
1. Press the power button to turn on the headlamp.
2. While the headlamp is turned on, press the power button to cycle through the
following options:
Press once Light 1
Press twice Light 2
Press three times Both lights with high brightness
Press four times Both lights with low brightness
Press five times Both lights flashing (stroke effect)
Press six times Turn off
Charging Battery
1. Ensure the battery is inserted with the positive (+) end pointing to the side with the
power button.
2. On the side with the power button, unscrew the protective cap as illustrated below.
3. Insert the Micro USB cable (supplied) into the built-in charging port. Use only 5V
output devices for charging.
4. While charging, the power indicator emits red light. Once the battery is done
charging, the power indicator turns green.
5. Once the battery is fully charged, take the cable from the Micro USB port and
screw the protective cap back in thoroughly.
OPERATION