Kogan KAMTGRNDPRB User manual

MULTIGRINDER PRO
KAMTGRNDPRB


Important Safeguards
Read all instructions in this user guide before use, and retain for future reference.
Before using the electrical appliance, the following basic precautions should always be
followed including the following:
1. Read all instructions.
2. Before use check that the voltage of wall outlet corresponds to the one shown on
the rating plate.
3. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or is dropped or damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or electrical or mechanical
adjustment.
4. If the supply cord is damaged it must be replaced by the manufacturer or a
authorized service agent or a qualified technician in order to avoid a hazard.
5. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
6. Do not let cord hang over edge of table or hot surface.
7. Do not immerse the motorized base in liquid, or place in dishwasher. Damage to
the unit will occur if submerged in liquid or filling the liquid into the container. Only
the top cover may be immersed.
8. Close supervision is necessary when your appliance is being used near children or
infirm persons.
9. Ensure fingers are kept well away from moving parts.
10. Do not remove cover until blade has completely stopped.
11. Do not attempt operation without the cover being in place.
12. The use of accessory not recommended by the manufacturer may cause injuries to
persons.
13. Check grinding chamber for presence of foreign objects before using.
14. This appliance is not intended for used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliances by a person responsible for their safety.
15. Children should be supervised to ensure that they do not play with the appliance.
16. Do not operate the appliance for other than its intended use.
17. This appliance is intended to be used in household and similar applications such
as:
a. staff kitchen areas in shops, offices and other working environments;
b. farmhouses;
c. by clients in hotels, motels and other residential type environments;
d. Bed and breakfast type environments.
18. Do not use outdoors.
SAFETY & WARNINGS

OVERVIEW
Bean Hopper Lid
Ground Coffee Container
Coffee Powder Outlet
Ground Coffee Container Holder
Strength Control Dial
Click-wheel
Bean Hopper Release Button
Body
Bean Hopper Holder
Ground Coffee Container Lid
Bean Hopper
Start/Stop Button
Grinding Head
Tab
Grinding Blade
Groove
Handle

Before the First Use
1. Carefully unpack your coffee grinder and remove all packing materials.
2. Be sure to remove any dust that may have accumulated during packaging.
3. To detach the Bean Hopper, press down the Bean Hopper Release Button while
simultaneously turning the Bean Hopper anticlockwise. This will allow you to
remove the Bean Hopper from the Bean Hopper Holder for cleaning.
4. Rinse the Bean Hopper, Bean Hopper Lid, Ground Coffee Container Lid and
Ground Coffee Container with water, then dry thoroughly.
Using Your Coffee Grinder
1. Place the coffee grinder on a flat surface.
2. To attach the Bean Hopper to the Bean Hopper Holder, align the Bean Hopper’s
tab with the Groove on the Bean Hopper Holder. Turn the Bean Hopper clockwise
until it is tightly locked into the Bean Hopper Holder.
To detach the Bean Hopper, press down the Bean Hopper Release Button while
simultaneously turning the Bean Hopper anticlockwise. This will allow you to
remove the Bean Hopper from the Bean Hopper Holder for cleaning.
GETTING STARTED
WARNING: Never fully immerse the body in water for cleaning, and do not fill
the bean hopper with water for cleaning.
OPERATION
Tab
Groove

3. Pour appropriate amount of coffee beans into the bean hopper, and close the lid.
The quantity of coffee beans shall not exceed 360g.
4. Put the ground coffee container (with lid in position) on the ground coffee container
holder. Ensure that the opening of the ground coffee container aligns with the
coffee powder outlet.
5. Turn the strength control dial to select your desired coffee strength. Turn it to the
right, the coffee strength will be increased while it will be decreased when turn the
strength control dial to the left.
6. The coffee-dispensing amount is determined by grinding time; you can turn the
click-wheel to select your desired grinding time. When select, the corresponding
indicator of your selected grinding time will light at 100% brightness. If you do not
want to adjust the grinding time, the appliance will work under the default grinding
time.
Illuminated
indicator
light
(from left
to right)
1
(default
setting)
23456
Grinding
time
5
minutes
10 mins 20 mins 30 mins 40 mins 50 mins
Note:
The bean hopper is equipped with micro switch so that it must be assembled in
correct before operating or the appliance will not work.
If it is not working, disassemble and re-assemble.
Note:
If you run the appliance without coffee beans, the appliance will stop working after
running for about 5 minutes. The appliance must rest for 30 minutes if it is operated
for 5 minutes continuously.
Note:
The first indicator light at 100% brightness means manual mode, please use another
container. Powder cup grinding 50 seconds at most the Coarse grind.

7. Connect the appliance with the power source, the first indicator (the default
grinding time Setting) lights at 100% brightness while the other indicators and the
indicator of Start/Stop button light at 50% brightness.
Select your desired grinding time by following the previous step and the table.
8. Press the Start/Stop button, the appliance starts to grind coffee bean under the
selected grinding time. The coffee powder dispenses from the coffee powder outlet.
The indicator of Start/Stop button keeps blinking during grinding process.
9. When desired grinding time has reached, the coffee grinder will stop working
automatically and go back to standby condition, at that time, the first indicator (the
default grinding time setting) lights at 100% brightness while the other indicators
and the indicator of Start/Stop button light at 50% brightness.
10. Unplug the appliance, remove the ground coffee container lid and pour out the
coffee ground directly.
Note:
The maximum amount of ground coffee container is 150g, make sure the coffee
ground shall not overflow.
Note:
If there is resistance while adjusting, the grind size should be adjusted while the motor
is running to prevent jamming.
Note:
The appliance will enter into the sleep state if no operation within 90 seconds after
plug in.
The appliance must rest for 30 minutes if it is operated for 5 minutes continuously.
And it is suggested to operate this appliance for less than 90s per time and minimum
90 seconds rest time must be maintained between continuous two cycles.
You can press Start/Stop button to make the appliance stop running at any time
during grinding process.

Grinding Tips
•The coarse ground coffee is generally used for percolators and coffee urns. Medium
ground coffee is used for drip coffee makers and steam-type espresso machines. A
fine ground coffee is used for espresso machines with an electric pump.
•For the freshest, most flavourful coffee, grind only enough for the pot you are
making. Coffee beans keep up to 2 months in the freezer in an airtight container
and can be ground while still frozen. Coffee grounds left in your grinder can
become stale and affect the flavour of freshly ground coffee. Be sure to clean
grinding chamber, blades and grinding wheel after each use.
•This grinder can only grind dry, brittle foods. It will not grind anything moist,
extremely hard, or gummy such as whole ginger, chocolate, sesame seeds or oily
spices such as cinnamon, cloves or nutmeg. Do not grind peanuts or grains such as
wheat, rice, barley, or dried corn. Attempting to grind any of these foods may
damage the unit. Never use it to chop ice cubes.
•Freshly ground peppercorns have a strong aroma and taste that may affect the
flavour of coffee beans ground afterward. You may want to purchase a separate
grinder if you plan to grind peppercorns.

CAUTION: Be sure to unplug this appliance and let it cool down completely before cleaning.
To protect against electrical shock, do not immerse cord, plug or body in water or liquid and
do not fill the bean hopper with water for cleaning. After each use, always make sure plug is
first removed from wall outlet.
•Wipe the body with wet cloth and then dry it completely.
•When do not using the appliance, store it in a dry and cool environment.
•To detach the Bean Hopper, press down the Bean Hopper Release Button while
simultaneously turning the Bean Hopper anticlockwise. This will allow you to remove
the Bean Hopper from the Bean Hopper Holder for cleaning.
•Rinse the Bean Hopper, Bean Hopper Lid, Ground Coffee Container Lid and Ground
Coffee Container with water, then dry thoroughly.
•Lift the handle of grinding wheel and then rotate it anticlockwise to remove the grinding
wheel, then clean the grinding blade with a brush and rinse the grinding wheel with
water and then dry it thoroughly.
•To replace the grinding wheel back in position, place the grinding wheel into the
grinding chamber by making the groove on the grinding wheel align with the tab on the
grinding chamber, and then rotate the grinding wheel clockwise until it is fixed well in
position.
CLEANING & CARE
Note:
Please operate carefully as the grinding wheel & grinding blade are sharp.
Grinding Head
Tab
Grinding Blade
Groove
Handle
WARNING: Never fully immerse the body in water for cleaning, and do not fill
the bean hopper with water for cleaning.

Disposal
This marking indicates that this appliance should not be disposed with other
house-hold wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources.

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Table of contents
Other Kogan Grinder manuals
Popular Grinder manuals by other brands

Sparky Group
Sparky Group FB 616 Original instructions

Makita
Makita GA003G instruction manual

Ingersoll-Rand
Ingersoll-Rand DG600G2 Product information

Metabo
Metabo BS 175 Original instructions

Protool
Protool RGP 150-16 E Original instruction / spare parts list

Desoutter
Desoutter K290B3CWY Original instructions

Hitachi
Hitachi G 10SD2 Handling instructions

Ryobi
Ryobi G-915 Owner's operating manual

PSI Woodworking Products
PSI Woodworking Products GRIND3X manual

Cornwell Tools
Cornwell Tools CAT555 Operating instructions, warning information, parts breakdown

Tecomec
Tecomec Midi Jolly-N owner's manual

EINHELL
EINHELL TE-AG 115/600 Original operating instructions