Fri-Jado LDR 8 s User manual

LDR 8 s AC
EU EN (Original Instruction) 9124686 / 2306
USER MANUAL –EU version
LDR 8 s Auto Clean
LDR 8+8 s Auto Clean
WARNING
Read the instructions before using the machine.

LDR 8 s AC
EU 2 / 28
KEEP THIS USER MANUAL IN A SAFE PLACE FOR FUTURE USE
© 2023 Fri-Jado B.V., Oud Gastel, The Netherlands.
We advise you to contact your supplier for the guarantee period and conditions. Further we refer to
our General Terms and Conditions for Sales and Delivery that are available upon request.
The manufacturer does not accept any liability for damage or injury caused by failing to adhere to
these regulations or by not observing the usual caution or care in actions, operation, maintenance
or repair activities, even if not explicitly described in this manual.
As a result of constant commitment to improvement, it may happen that your unit deviates in detail
from what is described in this manual. For this reason, the given instructions are only a guideline for
the installation, use, maintenance and repair of the unit referred to in this manual. This manual has
been composed with the utmost care. The manufacturer shall, however, not be held responsible for
any mistakes in this manual nor for any consequences thereof. The user is allowed to copy this
manual for own use. Further all rights are reserved and nothing in this manual may be reproduced
and/or made public in any way.
Modifications:
In case of unauthorized modifications in or on the unit, every liability on the part of the manufacturer
becomes null and void.

LDR 8 s AC
EU 3 / 28
CONTENTS
1. INTRODUCTION..............................................................................................................5
1.1 General.............................................................................................................................5
1.2 Identification of the unit.....................................................................................................5
1.3 Pictograms and symbols...................................................................................................5
1.4 Safety instructions ............................................................................................................6
1.4.1 General........................................................................................................................6
1.4.2 Moving.........................................................................................................................7
1.5 Hygiene ............................................................................................................................7
1.6 Service and technical support...........................................................................................7
1.7 Storage.............................................................................................................................7
1.8 Disposal............................................................................................................................7
2. DESCRIPTION OF THE UNIT..........................................................................................8
2.1 Technical description........................................................................................................8
2.2 Intended use.....................................................................................................................8
2.3 Accessories......................................................................................................................8
3. INSTALLATION AND FIRST USE ...................................................................................9
3.1 Unpacking the unit............................................................................................................9
3.2 Installation and positioning..............................................................................................10
3.3 First use..........................................................................................................................11
3.3.1 Metal odor .................................................................................................................11
4. OPERATION AND USE ................................................................................................. 12
4.1 Control Panel..................................................................................................................12
4.2 Switching-on the unit.......................................................................................................13
4.3 Loading the unit..............................................................................................................13
4.3.1 Loading the rotisserie using V-shape spits (accessory) .............................................13
4.3.2 Loading the rotisserie using meat baskets (accessory)..............................................13
4.4 Grilling time.....................................................................................................................14
4.5 Taking out the products ..................................................................................................14
4.5.1 Taking out the V-shape spit (accessory)....................................................................15
4.5.2 Taking out the meat basket (accessory) ....................................................................15
4.6 Emptying grease container / grease caddy (optional)......................................................15
4.7 Switching-off the unit.......................................................................................................15
5. OPERATE ...................................................................................................................... 16
5.1 Starting a program..........................................................................................................16
5.2 Delayed starting time (optional) ......................................................................................16
5.3 Pre-heating.....................................................................................................................17
5.4 While cooking .................................................................................................................17
5.5 Adding extra time to the active program..........................................................................18
5.6 Interrupt a program.........................................................................................................18

LDR 8 s AC
EU 4 / 28
5.7 Reset alarm signal..........................................................................................................18
5.8 Power down....................................................................................................................18
6. SETTINGS...................................................................................................................... 19
6.1 General...........................................................................................................................19
6.2 Overview main parameters (Manager)............................................................................19
6.3 Service Menu..................................................................................................................19
7. PROGRAM..................................................................................................................... 20
7.1 General...........................................................................................................................20
7.2 Adding programs ............................................................................................................20
7.3 Edit programs.................................................................................................................20
7.4 Deleting programs ..........................................................................................................21
8. CLEANING AND MAINTENANCE.................................................................................22
8.1 Maintenance schedule....................................................................................................22
8.2 Daily Cleaning.................................................................................................................22
8.3 Weekly Cleaning.............................................................................................................24
8.4 Additional Manual Cleaning ............................................................................................24
9. MALFUNCTIONS AND SERVICE.................................................................................. 25
9.1 Replace the mains cord..................................................................................................25
10. TECHNICAL SPECIFICATIONS .................................................................................... 26

LDR 8 s AC
EU 5 / 28
1. INTRODUCTION
1.1 General
This manual is intended for the user of the LDR 8 s AC (Large Deli Rotisserie with cleaning feature).
The features and controls are being described, along with directions for the safest and most efficient
use, in order to guarantee a long life of the unit.
All pictograms, symbols and drawings in this manual apply to all LDR 8 s AC (EU) models.
1.2 Identification of the unit
The identification plate can be found on the outside of the machine, and contains the following data:
•Name of the supplier or the manufacturer
•Model
•Serial number
•Year of construction
•Voltage
•Frequency
•Power consumption
1.3 Pictograms and symbols
In this manual, the following pictograms and symbols are used:
WARNING
Possible physical injury or serious damage to the unit, if the instructions are not
carefully followed.
WARNING
Hazardous electrical voltage.
WARNING
Danger of getting injured by hot surfaces.
Suggestions and recommendations to simplify indicated actions.
Recycling symbol.
Direction of view symbol.

LDR 8 s AC
EU 6 / 28
1.4 Safety instructions
WARNING
The outside of the unit can be very hot.
WARNING
The maximum load on top of the unit may never exceed 50 kg.
WARNING
Risk of slippery floor: Spills may cause slippery surfaces, clean-up promptly.
WARNING
See installation instructions for grounding requirements.
WARNING
Always use the brakes on both front wheels:
1.4.1 General
The user of the unit will be fully responsible for abiding the locally prevailing safety- rules and
regulations.
The unit may be operated by qualified and authorized persons only. Anyone working on or with this
unit must be familiar with the contents of this manual and carefully follow all guidelines and
instructions. Never change the order of the steps to be performed. The management must instruct
the personnel on the basis of this manual and follow all instructions and regulations.
The pictograms, labels, instructions and warning signs attached to the unit, are part of the safety
measures. They may never be covered or removed, and have to be clearly visible during the entire
lifetime of the unit.
Immediately repair or replace damaged or illegible pictograms, warnings and instructions.
•To avoid short-circuiting, never clean the unit using a water hose. For cleaning instructions, see
section 8.
•During the grilling process, the unit can get very hot.
•When the door is opened the rotor stops and the heater is de-energized.
•The unit must be cleaned daily after use to ensure proper functioning and prevent fire hazard
(over heating).
•Stacked units - Do not process food (e.g. grilling) in one unit while auto-clean the other unit.
•The fat collecting container must be emptied regularly, to prevent overflow.
•This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved.
•Children shall not play with the appliance.
•Cleaning and user maintenance shall not be made by children without supervision.

LDR 8 s AC
EU 7 / 28
1.4.2 Moving
When moving the unit:
•Before moving the unit, first switch off the mains voltage by pulling the plug from the wall socket
and empty the fat collecting container. After that, cool-down the unit for at least ten minutes.
•Disconnect the water supply and drain.
•Stacked units (8+8): remove the fat collecting container.
•Units equipped with wheels are not suited to pass ledges or obstacles higher than 10 mm.
•When moving the unit, always push at the center of the unit. Never on top. Never at the bottom.
•Make sure that the wheels can move freely, so they never touch the gas hose and/or the power
lead.
1.5 Hygiene
The quality of a fresh product always depends on hygiene. Especially grilling products. With the
risk of salmonella contamination –especially for chicken products –you must make sure that grilled
products can never be mixed with uncooked products. Also contact between grilled products and
hands or tools that have been in contact with raw chicken meat, must be avoided at all times.
Hands or tools that have been in contact with raw chicken meat, must be cleaned thoroughly.
1.6 Service and technical support
The electrical schematics of your unit is included. In case of malfunctions you can contact your
dealer/service agent. Make sure you have the following data available:
•Model.
•Serial number.
This data can be found on the identification plate.
1.7 Storage
If the unit will not be used temporarily, and will be stored, follow these instructions:
•Disconnect power supply.
•Disconnect water supply.
•Clean the unit thoroughly.
•Wrap the unit from getting dusty.
•Store, when applicable, the unit in a dry, non-condensing environment.
1.8 Disposal
Dispose of the machine,any components or lubricants removed from it safely in accordance
with all local and national safety and environment requirements.

LDR 8 s AC
EU 8 / 28
2. Description of the unit
2.1 Technical description
The LDR 8 s AC uses natural convection and fans to provides an equally divided heat. The
hardened glass panes are equipped with a heat reflecting layer to keep the heat inside the grill. The
rotor is being wheeled by a maintenance-free motor and gearbox.
The plating of the unit is made of stainless steel. The product contact parts are made of stainless
steel AISI 304. The mains cable is provided with a plug.
The intelligent control keeps the temperature inside the unit fixed to level set by the operator. During
the entire process, the interior of the unit will be illuminated by halogen lamps. The intelligent control
has a capability to store many different programs. Each program can consist of a pre-heat and
additional steps in which the cooking time and temperature can be set. Communication through
USB / WIFI (optional) enables easy read-out, re-work and creating of programs via a PC. For this,
special software is available at Fri-Jado.
The unit has an automated cleaning program that cleanses the unit.
2.2 Intended use
The unit has been designed for grilling meat products and has a semi self-cleaning feature. Any
other use will not be regarded as intended use.
The manufacturer accepts no liability whatsoever for loss or injury caused by failing to strictly adhere
to the safety guidelines and instructions in this manual or due to carelessness during installation,
use, maintenance and repair of the unit referred to in this manual and any of its accessories.
Use the unit in perfect technical condition only.
2.3 Accessories
Your unit contains the following standard accessories:
•User manual.
For optional accessories contact [e-mail].

LDR 8 s AC
EU 9 / 28
3. INSTALLATION AND FIRST USE
All packing materials used for this unit are suited for recycling.
After unpacking, check the state of the unit. In case of damage, store the packing material, and
contact the transporter within fifteen working days after receiving the goods.
3.1 Unpacking the unit
(Single unit shown)
1. Unpack the unit as initiated on the unpacking instruction on the packaging.
2. Remove all remaining packing materials from the unit.
3. Remove the protective foil from the metal parts.
4. Take off the standard accessories.

LDR 8 s AC
EU 10 / 28
3.2 Installation and positioning
WARNING
Electric chock hazard. Grounding instructions: only connect the appliance to an
alternating current provided by a grounded wall socket, with a mains voltage in
accordance with the information indicated on the data plate of the appliance.
It is the consumer's responsibility to make sure the electrical installation conforms
with current national and local codes and wiring regulations.
Do not use a multi plug or extension cord. Such can result in fire, electrical shock, or
other personal injury.
Failure to follow these instructions can result in death or serious injury.
WARNING
Position the unit on a flat and horizontal surface. A temporally inclined plane of
maximum 5° is allowed.
Positioning:
•The user must have sufficient freedom of movement to properly operate the unit.
•The ambient temperature of the unit must be between 10°C and 30°C.
•Use proper lifting–and transport tools to move the unit.
•Place the unit, using a spirit level, flat on a solid surface. Mind the weight of the unit!
•The minimum free distance must be at least 100 mm.
•Keep a distance of at least 500 mm of free space above the unit.
•The products inside the unit must be clearly visible.
•Keep children away from the operating side of the unit.
•During grilling, the glass panes will get very hot. While positioning, keep the unit out of children’s
reach.
•Appliance is for use only with the specific legs or casters specified by the manufacturer.
•In case of a wheeled unit, the floor must be flat and leveled.
Installation:
•Secure the unit to the building structure using the tether bracket, refer to the installation manual.
•A water connection with an aerated valve with a ¾ inch thread connection, with a minimum
continuous flow rate of 15 liters / min, must be available near the unit. The water pressure must
be between 200 and 500 kPa (2 and 5 bar), preferably at least 300 kPa (3 bar). Refer to the
installation manual.
•Use the water hose supplied with the machine.
•An open drainage with a diameter of at least 40 mm must be available near the unit.
38 ½ IN (980 mm)

LDR 8 s AC
EU 11 / 28
•The unit has amains plug, andmust be connected to awall socket with the proper mains voltage.
The wall socket must be mounted by a certified electrician.
3.3 First use
When using the unit for the first time, clean the interior thoroughly with soap suds and heat up the
unit, see section 3.3.1. After commissioning discoloration of the cooking/grilling area can occur.
➊➋
➌
➍➎
3.3.1 Metal odor
To remove the metal odor that will appear at first use, the unit must be heated at the maximum
temperature (220°C) for at least half an hour.
1. Tap on the control screen and switch-on the unit.
2. Press to display the recipe screen.
3. Create a new program containing ONE step of maximum temperature and a duration
of at least 30 minutes (See section 7).
4. Select the new program and press to start (See section 5).
5. Allow the unit to fully execute the program.
The unit is now ready for use.

LDR 8 s AC
EU 12 / 28
4. OPERATION AND USE
4.1 Control Panel
Main Functions:
ON / OFF
Recipes
Wipe/clean touch screen (during countdown)
Clean Rotisserie
Home screen
Language
Help function
Tap or swipe to select function or activate additional screen
Step Back (when shown at upper left corner)

LDR 8 s AC
EU 13 / 28
4.2 Switching-on the unit
4.3 Loading the unit
When the door is open press the rotor button to activate the rotor. This allow easy loading or
unloading the products.
Whilst loading the unit, make sure that the rotor gets evenly loaded, so that the mass of the products
is evenly spread over de rotor, causing an equal balance. Do not allow empty meat forks, meat
baskets and chicken racks etc. in the grilling process.
4.3.1 Loading the rotisserie using V-shape spits (accessory)
If you are using V-shape spits act as follows:
•Place the skewer into the small outside hole on the rotor end plate on your left (as you face the
oven). The back of the V-shape spit should be pointing towards you.
•Fit the other end on the spit into the small corresponding holes on the rotor end plate on your
right (as you face the oven).
•Make sure the spit is level. If spit is not level make sure you are using the correct holes on the
rotor end plates.
4.3.2 Loading the rotisserie using meat baskets (accessory)
If you are using meat baskets, act as follows:

LDR 8 s AC
EU 14 / 28
•Whilst loading the unit with meat baskets, you must see to it, that the rotor gets evenly loaded,
so that the mass of the products is evenly spread over de rotor, causing an equal balance.
•Also see to it that no meat parts are sticking out of the baskets.
4.4 Grilling time
Grilling time depends on a number of factors:
•The ambient temperature and draft in the direct vicinity of the unit.
•Grilling temperature.
•The initial product temperature.
•The sort of meat (fat or lean) and with or without additives.
•The mass and shape of the product.
•The total amount of meat to be grilled in one grilling cycle.
•The end result.
Seasonings
The use of herbs and seasoning adds a specific twist to every meal. Using them right
is of great importance for the end result.
Guidelines for seasoning are:
•Preferably use the special chicken and meat seasonings of the supplier of the Fri-
Jado Grill. There are special seasoning mixtures for poultry, lamb, pork, large
meat, game and fish.
•Season the products to be grilled when dry.
•Season the products 90 minutes before grilling at the most to prevent the spices
from abstracting too much fluid from the meat.
•Do not add oil or grease while grilling.
•Season chicken on the inside and on the outside.
4.5 Taking out the products
WARNING
After the grilling, the interior of the unit and the glass panes are very hot.
Always use oven gloves when taking out the meat forks or other accessories.

LDR 8 s AC
EU 15 / 28
4.5.1 Taking out the V-shape spit (accessory)
When taking out the V-shape spit, it is best to act as follows:
1. Hold the V-shape spit firmly.
2. Slightly lift the end with the grips and shift the spit into the direction of its point.
This releases the spit.
3. Take the spit at its other end and take it out of the unit.
4. Remove the products from the spit.
Refer to the You-Tube movie: “Fri-Jado instruction for unloading chicken from a
rotisserie”.
4.5.2 Taking out the meat basket (accessory)
When taking out the meat basket from the LDR it is best to act as follows:
1. Slightly lift both ends of the meat basket.
2. Move the basket towards either the left or right hand side of the unit. This action
unlocks one end of the basket.
3. Move the unlocked end towards you and take out the basket from the unit.
Depending on the number of prepared products you may have to empty the baskets before they can
be removed.
4.6 Emptying grease container / grease caddy (optional)
WARNING
Check the grease container / caddy after each cooking process and empty already
when about half full to avoid overflowing.
WARNING
Grease will be hot immediately after cooking. Allow grease to cool or use extreme
caution and wear insulated gloves or safety mitts.
Single Units:
1. Disconnect power (caddy unit).
2. Take the grease container / caddy out.
3. Empty the container / caddy.
4. Place the (emptied) container / caddy back.
5. Connect power (caddy unit).
Stacked Units:
1. Take the grease drawer out.
2. Empty the drawer.
3. Place the (emptied) drawer back.
4.7 Switching-off the unit

LDR 8 s AC
EU 16 / 28
5. OPERATE
5.1 Starting a program
1. Press .
2. Select the required program. The total duration of the
program is shown in minutes next to the program name.
3. Press .
5.2 Delayed starting time (optional)
When the Delayed starting time function is activated
(at manager menu), a delayed starting time can be set.
1. Press the start delay icon .
2. Set the desired start time .
3. Press .
4. Select the required program.
5. Press .
6. Check start time. To confirm, press Continue.
7. Check: Change fat container. Press Continue when
executed.
8. Start delay time is set, program starts automatically at the
set time.

LDR 8 s AC
EU 17 / 28
5.3 Pre-heating
When the pre-heat function is activated (at manager menu), the
unit will start this function after selecting a program.
The screen will display the actual temperature (at the top).
Tap on the temperature box to see the set pre-heat temperature
(approx. 5 sec.).
When the set temperature is reached, the screen will show:
“Preheat done. Waiting for oven to be loaded” and a sound is
activated.
Load the rotisserie and press .
5.4 While cooking
WARNING
Opening the door during a grilling program or a cleaning program causes the unit to
stop and a warning is shown.
The unit will continue when the door is closed and pressed.
During the cooking process, the display shows a graph with the:
•planned trajectory (dark blue time line).
•processed trajectory (light blue time line).
•program steps (white stripe).
•and the set temperature (at the top).
In the center the graph,the program name, current function and
remaining time are shown.
In the bottom of the screen the process steps are given.
The screen will display the set temperature (at the top).
Tap on the temperature box to see the actual temperature
(approx. 5 sec.).
When ‘cook correction’ is switched-on the remaining time will
be automatically adjusted.

LDR 8 s AC
EU 18 / 28
5.5 Adding extra time to the active program
During the process extra time can be added (when activated in
the manager menu), by following the next steps:
1. Press .
2. Set extra time.
3. Select to save setting.
The display now shows the extra time, which will be added to
the last cooking step. The screen always shows the total
amount of extra time.
5.6 Interrupt a program
Interrupt temporarily:
1. Press .
2. Press to resume the program.
Interrupt definitely:
Press and press on Cancel Receipt.
5.7 Reset alarm signal
When an alarm signal has been set, a message will occur. Press to return to the main menu.
5.8 Power down
If no program is active and no key is touched within the next 60 minutes the unit will switch-off
automatically.
This option can be both switched-off or adjusted by a service engineer.

LDR 8 s AC
EU 19 / 28
6. SETTINGS
6.1 General
The settings of the unit can be changed by using the control panel.
There are three kinds of settings:
•Information
•Manager
•Service
Select to enter the setting menu.
The Manager and Service section are password protected.
Press to go one level back.
6.2 Overview main parameters (Manager)
Setting
Function and values
Change pin code
•0000 –9999
Setting the pin code for access to the Manager Menu. This
pin code can also be used for access to the Program Menu.
Toggle light
•ON –OFF
Temperature unit
•°C –°F
Volume unit
•Lit –Gal
UTC Time
•Setting the current time (UTC Time)
UTC Date
•Setting the current date (UTC Date)
Time zone offset
•-/- 12 –+/+ 12
Time format
•24h –AM/PM
Date format
•D/M/Y –M/D/Y
Start delay recipe
•ON –OFF
Alarm
•YES –NO
End-user recipe editing
•NO –YES
Ask weight
•NO –YES
Preheat mode
•NO –1x –continues
Preheat temp default
•20 –150°C (Factory setting at 150°C)
Eco function
•NO –YES
Audio settings
•1 –11
Audio factor
•1 –100
Test audio
Sound set
•Marimba –Bell –Beeper
Keyboard beep
•OFF –ON
Filter capacity
•50 –30000, or “0” for infinite
Lime filter
Remaining capacity of lime filter
Lime filter replaced
•NO –YES
Clean screen time
•10 –60 sec
Store Number
Reference cook
Recipes -> USB
Recipes <- USB
I+ recipes<-USB
Add recipes<-USB
6.3 Service Menu
The service menu contains settings for the security of the unit. This can only be accessed by the
supplier or a service technician.

LDR 8 s AC
EU 20 / 28
7. PROGRAM
7.1 General
Enter the recipe menu .
7.2 Adding programs
1. Select .
2. Enter the program name.
3. Enter the preheat step (or left blank).
4. Add cooking steps (swipe additional step at the bottom of
the screen upwards).
5. Once complete press .
Note: step name can be changed (press on it).
7.3 Edit programs
1. Select recipe to edit.
2. Select .
3. Make required alterations.
4. Once complete press .