Maximum Fit
Wrist Size
Display
Strap Material
Finish
Weight
Battery
Wood
Wood
31.5mm x 56mm x 12mm
210mm (approx.)
Digital Tube LED
Clear Coating
65g
PL301517 USB rechargeable
SPECIFICATIONS