KOCOM KDC-100 User manual

ASTRONICS BLDG., 260-7 Yumchang-Dong, Kangseo-
Gu,
Seoul 157-040, Korea
TEL:[phone] FAX:[phone]
http://www.astronics.co.kr E-mail:[email protected]
User s Manual
KDC-100
SpecificationsVarious Software Supply
Compose
Picture Draw 3.0
Windows98 or Windows2000 or Mac OS 8.5
Pentium 166MHZ 0r More, 32MB RAM
Image Sensor
Lens
AGC
S/N Ratio
Interface
Resolution
Picture Storage
Memory
White Balance
Power
Frame Rate
Dimension
Weight
VGA 1/3 CMOS 318,000 Pixels
Focal Length f=6.2mm
View Angle 53 , Aperture Fixed Iris, F:2.6
Normal lens position- 50Cm~Infinity
Macro lens position- 10Cm~15Cm
+18dB
57dB
USB Interface
Digital Camera 640 480(VGA),320 240(SIF)
PC Camera 640 480(VGA),352 288(CIF)
320 240(SIF),
176 144(QCIF),160 120(SQCIF)
High Resolution Mode (VGA,640 480) 26 frames
Low Resolution Mode (SIF,320 240) 107 frames
Internal SDRAM 64Mbit (8MB)
Auto White Balance
Digital Camera DC 4.5V(AAA 1.5V 3)
PC Camera Power By PC USB Port(5V)
VGA, QVGA, QCIF, SQCIF: 5~30fps
88mm(W) 54mm(H) 36mm(D)
66g (Exclude Battery)
Capture Dog 2.0
Image Editing
Making photo Sticker
Video Conferencing,
Chatting &
Transmitting by
USB Port
Image can be edited by image
editing software
Can make and edit photo
stickers by using Capture
Dog Software
ASTRONICS Viewer 1.0
Easy storage of Image
Easy Downloading image
from camera to PC and
storage of the image taken by
camera
Netmeeting 3.0
Video Conferencing by
PC camera

Dual
Digital Dual Folder CAMERA
Digital Dual Folder CAMERA
KDC-100
Index
Digital Dual Folder CAMERA
Precautions
What is in your box
Connection to PC
Looking at your KDC-100
Using the MODE Functions
Specifications
Using your KDC-100
How to install the driver and S/W
ASTRONICS Viewer 1.0
Capture Dog 2.0
Paint Draw 3.0
4
5
5
6
7
7
8
9
16
19
30

45
Dual USB PC CAMERA
USB Port
Do not leave the
camera in an
unstable place. It will
cause damage to the
camera when it falls.
This product contains
a very delicate
mechanism inside.
Do not give excessive
shock to the camera.
Do not leave the
camera exposed to the
hightemperature,such
as inside the vehicles
and under the direct
sunlight
Do not leave the
camera in humid
places and expose
rain. It could cause
damage to the product.
Do not disassemble.
It could cause
malfunction.
When Low Battery sign is flickering on the LCD, Wait about 30sec., mode changes
to Sleep . Replace the batteries with new ones within 2min. Then, the image stored
in camera can be kept securely. If not, image will be deleted from camera.
When use this camera as a PC camera, download the image from camera to PC first.
Then, the image stored in camera can be kept securely. If not, image will be deleted
from camera.
When take picture at dark place, to protect picture quality, if the camera is beeping
sound, taking picture is not possible.
For PC camera using, monitor screen may be blinked to let you know low illumination
at dark conditions. Use the camera at bright conditions.
At low resolution mode, even the camera takes picture from 107, LCD does not count
down the actual number and it displays 99. From 99, LCD displays actual number.
Do not use thinner or
benzene to clean the
camera. It could
cause damage to the
product or cause fire.
Precautions What is in your Box
Connection to PC
KDC-100
Camera
PC
Camera
USB port
CD
USB Cable
3xAAA 1.5V LR 6
Battery
Strap
Manual
Digital Dual Folder CAMERA Digital Dual Folder CAMERA

VGA 1/3 CMOS 318,000 Pixels
Focal Length f=6.2mm
View Angle 53 , Aperture Fixed Iris, F: 2.6
Normal lens position- 50Cm~Infinity
Macro lens position- 10Cm~15Cm
+18dB
57dB
USB Interface
Digital Camera 640 480(VGA), 320 240(SIF)
PC Camera 640 480(VGA), 352 288(CIF)
320 240(SIF),
176 144(QCIF), 160 120(SQCIF)
High Resolution Mode (VGA,640 480) 26 frames
Low Resolution Mode (SIF,320 240) 107 frames
Internal SDRAM 64M bit (8MB)
Auto White Balance
Digital Camera DC 4.5V(3xAAA 1.5V LR6 battery)
PC Camera Power By PC USB Port(5V)
VGA, QVGA, QCIF, SQCIF: 5~30fps
88mm(W) 54mm(H) 36mm(D)
66g (Exclude Battery)
View Finder
LED Lamp
LCD Window
Top
Front
Bottom
USB Port
Camera connection to PC to download the image
to PC and for Video conferencing.
Snap Shot button (Shutter)
Shutter for taking picture
Mode and Power button
The mode turns to “Sleep” in case of
no operations for 30sec.
For Mode selection, refer to page 7.
Camera Lens
Lens Positon: Normal- 50Cm~Infinity
Macro- 10Cm~15Cm
Looking at your KDC-100
Specifications
Digital Dual Folder CAMERA
6
Digital Dual Folder CAMERA
Using the MODE function
High resolution
640x480 mode
Low resolution
320x240 mode
To clear (delete) all
pictures stored in
camera, push the snap
shot button twice.
Self-Timer 10sec.
Continuous shooting mode lets you take picture
of those moments easily missed in sports
games, performances, and leisure activities.
The number can take picture
at high resolution mode
The number can take picture at
low resolution mode
(Even the camera takes picture
from 107, LCD does not count
down the actual number and it
displays 99. From 99, LCD
displays actual number)
-After select any mode, if no operation for 5sec, the mode turns to “26” or “99” you selected.
2266
9999
CCtt
SStt
CCLL
HHrr
LLrr
7
Image Sensor
Lens
AGC
S/N Ratio
Interface
Resolution
Picture Storage
Memory
White Balance
Power
Frame Rate
Dimension
Weight
System
Requirements
Windows 98 or
Windows 2000 or
Mac OS 8.5
Pentium 166MHZ 0r
More, 32MB RAM

How to install the driver and S/W
Digital Dual Folder CAMERA
9
Driver Installation for WIndows 98 and Windows ME
When the KDC-100 Driver CD is inserted,
Main screen will be displayed
automatically as shown in the picture.
1.1 Click “Driver Installation”
1.2 Click English , and OK for
language selection
Using your KDC-100
Digital Dual Folder CAMERA
8
Open the cover to
right and place the
batteries with correct
polarity and in order
Fold down the camera folder
and place it on the monitor as
shown in the picture
For Digital Camera
Tying up the strap Placing Batteries
For PC Camera
Open the camera folder and take
picture by viewing the object through
viewfinder as shown in the picture.

1.5 Click OK for restarting the PC
1.7 To Confirm proper installation of the driver
execute; Start>Setting>Control Panel>System.
Open Device Manager at menu bar, ASTRONICS
Dual Mode Camera message will be displayed for
an image device as shown in the picture.
In this step, connection the camera to PC USB Port is
necessary.
1.6 After restarting, connect the camera to PC USB port.
The camera is perceived as a new device by Windows 98, Plug and Play function
1.4 Click OK for completed installation
Digital Dual Folder CAMERA
10
Digital Dual Folder CAMERA
11
1.3 Click OK to begin driver installation..
Driver Installation for WIndows 2000
1. PC will find the new device by
Plug-and-Play in Windows2000 as
the Camera is plugged into PC.
Then click 'Next >' button.

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
12 13
4. Click 'Next' button.
5. If device driver was normally
installed in Windows2000, you
can see 'Imaging devices ->
ASTRONICS Dual Mode
Camera' by select 'Start ->
Setting -> Control Panel ->
System -> Device Manager'.
3. Check the “CD-ROM drivers”
to select the location of driver,
then click the 'Next>' button.
2. Select 'Search for a suitable
driver for my device(recommended)'.

ASTRONICS Dual Camera Photoshop plugin Driver for
MacOS(ver 8.5 or later)
Installation
Run the install file (x:\Mac\dc1099~1.hqx, x: your CD-ROM Drive), then an error message
appears in the desktop, but you can ignore this message. After then, an dialog box which
will make an arbitrary folder for MAC installer appears, and you can make arbitary folder
and click “Select Macintosh HD” button. This will make the MAC installer in the arbitrary
folder which you have just made.
Run the installer(dc1099Fmx) and this will place the following files in the correct folders
File Folder
STV0680 Camera extension Mac HD/System Folder/Extensions
STV0680 Camera control panel Mac HD/System Folder/Control Panels
STV0680 Capture plugin See NOTE
NOTE: The driver installation will ask you where you wish to install the plug-in.
It needs to be installed into the appropriate plug-ins folder for your Image editing
application, e.g. for Adobe Photoshop, it is PhotoShop->Plug-Ins->Import/Export folder.
Other applications will have a similar folder usually as a sub-folder of the main
application folder.
Instructions on use for Adobe Photoshop
- Run the installer and then copy the file “STV0680_Capture”
into the PhotoShop->Plug-Ins->Import/Export folder.
- Please note that the installer places “STV0680_Capture” on the desktop
and the user must still manually move it into the PhotoShop installation.
- Once the PhotoShop Plug-In is installed, it will appear as “USB Camera Capture...”
in the File->Import menu in PhotoShop.
Selecting this option will display the image upload dialog.
Instructions on Use (Plug’n’Save)for Quick time Movie Player
When the camera is plugged in, a dialog box will appear prompting
for base filename (defaults to date and time). The folder names
defaults to “STV0680 Camera Snapshots”on your hard disk, but
can be changed in the normal way. Images will be uploaded
into selected folder with filenames of basename<n>
Normal images will be in PICT format. Images captured
in continuous mode will be concatenated into a QuickTime movie
and compressed.
Digital Dual Folder CAMERA Digital Dual Folder CAMERA
14 15

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
16 17
Main Screen
Menu
File Menu
Save Image(S) Ctrl+S : Saves an image as other file name.
Save to Clipboard(S) Alt+S : Saves an image to Clipboard.
Exit (X) : Closes RealView 1.0 to return to windows.
Edit Menu
Undo(Z) Ctrl+Z : Reverses the last command or commands applied on images.
Redo : Cancels the last Undo.
USB Camera
Select Camera : Selects the type of picture camera, scanner, and digital camera.
- Twain driver served by hard ware company must be set up in advance.
Open Camera(O)Ctrl+O This command is used in reading the photo file and
new image wanted with picture camera, scanner, and digital camera.
Image Menu
Contrast/Brightness : Adjusts contrast and brightness of an image.
-Click Image - Contrast/Brightness.
-Watching the change of image, adjust contrast and brightness.
Color Adjust : Adjusts color of an image.
- Click Image - Color Adjust
- Watching the change of image, adjust color.
Convert to Gray : Changes the color of an image to grayscale.
- Click Image - Convert to Gray.
- Click Edit - Undo to return to the existing image.
Invert : Inverts R.G.B color's value of the image.
- Click Image - Invert.
- Click Edit - Undo to return to the existing image.
Convert to BGR: Changes image color of RGB to BGR .
- Click Image - Convert to BGR
- Click Edit - Undo to return to the existing image.
Flip Horizontal: Flips an image horizontally, along the vertical axis.
- Click Image - Flip Horizontal.
- Click Edit - Undo to return to the existing image.
Flip Vertical: Flips an image vertically, along the horizontal axis.
- Click Image - Flip Vertical.
- Click Edit - Undo to return to the existing image.
90 rotation Rotates an image in a 90-degree to clockwise.
- Click Image - 90 rotation
- Click Edit - Undo to return to the existing image.
ASTRONICS Viewer 1.0

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
18 19
Open Camera : This command is used in reading the photo file and
new image wanted with picture camera, scanner, and digital
camera.
Save Image : Saves an image as other file name
Save to Clipboard : Saves an image to Clipboard
Undo : Reverses the last command or commands applied on
images.
Redo : Cancels the last Undo.
Image Info : Shows the information about existing Image.
Function and Feature
Makes sticker easily by using picture camera for chatting
Sticker like Photo-frame shape
Blending photo and making sticker is possible by using alpha channel.
Supply many kinds of background images.
Save madden sticker as a file
Send sticker by e-mail in the middle of chatting and game promptly.
Apply sticker to homepage, report and etc.
Main Tollbar
Capture Dog 2.0
Main Screen
180 rotation Rotates an image in a 180-degree to clockwise.
- Click Image - 180 rotation
- Click Edit - Undo to return to the existing image.
270 rotation Rotates an image in a 270-degree to clockwise
- Click Image - 270 rotation
- Click Edit - Undo to return to the existing image.
Help Menu
RealView 1.0 Info(A) : Shows the information about RealView 1.0.
Image Info(A) : Shows the information about existing Image.

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
20 21
Installation & Getting Started with CaptureDog
1.Insert CD to main computer.
2. Click "setup.exe." from CaptureDog's folder.
3. Execute following step : Start window program CaptureDog
Menu
File
New : Makes new document.
Selecting Twain : Selects type of picture camera, digital camera, and scanner.
Print : Prints a finished sticker photo.
Quit : Quits CaptureDog and returns to windows.
Help : information of CaptureDog
Main Tool Bar
Open Camera : Connects ASTRONICS Dual Mode
Camera automatically to CaptureDog.
Sticker : Makes sticker.
Photograph: Makes a various standard size photos
automatically.
Print : Prints sticker
Save : Saves image
Mail : Sends image by E-mail
Quit : Quits CaptureDog and returns to windows
Setup Picture Camera
1. Setup picture camera by following manual which
is provided by picture camera manufacturer.
2. Start CaptureDog and click "Twain select"
command from File menu.
3. Select camera-type installed above step..

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
22 23
Making sticker photo After taking picture with ASTRONICS Dual Mode Camera or calling out saved
Image, follow next step.
Step 1. Adjust brightness and darkness of photo
Step 2. Select one of three effect menus. You can make an effect like watercolor
painting, spot remove and brown tone on saved photo.
Step 3. Click "Next" button. Then menu box will be appeared.
Step 4. Choose one of three menus and follow each step.
If you choose 1(Photo frame blend) effect menu, Dialog box will be appeared like
under.
Step1-1. Select background you want to blend.
Step1-2. Then click "next" button.
Brighten : Makes Image bright
Darken : Makes Image dark
Defualt : Returns to original Image.
Open Image : Calls out saved Image.
Save Image : Saves Image taken by ASTRONICS Dual Mode Camera.
Next : Goes to next step.
After taken picture with ASTRONICS Dual Mode Camera or Click Sticker
icon, above dialog box will be appeared.

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
24 25
If you choose 2(Border blend) effect menu, Dialog box will be appeared like under.
Open Dialogue Box
Control
Step3-2. Using above control buttons, Adjust background to fit for photo frame.
Step3-3. Using above control buttons, move location of blending photo to fit for
gackground.
Step3-4. Click "next" button.
If you choose 3(Background image blend) effect menu,
Dialog box will be appeared like under.
Step3-1. Click "Open background photo" button, select folder and file of
background photo saved.
Step2-1. Select color and background you want to blend.
Step2-2. Then click "next" button.

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
26 27
Step 5. Choose sticker size you want, then click "Making sticker" button.
Step 1. Choose photograph size you want at photograph size menu.
Step 2. Click Zoom “-, +” icon to adjust the frame.
Step 3. Click “Position” symbol icon to move the photograph at center.
Step 4. Click “Crop” icon to take the photograph with choosing part.
Step 1. Press the original photograph to return to former step.
Step 5. Click “OK”.
After taking photograph, Click “Photo” Icon. Above dialog box will be appeard.
Reference : If sicker is made, select one of next functions.
Frame
Making Photographs

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
28 29
Printing sticker using color printer
Step 1. Click "Print" icon, then print dialog box will be appeared
Save sticker as a file.
Send sticker by E-mail.
Step 1. Click "Save File" icon, then blending photo like under picture will be appeared
Step 2. Click "Agree" button, and input folder and file
name.
Step 1. Click "E-mail" icon, then Letter paper contained sticker photo will be appeared
Step 2. Input E-mail Address.
Step 3. Input title and contents of letter,
click "send" button
Reference : You can use saved sticker for homepage,
report and other document.
Step 2. Select the type of printer and the number of sheets.
Step 3. Insert glossy paper and click "OK" button.
Reference : Refer printer manual to print high solution work.
Caution : Print paper must be A4 size.

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
30 31
Paint Draw 3.0
Main Screen
Menu
Color Palette
Scroll bar
Brush Pattern
Main Tool
Drawing Tool
Image Edit Tool
Document
Paint Draw 3.0 Main Screen
New Document (Ctrl+N) Creates a new document.
Appoint the kind and direction of paper and click OK to make new document in
the screen. This document contains the size, sort, fold location, and working
condition of image. If the position of image fold is changed, image is not marked.
Open Document (Ctrl+O) Opens an existing document.
Save Document (Ctrl+S) Saves changes made to a document.
In the case of new document, the dialogue box that appoint file name is marked.
If the document is called out by Open Document, the current working condition
replaces the existing working condition.
Close Document Closes document.
Save as Document Creates a copy of a document with a new location or
name.
Open Image Setup When image is called out, appoint the basic size and the
times in which operates the Twain automatically.
Open Image (Shift+O) Opens an image file.
If there is not chosen figure, call out the image to the figure setuped from the
Open Image Setup.
In the case of making the figure and calling out the image.
- Click the button one of the figures
(rectangle, ellipse, asterisk, and flower shape).
- Draw the figure with mouse dragging
(drag the mouse holding down the left button).
- Click selecting tool icon and select the figure you want.
- After Clicking icon or File-Open Image, appoint the fold that contains image.
- After selecting file you want, click Open.
File(F) Menu

Save Image (Shift+S) Saves an image file
- Click selecting tool icon and select the figure you want.
- Click icon or File-Save Image and appoint the fold that contains image.
- Appoint the file names, and click Save
- If you want to appoint the file with different type, click File Type and select what
you want.
Print (Ctrl+P) Prints a current document.
-The size of printing paper must be fitted to the registered information of printing
dialogue box.
Reference : RIP Print Print current document with RIP(Raster Image Processor)
If you have been looking for fast print speed, accurate color reproduction and free
expression of your imagination, Paint Draw 3.0 is the answer. Paint Draw 3.0 is a
break-through RIP function that makes it to print directly what you draw in your head
out of your favorite graphics application. Paint Draw 3.0 is capable of printing your
work much faster than other RIPs. So, you will spend far less time for your print. With
Paint Draw 3.0, you just click the RIP Print button and Paint Draw 3.0 driver will print
your work immediately. It is so much easy to use. All you need to do is to click the
print button. You can print images come alive with near photographic quality with
RIP Print function. Paint Draw 3.0 also has the solution for the limit of printing size.
Paint Draw 3.0's RIP Print will catch, ridlalp and print the printing data widely.
Select Twain : Selects the type of picture camera, scanner, and digital camera.
- Twain driver served by hard ware company must be set up in advance.
Open Twain: This is used in reading the photo file and new image wanted
with picture camera, scanner, and digital camera.
Region capture Captures a certain area of the document.
- Select this menu, drag the mouse and set up an area you want.
- When image saving dialogue box is present, appoint the file name and fold
location.
- If you click cancel, the image is not saved in the file but presented only in
the screen.
- This is used in saving the object combined with not image file but rectangle,
ellipse, asterisk, flower shape, image and figure.
Screen capture Captures the window screen..
- If you select this menu, in some case image saving box appears, then
appoint the file name and the fold location.
- When cancel is clicked, the image is not saved in the file but presented only
in the screen.
- Do the capture after closing window and minimizing the screen not need in
advance.`
Exit (Ctrl+Q) Closes Paint Draw 3.0 to return to window
Digital Dual Folder CAMERA Digital Dual Folder CAMERA
32 33
Undo (Ctrl+Z) Reverses the last command or commands applied on
images.
Redo (Ctrl+Y) Cancels the last Undo.
Copy (Ctrl+C) Makes a copy of selected objects and saves it on the
clipboard.
- Click selecting tool icon and select the figure which is going to be
copied.
- Click icon or Edit-Copy and it is saved in the clipboard.
Edit(E) Menu

Digital Dual Folder CAMERA Digital Dual Folder CAMERA
34 35
Paste (Ctrl+V) Places objects saved on the clipboard into the active
document.
- Click icon or Edit-Paste.
- Click left button of mouse to the place pasted in.
- It is possible to paste the saved objects many times you want.
Image Copy With Select(Rectangle) and Select (Ellipse) icon, copy
the selected image. Appoint feather value. If the feather value is 1,
Feather effect does not rise.
- Select image with selecting tool icon..
- Click Select (Rectangle) icon, or Select (Ellipse).
- Appoint the area wanted to be copied with mouse dragging.
- The selected area is marked with dotted line, then you can change size and
location.
- Click Edit - Image Copy.
- If the window that appoints the feather value appears, enter the numerical
value properly.
- Click OK and it is saved on the clipboard.
Image Paste Attaches the saved image to the selected image with Image
Copy.
- Select the image pasted in with selecting tool icon.
- Click Edit-Image Paste.
- Click the left button of mouse to the location in which the selected image is
pasted
- If different location is appointed, the copied image is transferred.
Select All (Ctrl+A) Selects all objects in the active document.
- Click selecting tool icon and Edit-Select All.
Delete Deletes a selected object without saving it on the clipboard.
Group (Ctrl+G) Assemble two or more selected objects into one object.
When modifying groups, They act as a single unit.
- Appoint the vacant space and drag the mouse.
- All objects in the dotted area are selected.
- If you click Edit-Group, all selected objects are assembled into one object.
- With keeping the editing condition, to move and copy is possible.
Ungroup (Ctrl+U) Divides a group into individual objects.
- After Click selecting tool icon, select the group-appointed-objects.
- Click Edit-Ungroup and separated.
Duplication (Ctrl+D) Creates an exact copy of a selected object.
- With selecting tool icon, select one object or group-appointed-objects.
- Click Edit-Duplication.
- Appoint the width, length, space and numbers of dialogue box.
- Click OK and the point with rectangle to mouse point is marked.
- Click to fit for the size of document.
- If the image is out of range of document, It is not printed.

PRODUCT
MODEL
DATE PURCHASED
WARRANTY PERIOD
AGENCY
AGENCY ADDRESS
arranty
W
To receive after service, have the following ready when you
contact our branches
1. Name of the product
2. Model number of the product
3. The area of problem
4. Phone number and address at which you can be contacted.
ASTRONICS Warranties the original purchaser of this product
as follows.
1) This product is produced under strict quality control and
inspection procedures.
2) If this product breaks down during proper use as a result of
product defect, ASTRONICS will repair it within one year from \ date
of purchase free of charge.
3) The following cases will be subject to charge, even during
warranty period:
a. Breakdown during transport, or through careless treatment, by
consumer.
b. Breakdown cause by unauthorized repair, or system modification.
c. Breakdown caused by natural disaster or power disorder.
Warranty Card
Digital Dual Folder CAMERA Digital Dual Folder CAMERA
34 35
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment