KJstar Z07-5 User manual

Wireless Mobile Phone Monopod
Product Manual
V1.0
Mode I: Z07-5

2
Thanks very much for using Wireless Mobile phone Monopod from
Kjstar.This product is based on Bluetooth HID wireless communication
technology, currently suitable for the products had installed iOS 4.0 and
Android 3.0 or later. Please make sure that you products can support the
system before using!
1. Function
Autodyne and video wirelessly by Mobile
2. Description of the whole package
Wireless Mobile Phone Monopod: l piece
Phone Clamp: 2 piece
USB Charging Cable: 1 piece
Product Manual: 1 piece
Warranty Card: 1 piece
3. Specification
3.1 Working environment temperature: -10°C - +40°C
3.2 Working environment relative
Humidity: 10%-90%;
3.3 Battery Capacity: 45mAH;
3.4 Charging Voltage: DC 5.0V;
3.5 Charging Time: 1 hour;
3.6 Autodyne Frequence: 500 times;
3.7 Standby Time: 100 hours;
3.8 Memory quantity: 4 times;
3.9 The product automatically goes to
“sleep” within 2 hours unused, It will “wake up” 5 seconds later
after pressing the key of “press”.
4. Usage instructions

3
4.1 Full charging time: 1 hour
4.2 Pairing: Mobile phone and Monopod
Apple iOS System: open the “Setting” -> Bluetooth-> turn on
monopod-> Searching autodyne system “kjstar”-> enter the system
-> complete Pairing
Android System: open the “Setting” ->B1uetooth->Scanning->turn
on monopod->Searching autodyne system “Kjstar" -> enter the
system"-> complete Pairing
- The pairing of camera and monopod need not password, The
pairing is on-going when the blue led light is flashing quickly,
please operate it within 40 seconds, otherwise, you need to restart
the power, rescan and repair.
4.3. Autodyne put the mobile phone to the monopod -> enter
camera application -> stretch the monopod ->press the key of
“press”
- If the Android system can not work well normally, please
download: kjstar365 Professional Autodyne Software.
5. Caution and safety
5.1 Please read the instruction carefully before usage;
5.2 Please turn off the nearby Bluetooth to avoid the signal
interference;
5.3 It may conflict when using some mobile phone keyboard with
it simultaneously, please close the Bluetooth or turn off the power
of monopod.
5.4 Safety
5.4.1 Please do not dismantle the product;
5.4.2 Please do not use corrosive solvent to clean it;
5.4.3 Forbidden to use it or charging under high temperature
or strong light;
5.4.4 Forbidden to use it in the rain with damp or soaked;

4
5.4.5 Forbidden to throw it into fire, so as to avoid explosion;
5.4.6 Please do not knock it heavily.
6. Other cautions:
6.1 No Power or Power turned off: LED turned off
6.2 Bluetooth Pairing: Blue LED light keep flashing at middle
frequency
6. 3 Taking photo: Blue LED Light flash one time
6.4 B1uePairing Successfulyor Wake up Sleep: LED Light keep
flashing quickly.
6.5 Low voltage: LED Light keep flashing slowly.
6.6 Charging: Red LED Light on; Full Charging Red LED light
off.