Kodak EasyShare TOUCH User manual

1
Table of contents
Getting started with your camera 2
Loading and charging the battery 2
Using an accessory MICROSD/SDHC Card 5
Turning on the camera 6
Setting the language, date/time 7
Taking a picture or video 8
Reviewing pictures/videos 12
Sharing pictures and videos 14
Installing software, transferring pictures 15
Product overview, features 17
Front, top views 17
Side, bottom views 18
Doing more with your camera 19
Using the flash 19
Using different modes 20
Using Program mode 21
Adding a date stamp to your next pictures 22
Using Film Effects 22
Solving camera problems 23
Appendix 24
urg_01281.book Page 1 Thursday, May 12, 2011 9:56 AM

2www.kodak.com/go/support
ENGLISH
1Getting started with your camera
Loading and charging the battery
Charge the battery See page 3
Purchase extra batteries www.kodak.com/go/accessories
1
2
All batteries lose power over time–even if they’re not being used.
For longer life, fully charge the battery prior to use.
Push aside
the battery
lock with
the battery.
urg_01281.book Page 2 Thursday, May 12, 2011 9:56 AM

www.kodak.com/go/M5370support 3
ENGLISH
If your camera includes an in-camera charger
Watch the battery level See page 13
Purchase extra batteries www.kodak.com/go/accessories
Maximize the number of pictures you can take–fully charge the battery
before using. (All rechargeable batteries lose power over time, even if
they’re not being used.) You can charge the Li-Ion battery whenever
necessary.
Turn off the camera.
1
Connect a KODAK Camera USB Cable, Micro B / 5-Pin and charger.
(Use only the cable included with this camera.)
2
Battery Charging light:
• Blinking: charging
• Steady On: finished charging
NOTE: You can use the camera while it’s plugged in.
Your charger and
plugs may differ.
urg_01281.book Page 3 Thursday, May 12, 2011 9:56 AM

4www.kodak.com/go/support
ENGLISH
If your camera includes an external battery charger
Charging via your computer’s USB port
1
Battery Charging light:
• Flashing green: charging
• Steady On green: finished charging
2
Your charger
and plugs may
differ.
1
2
Battery Charging light:
• Blinking: charging
• Steady On: finished charging
Turn off the camera.
Connect a KODAK Camera USB
Cable, Micro B / 5-Pin.
The camera charges when the computer is on and awake.
Turn off the computer’s hibernation, sleep, and
standby modes.
urg_01281.book Page 4 Thursday, May 12, 2011 9:56 AM

www.kodak.com/go/M5370support 5
ENGLISH
Using an accessory MICROSD/SDHC Card
Your camera has internal memory. We recommend purchasing a
MICROSD/SDHC Card (Class 4 or higher) to store more pictures/videos.
CAUTION:
A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card while the camera is on
may damage the pictures, the card, or the camera.
IMPORTANT: When you turn on the camera, it checks to see if a card is
inserted. If so, new pictures/videos are stored on the card. If no card is
inserted, new pictures/videos are stored in the camera’s internal memory.
If pictures/videos are detected in internal memory and a card is inserted, the
camera prompts you to move the pictures to the card (and erase those in
internal memory).
Purchase cards www.kodak.com/go/accessories
1
Turn off the camera, then
open the door.
2
Insert a card until it clicks.
3
Turn on the camera.
To remove a card, press
and release it.
Accessory
urg_01281.book Page 5 Thursday, May 12, 2011 9:56 AM

6www.kodak.com/go/support
ENGLISH
Turning on the camera
urg_01281.book Page 6 Thursday, May 12, 2011 9:56 AM

www.kodak.com/go/M5370support 7
ENGLISH
Setting the language, date/time
See the Extended user guide www.kodak.com/go/M5370manuals
See How-To videos www.kodak.com/go/M5370demos
Tap the Month, Date, or Year,
then tap
Tap Done.
Tap the Hour or Minutes, then
(Tap MDY to change the date
format.)
Drag or swipe
to view your language.
Set the language
Set the date/time
1
2
Tap your language.
1
2
to change it.
to change it.
3
urg_01281.book Page 7 Thursday, May 12, 2011 9:56 AM

8www.kodak.com/go/support
ENGLISH
Taking a picture or video
See all picture modes page 19
See the Extended user guide www.kodak.com/go/m5370manuals
When you turn on the camera for the first time, it’s in Smart Capture mode.
(After that, the camera “remembers” the last mode you used.)
1
Press the Shutter button halfway to focus and set exposure. Framing
marks indicate the camera focus area. (If the camera is not focusing
on the desired subject, release the Shutter button and recompose
the scene.)
Compose the picture.
2
3
Press the Shutter button completely down.
Take a video
To stop recording, press and release
it again.
Press and release the Record button.
1
2
urg_01281.book Page 8 Thursday, May 12, 2011 9:56 AM

www.kodak.com/go/M5370support 9
ENGLISH
Understanding the picture-taking icons
See the Extended user guide www.kodak.com/go/M5370manuals
See How-To videos www.kodak.com/go/M5370demos
Number of pictures/
video time remaining
Battery
level
Most recent
picture/video
Capture
mode
Flash
Self-timer/Burst
Touch Shutter
Icons vary by mode.
Exposure compensation
ISO
White balance
Sharpness
Settings
Color mode
Focus/Exposure zone
Swipe to see
these tools.
urg_01281.book Page 9 Thursday, May 12, 2011 9:56 AM

10 www.kodak.com/go/support
ENGLISH
Customizing your camera
Tap anywhere on the LCD to change between Clean view and Tools view.
Sometimes, you want to see everything available.
(Other times, you want everything out of your way!)
Clean
view
Tools
view
(Tools
vary by
camera
mode.)
Tools
urg_01281.book Page 10 Thursday, May 12, 2011 9:56 AM