Knape&Vogt MUV+ Series User manual

1
SPECIFICATIONS
Number: Full Extension Soft-Close Undermount Drawer Slide
Mounting: Side, for Frame or Frameless Construction
Height: 1-7/8"
Load Rating: 75-Pound Class
Finish: Zinc
Travel: Full Extension 14"–22", Partial 9"–12"
Sizes: 9", 10", 12", 14", 15", 16", 18", 20", 21", 22"
Packaged: Bulk (B): 6 Pairs per Carton. Lengths 14"-22".
Bulk (B): 4 Pairs per Carton. Lengths 9"-12".
Release Lever: MUV1D-RL: Up/Down Height Adjustment. 60 pairs per carton
MUV2D-RL: Up/Down Height, Side-to-Side Adjustment. 24 pairs per carton
MUV3D-RL: Up/Down Height, Side-to-Side, In/Out Adjustment. 12 pairs per carton
MUVRL INSET: Inset Adjuster (MUV2D-RL Add On). 12 pairs per carton
Rear Brackets: MUV-RBM: Metal Rear Bracket (for use on 14", 15", 16", 18", 20", 21", 22" Slides). 12 Brackets (Unhanded)
MUV-RBP: Plastic Rear Brackets (for use with 9", 10", 12" Slides). 8 Brackets (4 Right Hand, 4 Left Hand)
Fasteners: MUV-122: #7 x 5/8"Flat Head Screw – Slide
MUV-123: #6 x 1/2"Truss Head Screw – Front Release Levers and Rear Bracket
Install Jig: MUV-124
Material Thickness
For use with the following
material thicknesses:
5/8" [16mm]
9/16" [14mm]
1/2" [13mm]
Full Extension Soft-Close
Undermount Drawer Slide
DRAWER ASSEMBLY
Optimal Operation Guidelines for Drawer Width Based on Drawer Height:
Drawer Height up to 6": Max. Width = Slide Length + 10"
Drawer Height Greater than 6": Max. Width = Slide Length + 10"
or 28", whichever is less
Drawer Hight Greater than 8": Max. Width = Slide Length + 10"
or 24", whichever is less
Drawer Height Greater than 10": Max. Width = Slide Length + 10"
or 21", whichever is less
DRAWER HARDWARE INSTALLATION
15/16"
[24mm] 1-1/4"
[32mm]
1/4" [6.3mm]
Variable
Drawer Bottom
Drawer Bottom
Pre-drill front holes
at 15º angle.
Release Lever Adjustment (1/8")
(Vertical Adjustment)
Reference Page 6 for two critical drawer dimensions:
• Max. Drawer Bottom Recess
• Inside Drawer Width

RELEASE LEVERS
Full Extension Soft-Close Undermount Drawer Slide
2
Slide Cabinet
Depth
Min.
Interior Depth
Slide
Length
Drawer
Length
Travel
Length A B C
MUVAB 22 24" [610mm] 22-3/4" [578mm] 22.4" [569mm] 22" [559mm] 21.84" [554.7mm] 39/64" [15.5mm] 57/64" [22.5mm] 14-7/8" [378mm]
MUVAB 21 24" [610mm] 21-3/4" [553mm] 21.4" [544mm] 21" [533mm] 20.84" [529.3mm] 39/64" [15.5mm] 57/64" [22.5mm] 14-7/8" [378mm]
MUVAB 20 24" [610mm] 20-3/4" [527mm] 20.4" [518mm] 20" [508mm] 19.84" [503.9mm] 39/64" [15.5mm] 57/64" [22.5mm] 14-17/32" [369mm]
MUVAB 18 21" [533mm] 18-3/4" [479mm] 18.4" [467mm] 18" [457mm] 17.84" [453.1mm] 39/64" [15.5mm] 57/64" [22.5mm] 12-1/8" [308mm]
MUVAB 16 21" [533mm] 16-3/4" [425mm] 16.4" [417mm] 16" [406mm] 15.84" [402.3mm] 39/64" [15.5mm] 57/64" [22.5mm] 9-13/16" [249mm]
MUVAB 15 18" [457mm] 15-3/4" [403mm] 15.4" [391mm] 15" [381mm] 14.59" [370.6mm] 39/64" [15.5mm] 57/64" [22.5mm] 9-7/16" [240mm]
BOTTOM HOLE PATTERN
57/64" [22.5mm]
11/32"
[9mm]
11/32"
[9mm]
2-41/64"
[67mm]
39/64"
[15.5mm]
A
B
C
MUV1D-RL
HEIGHT ADJUSTMENT
Height
MUV2D-RL
HEIGHT & SIDE-TO-SIDE ADJUSTMENT
Height
Side-to-side
MUV3D-RL
HEIGHT & SIDE-TO-SIDE & IN/OUT ADJUSTMENT
Height
Side-to-side
In/Out
Part
Number Height Side-to-Side In/Out
MUV1D-RL + 1/8" [3mm] – –
MUV2D-RL + 1/8" [3mm] ± 1/16" [1.5mm] –
MUV3D-RL + 1/8" [3mm] ± 1/16" [1.5mm] + 3/32" [2.5mm]
IN/OUT ADJUSTMENT
MUVRL INSET (add onto MUV2D-RL)

FRAMELESS APPLICATIONS [WITH DECORATIVE FRONT]
Full Extension Soft-Close Undermount Drawer Slide
Slide Cabinet
Depth
Min.
Interior Depth
Slide
Length
Drawer
Length
Travel
Length A B C
Max.
Material
Thickness
Setback
MUVAB 22 24" [610mm] 22-3/4" [578mm] 22.4" [569mm] 22" [559mm]** 21.84" [554.7mm] 10-5/64" [256mm] 8-13/16" [224mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 21 24" [610mm] 21-3/4" [553mm] 21.4" [544mm] 21" [533mm]** 20.84" [529.3mm] 10-5/64" [256mm] 8-13/16" [224mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 20 21" [533mm] 20-3/4" [527mm] 20.4" [518mm] 20" [508mm]** 19.84" [503.9mm] 8-13/16" [224mm] 8-13/16" [224mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 18 21" [533mm] 18-3/4" [479mm] 18.4" [467mm] 18" [457mm]** 17.84" [453.1mm] 7-9/16" [192mm] 8-13/16" [224mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 16 18" [457mm] 16-3/4" [425mm] 16.4" [417mm] 16" [406mm]** 15.84" [402.3mm] 5-1/32" [128mm] 8-13/16" [224mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 15 18" [457mm] 15-3/4" [403mm] 15.4" [391mm] 15" [381mm]** 14.59" [370.6mm] 7-9/16" [192mm] 5-1/32" [128mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 14 15" [381mm] 14-3/4" [375mm] 14.4" [366mm] 14" [356mm]** 13.59" [345.2mm] 7-9/16" [192mm] 5-1/32" [128mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 12 15" [381mm] 12-3/4" [326mm] 12.4" [315mm] 12" [305mm]** 11.375" [288.93mm] 3-25/32" [96mm] 5-1/32" [128mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 10 12" [305mm] 10-5/8" [273mm] 10.15" [258mm] 10" [254mm]** 8.269" [210.03mm] 3-25/32" [96mm] 3-25/32" [96mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 9 12" [305mm] 10-5/8" [273mm] 10.15" [258mm] 9" [229mm]** 8.269" [210.03mm] 3-25/32" [96mm] 3-25/32" [96mm] 1-1/16" [27mm] 5/8" [16mm] 1/8" [3mm]
**If material is less than 1/2" drawer length must be sized shorter by same amount.
CabinetDepth
Interior Depth
Slide LengthSetback 1/8" [3mm]
Mount Position
1-7/16" [37mm]
1-7/16"
[37mm]
31/32"
[25mm]
Min. Top Gap
1/4" [6mm]
Max.Drawer Height=
Opening minus 13/16"
[20mm]
Bottom
Recess
1/2" [12.7mm]
Bottom Clearance
9/16" [14mm]
Drawer Gap
1/32" [1mm]
A B
C[seechart at bottom of page][see chart at bottom of page]
[see chart
at bottom
of page]
Drawer Length
1-1/4"
[32mm]
1-11/32"
[34mm]
9/32"
[7mm]
1-7/16"
[37mm]
31/32"
[25mm]
11/32" [9mm]
TYP.
SLIDE FRONT DETAILREAR SLIDE DETAIL
11/32"
[9mm]
TYP
1-15/32"
[37.5mm]
1-7/16"
[37mm] TYP. 31/32"
[25mm] TYP. 11/32"
[9mm]
3

4
*When using rear bracket at maximum extension.
Full Extension Soft-Close Undermount Drawer Slide
SLIDE FRONT DETAIL
1-1/4"
[32mm]
1-11/32"
[34mm]
9/32"
[7mm]
1-7/16"
[37mm]
31/32"
[25mm]
11/32" [9mm]
TYP.
REAR SLIDE DETAIL
11/32"
[9mm]
TYP
1-15/32"
[37.5mm]
1-7/16"
[37mm] TYP. 31/32"
[25mm] TYP. 11/32"
[9mm]
**If material is less than 1/2" drawer length must be sized shorter by same amount.
FACE-FRAME APPLICATIONS [WITH DECORATIVE FRONT]
Slide Cabinet Depth Slide Length Drawer
Length
Travel
Length
Max. Interior
Depth
Min. Interior
Depth
Max.
Material
Thickness
Setback
MUVAB 22 24" [610mm]* 22.4" [569mm] 22" [559mm]** 21.84" [554.7mm] 24-9/16" [624mm] 22-3/4" [581mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 21 24" [610mm] 21.4" [544mm] 21" [533mm]** 20.84" [529.3mm] 23-9/16" [598mm] 21-3/4" [555mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 20 24" [610mm]* 20.4" [518mm] 20" [508mm]** 19.84" [503.9mm] 22-9/16" [573mm] 20-3/4" [530mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 18 21" [533mm] 18.4" [467mm] 18" [457mm]** 17.84" [453.1mm] 20-9/16" [522mm] 18-3/4" [479mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 16 21" [533mm]* 16.4" [417mm] 16" [406mm]** 15.84" [402.3mm] 18-9/16" [472mm] 16-3/4" [429mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 15 18" [457mm] 15.4" [391mm] 15" [381mm]** 14.59" [370.6mm] 17-9/16" [446mm] 15-3/4" [403mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 14 18" [457mm]* 14.4" [366mm] 14" [356mm]** 13.59" [345.2mm] 16-9/16" [421mm] 14-3/4" [378mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 12 15" [381mm] 12.4" [315mm] 12" [305mm]** 11.375" [288.93mm] 13-3/4" [349mm] 12-3/4" [324mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 10 12" [305mm] 10.15" [258mm] 10" [254mm]** 8.269" [210.03mm] 11-3/4" [298mm] 10-5/8" [273mm] 5/8" [16mm] 1/8" [3mm]
MUVAB 9 12" [305mm] 10.15" [258mm] 9" [229mm]** 8.269" [210.03mm] 11-3/4" [298mm] 10-5/8" [273mm] 5/8" [16mm] 1/8" [3mm]
CabinetDepth
InteriorDepth
Slide Length
Bracket:
3/16" to 1-7/8" [5mm to 48mm]Slides 14" +
3/16" to 1-1/16" [5mm to 27mm] Slides 9" to12"
Setback 1/8" [3mm]
Mount Position
3/8" [10mm]
1-7/16"
[37mm]
31/32"
[25mm]
Min. Top Gap
1/4" [6mm]
Max. Drawer Height=
Opening minus 13/16"
[20mm]
Bottom
Recess
1/2" max.
[12.7mm]
Bottom Clearance
9/16" [14mm]
Drawer Gap
1/32" [1mm]
Drawer Length

Full Extension Soft-Close Undermount Drawer Slide
INSET APPLICATION
Variable Setback
FACE-FRAME
FRAMELESS
5
RUNNER SETBACK INSET APPLICATIONS
Min. = Slide Length + Setback + 1/4" [6mm]
Max. = Slide Length + Setback + 1-15/16" [49.2mm] Slides 14" +
Max. = Slide Length + Setback + 1-1/16" [27mm] Slides 9", 10", 12" +
DEPTH RANGE
Drawer Sub-Front
Thickness Slide Setback
1/2" [13mm] 11/16" [17.5mm] 13/16" [21mm] 15/16" [24mm]
5/8" [16mm] 13/16" [21mm] 15/16" [24mm] 1-1/16" [27mm]
3/4" [19mm] 15/16" [24mm] 1-1/16" [27mm] 1-3/16" [30mm]
5/8" [16mm] 3/4" [19mm] 7/8" [22mm]
Drawer Front Thickness
1D & 2D Release Lever
KV Part #: MUV1D-RL & MUV2D-RL
Charted setbacks set the face of the drawer front flush with face of cabinet
Calculation: Drawer Sub-Front Thickness + Drawer Front Thickness - 7/16" (11mm)
Drawer Sub-Front
Thickness Slide Setback
1/2" [13mm] 23/32" [18.5mm] 27/32" [22mm] 31/32" [25mm]
5/8" [16mm] 27/32" [22mm] 31/32" [25mm] 1-3/32" [28mm]
3/4" [19mm] 31/32" [25mm] 1-3/32" [28mm] 1-7/32" [31mm]
5/8" [16mm] 3/4" [19mm] 7/8" [22mm]
Drawer Front Thickness
3D Release Lever
KV Part #: MUV3D-RL
Charted setbacks set the face of the drawer front flush with face of cabinet
Calculation: Drawer Sub-Front Thickness + Drawer Front Thickness - 13/32" (10mm)
Min. = Slide Length + Setback + 1/4" [6mm]
MIN. INTERIOR DEPTH

DRAWER DIMENSIONS FOR FACE-FRAME AND FRAMELESS APPLICATIONS
6
Full Extension Soft-Close Undermount Drawer Slide
Cabinet Opening Width
Drawer Thickness Deduct from Opening Width
5/8" [16mm] 3/8" [10mm]
9/16" [14mm] 9/16" [14mm]
1/2" [13mm] 5/8" [16mm]
If material is less than 1/2",
use formula.*
Drawer Width Calculation
CRITICAL*
Inside Drawer Width
CRITICAL
Max. Drawer Bottom Recess: 12.7mm (1/2")
Min. Top Opening Clearance:
6.3mm (1/4")
Min.
Bottom
Opening
Clearance:
14mm
(9/16")
*Cabinet Opening Width Minus 42mm (1-5/8") = Inside Drawer Width
MuV+ Maximum Drawer Side Material Thickness: 16mm (5/8")
Use Muv+34 for Drawer Material from 16mm (5/8") to 19mm (3/4")
1/4" x 3/8" DEEP [6mm x 10mm DEEP]
9/32"
[7mm]
1/2" Max.
[12.7mm]
1-3/8" Min.
[35mm]
7/16"
[11mm]
DRAWER NOTCH & BORE
13/16"
[21mm]
1-1/4"
[32mm]
5/8"
[16mm]
5/8"
[16mm]
13/16"
[21mm]
1-1/4"
[32mm]
5/8"
[16mm]
5/8"
[16mm]
13/16"
[21mm]
MUV-RBP MUV-RBM
REAR BRACKETS
This warranty is given to the initial purchaser of new commercial products purchased from Knape & Vogt and its subsidiaries. The warranty covers defects in materials and
workmanship. The warranty does not apply to defects resulting from misuse, damage or abuse, normal wear and tear, accident, modification, improper installation or maintenance,
third party materials or damage during shipping. The warranty is not transferable and does not cover any subsequent purchasers of the products. During the Limited Lifetime
Warranty period, Knape & Vogt, will, at its option, repair or replace any defective product with a comparable product or component. This Limited Warranty is for repair or replacement
of defective products only and does not cover any other costs such as removal, installation, or other related expenses. For warranty service, please contact Knape & Vogt, 2700
Oak Industrial Drive, Grand Rapids, MI 49505, Attention: Customer Service. Information regarding the claimed defect and date of purchase of the product must be provided. Any
defective product must be returned postage or freight prepaid to Knape & Vogt. THIS LIMITED WARRANTY CONSTITUTES THE ONLY WARRANTY FOR THE PRODUCTS AND ALL
OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY DISCLAIMED. THIS LIMITED WARRANTY CONSTITUTES THE SOLE REMEDY AVAILABLE WITH
REGARD TO ANY DEFECTIVE PRODUCTS. KNAPE & VOGT SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL OR SPECIAL DAMAGES, INCLUDING WITHOUT
LIMITATION, LOSS OF TIME, INCONVENIENCE, OR LOST REVENUES OR PROFITS.
KNAPE & VOGT LIMITED LIFETIME WARRANTY FOR COMMERCIAL PRODUCTS
Copyright © 2017 Knape & Vogt, all rights reserved. Standard KV Commercial Warranty | Manufacturer reserves the right to change specifications without notice and without incurring responsibility for existing units. US Patent 8,430,567
2700 Oak Industrial Drive NE Grand Rapids, MI 49505
800.253.1561 • 616.459.3311 • fax [phone] www.kv.com
310480_REV-A_1018