Klipsch R-3800-W User manual

R-3800-W
Discrete but not understated, the high-
performance and installer-friendly R-3800-
W in-wall loudspeaker delivers all the gusto
you’d expect from Klipsch.
Featuring an 8-inch copper-colored IMG
woofer, a 1-inch aluminum tweeter,
exclusive Tractrix® Horn technology, as well
as a treble contour switch, this dynamic in-
wall speaker gives you plenty of bang for
your buck and brings high-quality
entertainment into your home without
taking up valuable floor space.
Available in a white finish, the R-3800-W can
be paired with one of Klipsch’s new
installation kits (sold separately). Each of
these revolutionary kit designs allow for
increased mounting flexibility and
incorporate a mud ring, wire tie and
universal metal mesh wing for multi-position
placement and a color-coded bracket for
easy speaker size identification.
8" Two-Way In-Wall Loudspeaker
SPECIFICATIONS
FREQUENCY RESPONSE 46Hz-20kHz ± 3dB
SENSITIVITY 93dB @ 1 watt/1 meter
NOMINAL IMPEDANCE 8 ohms
CROSSOVER FREQUENCY 2200Hz
POWER HANDLING 50 watts (200 watts peak)
ENCLOSURE MATERIAL/TYPE ABS/ Infinite baffle, front flush with wall
DRIVE COMPONENTS Two-way system using one 1" (2.54cm)
Aluminum dome compression tweeter with a
6" (15.24cm) square 90° x 60° pivoting
Tractrix®Horn and one 8" (20.32cm)
IMG woofer
WIRE GAUGE ACCOMMODATED 12
WEIGHT 7.9 lbs. (3.6kg)
HEIGHT 16.1" (40.89cm)
WIDTH 10.6" (26.92cm)
MOUNTING DEPTH 3.75" (9.5cm)
CUTOUT DIMENSIONS 14.75" (37.47cm) x 9.25" (23.50cm)
FINISH White
INSTALLATION KIT IK-800-W (sold separately)
■High sensitivity and power handling
■Pivoting Tractrix Horn compression driver tweeter for clear sound in
any location
■Treble attenuation switch and IR receiver knock out
■Single piece grille frame and rustproof aluminum grille
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004