KMS AS-186 User manual

INSTRUCTION MANUAL
AIRBRUSH COMPRESSOR AS-186
Thanks for purchasing our airbrush compressor and please read this
Instruction Manual carefully and thoroughly before operating the tool
to get best performance.

2
、
1. Air tank: providing smooth air flow, zero pulse.
2. Air pressure gauge; air filter; pressure adjustable.
3. Piston type: Oil free & None air polluted.
4. It can start with air, continuous working, powerful.
5. Auto start and auto stop function.
6. Thermally protected inside.
7. Low noise: 47db.
8. Safety Protect devices for air tank.
Airbrush compressor AS-186, together with airbrush, can be widely used in
craftwork spraying, cosmetics, temporary tattoo, tanning, hobbies/models,
fingernail painting and so on. Moreover, it is also as the air source for
medical, environment protect, breed aquatics Industrial, food Industrial,
chemical industrial, laboratory and so on.
2. Application Field:
1. Features & Functions:

3
1. Type: Single Cylinder Piston Compressor With Air Tank
2. Power: 1/6 HP
3. Speed: 1450/1700 r.p.m
4. Air flow: 20~23L/min
5. Auto Stop Function: Stop at 4BAR(57PSI), Re-start at 3BAR(43PSI)
6. Working Pressure : 0~4 bar
7. Air tank: 3.0L
8. Weight: 5.2KG
9. Dimension: 330X135X320mm
Suitable for airbrush with nozzle range 0.2mm~1.0mm.
1. Usually the outlet thread size of our air compressor is 1/8'' BSP. If you need
the 1/4'' BSPor other NPT screw thread, you should get the other adapters
to fix the outlet, then you can connect with different air hoses.
2. The original air hose have rubber airproof inside and the user can make
the airtight by hand to and get good performance. If the air hose is not the
original, the air hose and air compressor may be not well airproof.
However, 100% airtight is only effective for auto stop function air
compressor. Seal thread tape can be used to prevent leakage, it could be
got in all the stores selling sanitary products.
3. Connect the air compressor, air hose and airbrush (or other air tools), plug
4. Operation directory:
3. Specification:

4
into the mains supply, turn on the switch, then the air compressor will start
work. The press gauge will show the max pressure, and you can adjust the
working pressure by adjusting the pressure adjustor.
4. Checking the air leakage. Please do not use any air tools firstly before the
compressor reach the maximum pressure and observe whether it will be
auto-stop. If the compressor will not be auto-stop, please turn off the
switch, then check the index on pressure gauge, if it is very steady, means
the airtight is very good; While the index decline down quickly, it means
there has the air leakage in the area of the connection. Please check and
make it airtight, because any small leakage will affect the performance of
the compressor. (It may lead to frequently auto-stop and auto-start).
5. The difference between maximum pressure and working pressure. The
compressor' maximum pressure is the highest pressure it can build up,
and the working pressure is the one shown on the pressure gauge When
the connected airbrush is opened. Apparently, the working pressure is
the constant pressure the compressor can maintain during airbrushing.
The level of this working pressure depends on the nozzle diameter of the
airbrush to which it is connected; the larger the nozzle diameter, the
bigger the amount of air which can escape and the lower the compressor's
working pressure.
6. The compressors have tank which can store compress air before delivery
to the airbrush (or other air tools). The tank is very useful, and the

5
advantages is folloings:
a. Tanks provide a reservoir of pressurized air that you can draw from while
you're spraying.
b. You can draw air at a regulated pressure from the tank instead of the
average pressure of the piston cylinders.
c. Because you're drawing air from the tank, then can eliminate the tiny
pulsation in the air supply caused by the physical motion of pistons
pressurizing air.
d. The life of the compressor engine increases because it makes air as the
tank needs instead of always being on.
e. Tanks are great first line moisture traps.
1. The users should choose the right air compressor with suitable air flow and
pressure according to the actual work requirement.
2. Before connecting the compressor, check the main voltage compatible
with the electrical characteristics of the motor.
3. Please follow local electrical rules, and safety rules. And use the socket
which must be earthing.
4. Never leave the appliance exposed to dust, acids, vapors, explosive or
flammable gasses or atmospheric agents (rain, sun, fog, snow).
5. Notice:

6
5. The vacuum pump must be used in suitable environments (well-ventilated,
with an ambient temperature between +5℃and +40℃).
6. Never use the appliance in your bare feet or wet feet, as well as the wet
hand.
7. Never allow the children to touch the working machine or insert the stick
into the machine. It will cause the danger of scald or get an electric shock.
8. Do not open or tamper with any part of the compressor. Contact an
authorized Service Center.
9. Please release the water by opening the water drain valve under the tank
when the compressor does not use for long time. Store the compressor in
well ventilated and dry place.
10. In order to prolong the compressor life of the dual pressure ones, please
turn off the compressor if the user do not use the air for long time under
high pressure continuous working switch,
6.SPARE PART LIST

7
NO. Q TY
Q TY
PARTS
NO.
DESCRIPTTON
NO.
PARTS NO.
DESCRIPTTON
1 AS-186 #01
POWER SWITCH 1 25 AS186--#25
CYLINDER 1
2 AS186--#02
REAR COVER 1 26 AS186--#26 FRONT COVER 1
3 AS186--#03
WIRE 1 27 AS186--#27 RETAINER RING 1
4 AS186-#04
CONDENSER 1 28 AS186--#28 SCREW 4
5 AS186--#05
REAR BODY 1 29 AS186--#29 NUT 4
6 AS186--#06
SCREW 4 30 AS186--#30 PRESSURE REGULATOR 1
7 AS186--#07
STATIONARY MOTOR
1 31 AS186--#31 INLET VALVE ROB1 1
8 AS186--#08
BEARING 2 32 AS186--#32 INLET VALVE ROB2 1
9 AS186--#09
ROTARY MOTOR 1 33 AS186--#33 SCREW 4
10 AS186--#10
FRONT BODY 1 34 AS186--#34 RUBBER PAD 4
11 AS186--#11
O-RING 1 355 AS186--#35 NUT 4
12 AS186--#12
VALVE PLATE 1 36 AS186--#36 WATER-DRAIN VALVE 1
13 AS186--#13
CYLINDER BLOCK 1 37 AS186--#37 AIR TANK 1
14 AS186--#14
O-RING 1 38 AS186--#38 PRESSURE SWITCH 1
15 AS186--#15
O-RING 1 39 AS186--#39 AIR SPLITTER 1
16 AS186--#16
AIR-INLET CAP 1 40 AS186--#40 SAFETY VALVE 1
17 AS186--#17
SCREW 4 41 AS186--#41 O-RING 1
18 AS186--#18
HEAD CYLINDER 1 42 AS186--#42 COMPRESSION SCREW 1
19 AS188--#19
COUNTERWEIGHT 1 43 AS186--#43 HOSE 1
20 AS186-#20
BEARLING 1 44 AS186--#44 COMPRESSION SCREW 1
21 AS186--#21
LINK 1 45 AS186--#45 O-RING 1
22 AS186--#22
COMPRESSION RING 1 46 AS186--#46 OUTLET VALVE ROB2 1
23 AS186--#23
BLOCK 1 47 AS186--#47 OUT-LETS VALVE 1
24 AS186--#24
SCREW 1 48 AS186--#48

8
a.Power switch
b.Pressure regulator
c.Pressure gauge
d.Connection
e.Air filter
f.Power plug
、7Air compressor structure