4. How to set the time
The hour digits will flash when you are in hour
setting mode.
The AM or PM indicator in setting mode indicates that
you are setting the time in AM or PM.
The AM indicator is a dot at the top in the center of the
display. The PM indicator is a dot at the bottom in the
center of the display.
button B to increase the hour as required.
button A to confirm and move to the minutes.
The minute digits will flash when you are in minute
setting mode.
button B to increase the minutes as required.
button A to confirm and move to the animation.
The display will either flash or animate when you are in
animation setting mode.
button B to turn the animation on or off. When the
animation is off, the display will flash, when the
animation is on, the display will animate.
button A to confirm and exit setting mode.
I. Setting the hour
II. Setting the minutes
III. Setting the animation
button A for 3 seconds to
enter setting mode.
*Note after 5 seconds of inactivity setting mode will deactivate