Kisai Satellite-X User manual

Change the way you think about time
INSTRUCTION MANUAL
Button A
Button B
1. How to read the time
• Press button A to display the time.
• All LEDs will light up and the time will be shown.
• The current time is indicated by the blinking LEDs.
• The time display will turn off after 7 seconds.
Examples
Hours Ring 1-12
PM / Charging Indicator
12:06 10:17
Minutes Ring
Groups of 5
5, 10, 15, 20, etc
Single Minutes Ring
1-4
• The hour LEDs will flash when you are in hour setting
mode.
• Press button A to increase the hours as required.
• The PM indicator will flash to indicate PM mode.
• Press button B to confirm and move to the minutes.
• The minute LEDs will flash when you are in minute
setting mode.
• Press button A to increase the minutes as required.
• Press button B to confirm and move to the animation.
This watch has a light-up animation feature. The LEDs
will animate once every 15 minutes between 6pm and
12am.
• In setting mode, when the animation feature is on,
the LEDs will animate.
• In setting mode, when the animation feature is off,
all LEDs will flash.
• Press button A to turn the animation on or off.
• Press button B to confirm and when the LEDs go out,
setting is complete.
*Note after 7 seconds of inactivity setting mode will
deactivate*
I. Setting the hour
II.Setting the minutes
III.Setting the animation
12 o’clock light is flashing
5 minute light is flashing
1 minute light is flashing
10 o’clock light is flashing
15 minute light is flashing
2 minute lights are flashing
2. How to set the time and animation
• Press and hold button B for 3 seconds to enter setting
mode.
*Note after 7 seconds of inactivity setting mode will
deactivate*
PM / Charging Indicator

PM / Charging Indicator
• This watch is covered by a 1 year warranty. This warranty
does not cover water damage, accidental damage, neglect
or unauthorized repair.
II. Warranty
• This watch uses a PL301517 rechargable watch battery.
• The battery should last about 1 month between charges.
• The battery lifetime is expected to be 300 charges.
• Only use the cable provided with the watch for recharging,
as it is designed specifically for this watch.
7. User information
I. Battery
III. Caution
3. How to recharge the battery 4. Items included in the box
• To recharge the battery, connect the USB charging cable
provided to the watch USB port and then to a power source,
e.g. your computer.
• To open the watch USB port, use the screw driver included.
• When charging, the charging indicator will flash.
• When the charging indicator stops flashing, the watch is
90% charged.
• It is advised that you continue to charge the watch for a full
3.5 hours to ensure the battery is 100% charged. Case Materials
Case Dimensions
Maximum Fit
Wrist Size
Display
Strap Materials
Finish
Weight
Battery
Water Resistance
Stainless Steel
Silicone
29mm x 50mm x 11.5mm
210mm (approx.)
LED Digital Tube
Brushed / Polished
70g
PL301517
3ATM
SPECIFICATIONS
Included in the box
• Watch
• USB cable
• Screw driver
• Spare USB cap
• Watch manual
• This watch is water resistant to 3ATM. Please do not use
the watch in the shower, for swimming or for other water
related activities.