KMART 42702672 User manual

Parts List 01
A. Base
x 2
B. Base Cap
x 2
C. Base Support Plate
x 2
D. Base Plug
x 1
E. Base Plug Cover
x 1
F. Base Plate
x 1
G. Spring Cover Cap
x 1
H. Lower Pole
x 1
I. Middle Pole
(With a detached plastic ring in the pack)
x 1
J. Height Adjustment Knob
x 1
K. Upper Pole
x 1
L. Foam Cover
x 1
M. Punch Ball
x 1
n. Bolt M8 x 50mm
x 1
q. Bolt M6 x 30mm
x 2
r. Nut M6
x 2
o. Bolt M8 x 12mm
x 4
p. Bolt M8 x 16mm
x 4
Keycode: 42702672
Boxing Stand
02Assembly Instructions
Keycode: 42702672
Boxing Stand
Step 1
Turn the 2 x Base (A) over and connect them using 2 x Base
Support Plate (C) and 4 x Bolts M8 x 8mm (o).
Step 2
Attach Base Plate (F) to the Base (A) using 4 x Bolts M8 x 16mm (p).
Place Spring Cover Cap (G) over Lower Pole (H) and twist clockwise
top of Base Plate (F) until the coil on the end of Lower Pole (H) sits
on top of the Base Plate (F).
A
F
G
H
p
p
p
p
A
C
oo
o
o

04
03 Assembly Instructions
Keycode: 42702672
Boxing Stand
Keycode: 42702672
Boxing Stand
Assembly Instructions
Step 3
Turn Base (A) over and then place Base Plug (D) into the hole
of the Base (A), cover Base Plug (D) with Base Plug Cover (E)
and secure them into place using Bolt M6 x 40mm (n).
Step 4
Loosen Height Adjustment Knob (J) on the Middle Pole (I) by twisting
counter-clockwise and slide Upper Pole (K) into the Middle Pole (I). Adjust
the length of the Upper Pole (K) to the desired height and secure it into
place. K
I
J
D
E
n
A
Step 5
Slide Foam Cover (L) over Upper Pole (K). Secure the
Punch Ball (M) to the Upper Pole (K) with Bolt M6 (q)
and Nut M6 (e). Adjust the position of the Foam Cover (L)
so it sits just beneath the Punch Ball (M).
Step 6
Place 2 x Base (A) on the ground and remove 2 x Base Cap (B).
Fill the Base (A) with either water or sand and then screw the
Base Caps (B) back onto the Base (A).
Step 7
Slide the part of step 5 into the part of
step 6 and screw the Middle Pole (I) into
the Spring Cover Cap (G), ensure all the
parts are connected firmly.
L
M
K
r
r
q
q
B
B
B
B
Finish
The concave surface is upward
Note:
Height is Adjustable.
There is Max Height
Marked on Upper Pole (K).
Black plastic ring