Kogan Pawever Pets PPDBPETCLPA User manual

DUAL BLADE WIRELESS
PET CLIPPER
PPDBPETCLPA

• Do not repair or modify this product in any way.
• Do not immerse this product in water or other liquids.
• Do not use any corrosives or solvents to clean. To clean wipe surface with water
and a mild detergent.
• Avoid charging this device in temperatures above 40˚C or below 0˚C. Optimal
charging temperatures are between 5-40°C.
• It is normal for this product to become hot during use or whilst charging.
• Please fully charge the clippers before the first-time use.
• If the product is not being used for an extended period, please charge it once at
least every three months.
• Children should not play with this appliance.
• Practice holding the clippers in both the “off” and “on” position to determine your
most comfortable grip
• Acclimate your dog to the clippers. Your pet will benefit if they are desensitised to
sound of the clippers.
• Before use remove tangles and mats from pet’s coat.
• Ensure pet is completely dry before clipping.
• Prepare an environment that is safe and free from distractions.
• Never operate the product if it is not working properly or if it has been dropped,
damaged, or if it has come in contact with water. Cease use immediately and
contact Kogan.com for support.
• If your pet expresses distress or discomfort while using, cease use immediately.
Disposal of Battery
This product contains a rechargeable battery. Please take the battery out before discarding
it and dispose the battery in accordance with your local regulations.
SAFETY & WARNINGS

Clippers
3mm comb
6mm comb
9mm comb
12mm comb
Small blade
USB cable
Cleaning brush
Lubrication oil
User guide
COMPONENTS

OVERVIEW
Blade
Body
Power switch
Charging indicator
Charging plug
USB plug

Charging
1. Ensure the clipper’s power switch is in the OFF position.
2. Insert the charging plug into the port on the bottom of the clippers
3. Insert the USB plug into a USB adapter (mobile phone charger).
Charging Indicators
• During charging the “ ” indicator will blink. Once the battery is fully charged the
“full” indicator will illuminate.
• During use, both indicators will be off.
• When battery power is low the “” indicator will begin blinking quickly. Stop use
immediately and charge the clippers.
OPERATION
Outlet
OFF

Changing Combs
• To insert a comb onto the clippers, hold both sides of the comb with one hand,
ensure the blade is aligned with the slot on comb and push the clippers upwards.
• To re m ove a c o m b, disengage the locked part of the comb on both sides and pull
the clippers down, away from the comb (Figure 1).
Trimming your Pet’s Hair
1. Before using the clippers, ensure your pet is clean and dry. Dirt and grime may clog up
your clippers.
2. Brush out any knots or clumps of hair before you begin grooming.
3. To h e l p y o u r pet feel more comfortable, turn it on the clippers and let them get used to
the sound. Once your pet is comfortable, pick a spot to test the clippers.
Note: The first cuts may startle your pet, it is recommend having another person present to
help keep your pet calm during grooming.
4. Tr i m from the neck down:
• Start trimming from the top of your pet’s neck, slowly work your way down to the
shoulder area. Ensure you are following the natural direction that the fur lays.
• From the neck area, work down to your pet’s back and the sides of the body.
• To trim your pet’s legs, starting with the front legs, carefully hold the leg straight
and run the clippers down it. Once the front legs are done, move onto the hind legs.
Note: Take regular breaks to ensure that the blades do not overheat and your pet is
comfortable.
5. Leave sensitive spots for last. When trimming sensitive areas such as the face, take
care to ensure the clippers are not too close to your pet’s skin.
Figure 1

Before cleaning the blade, ensure clippers are switched off and unplugged.
1. Use your thumb to push the blade away from the clipper body and carefully remove
the blade.
2. Rinse off any fur between the upper blade and the lower blade. Do not take apart
the spring from the blade as this make damage the blade.
CLEANING & CARE
Lower blade
Upper blade
Spring

3. Use the supplied brush to remove any fur and debris from inside the clippers.
4. After cleaning the blade, add some lubricating oil between the upper and lower
blade.
5. Replace the blade onto the clipper body.The blade will ‘click’ back into place
when it has been inserted correctly.

Motor
Silver palladium alloy motor
Blade
Ceramic upper blade & stainless-steel lower blade
Charger requirements
USB adapter DC 5V (800mA and above)
Battery
Rechargeable lithium iron phosphate (1000mA)
Charging time
90 minutes
Operation time
120 minutes
This marking indicates that this appliance should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
SPECIFICATIONS

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com