User Guide
Eastman Kodak Company
Rochester, NY 14650 U.S.A.
© Eastman Kodak Company, 2011.
MC/MR/TM: Kodak, EasyShare. 4H8576
EasyShare
Camera / CD44
Install software, transfer pictures Tag your pictures
Use the flash
Use on-camera Help
Auto
Fill (Flash on)
Red Eye
O
4H8576
Press repeatedly to scroll through Flash
modes.
Share your pictures
Share pictures on your favorite social
networking sites.
IMPORTANT: To use the camera’s social
networking features, you must download
KODAK Software. See the Extended user guide.
6
Use other modes
Press the Mode button, then
to highlight a mode, then press
OK.
1
2
3
Tag pictures by Keyword,
Favorites, or People (face
recognition) to easily find
them later. See the Extended
user guide.
2
4
3
1Turn o the camera.
Connect the camera to a computer
connected to the Internet.
Turn on the camera.
After the software is installed, follow the
prompts to transfer pictures and videos.
1
2
Press the Menu button , highlight
a menu choice, then press the Info
button .
Scroll through a Help topic.
Smart Capture
Video
Scene
Program
All Date Favorites
Keywords
People
1
2
FCC compliance and advisory
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed or used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures: 1) reorient or relocate
the receiving antenna; 2) increase the separation between the
equipment and the receiver; 3) connect the equipment to an
outlet on a circuit dierent from that to which the receiver is
connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions. Any changes or
modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the
equipment. Where shielded interface cables have been provided
with the product or specified additional components or
accessories elsewhere defined to be used with the installation of
the product, they must be used in order to ensure compliance
with FCC regulation.
KODAK EASYSHARE Camera / CD44
