kleankin 834-392V81 User manual

WALL-MOUNTED LED
BATHROOM MIRROR
IN220901735V01_US
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
834-392V81
INSTRUCTION MANUAL
INSTRUCTION MANUAL

Country Phone Email
001-877-644-9366 [email protected]US
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please
read all the instructions in this user's manual. If you have any questions, please contact
our customer care center.
Our contact details are below:

ILLUSTRATE
SPECIFICATIONS
SPECIAL FEATURE
70cm
70cm
[Product Name] Wall-Mounted LED Bathroom Mirror
[Material] Aluminum frame+Glass
[Color Temperature] 3000-6500K
[Power Supply] Power driver,120V/60Hz
[Product Size] 70*70cm (27.6*27.6 inch)
5mm Thickness high definition eco-friendly glass mirror
Free to switch between warm,natural and cool light
Built-in touch sensor switch
Built-in power plug
LED Light
High definition mirror
Touch sensor switch,long
pressing to adjust brightness

PACKING LIST
OPERATING INSTRUCTIONS
INSTALLATION METHOD
(1) Please use standard plug to connect the
power directly.
(2) When the plug is connected to the power
supply,the switch lights red and the power
is on.press on/off switch to turn the light
on,press anti-fog switch to open anti-fog
function.
(3) 100%brightness when turned on, long
pressing to adjust the brightness.
(4) Press the light switch to switch between warm,
natural and cool light.
(5) Unplug when it is no used.
① Prepare tape measure,electric drill,hammer,screwdriver,pliers.
② Determine the appropriate height on a solid wall and draw
two punctuations with a horizontal distance of 30 cm .
③ Drill holes in the punctuation, the depth of the hole is 3cm,
knock the rubber plug into the hole, and then screw the
screw, the screw is 2cm above the wall.
④ Pick up the product with both hands and hang it with the
hook on the back of the product.
30cm

Please read these safety precautions carefully before using the product.
Do not disassemble or alter the components of the mirror.
Press the touch sensor gently.
Keep the mirror dry. Moisture reduces the sensitivity of the appliance.
Turn off and unplug the mirror before cleaning it. Use a glass cleaner.
Make sure the mirror is completely dry before using it.
Turn power off, and avoid direct sunlight, when mirror is stored for a long period,
and keep it away from children’s reach.
Before using your mirror, make sure that your charging device is adequate for
its voltage.
In case of a fire or explosion, do not touch or throw the mirror into the fire.
Stop using your mirror if an abnormal situation occurs.
We reserves the right of any modification of the product involving design and
specification,all the materials here are for your reference only and are subject
to the products you received. No further notice be given for any technical
parameters changed.
SAFETY INSTRUCTIONS