Kogan KAKAR2MICA User manual

Kogan Bluetooth
Karaoke System with Dual
Microphones
KKAKAR2MICA

Attention
Please handle this product with care and inspect it regularly to
ensure it is in good working order.
If the product, power supply cord or plug shows any signs of
damage: stop use, unplug and contact Kogan.com support.

1
SAFETY & WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION:
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead DANGEROUS VOLTAGE:
symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous voltage within
the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral ATTENTION:
triangle is intended to alert the user to the presence of
important operating, safety and maintenance (servicing)
instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the
manufacturer's instructions.
TABLE OF CONTENTS
AC CONNECTION ...............................................................................................................2
LOCATION OF CONTROLS...............................................................................................3
ASSEMBLY AND CONNECTIONS....................................................................................4
GENERAL OPERATION......................................................................................................5
SPECIFICATIONS AND COMPATIBILITY..............................................................................6
IMPORTANT SAFETY INSTRUCTIONS ..........................................................................1
SAFETY & WARNINGS ......................................................................................................1

2
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by
themanufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. WARNING: To reduce the risk of re or electric shock, do not expose this
apparatus to rain or moisture. Do not place objects filled with water, such as a
vase, on the apparatus.
16. The AC mains plug is used as the power disconnect device and it should
remain readily accessible and operable during intended use. In order to
completely disconnect the apparatus from power, the mains plug should be
completely removed from the AC outlet socket.
17. CAUTION: To reduce the risk of fire or explosion, do not expose batteries to
excessive heat such as sunshine, fire or other heat sources.
1) Warning: Avoid sharp corners on the lower stand bar – corners will cut.
2) Use product when fully assembled.
3) Use of product requires adult supervision for children under the age of 7.
AC CONNECTION
Use the unit’s AC polarized line cord for operation on AC power. Plug the AC
cord into any convenient 120V 60Hz household outlet.
NOTES:
. Remove the AC plug to disconnect when not in use.
. The AC plug supplied with the unit is polarized to help minimize the possibility
of electric shock.If the AC plug does not fit into a nonpolarized AC outlet, do
not file or cut the wide blade. It is the user's responsibility to have an electrician
replace the obsolete outlet.

3
LOCATION OF CONTROLS
FULL STAND
1. Microphone
2. Microphone ON/OFF Switch
(on Microphone Handle)
3. Microphone Holder
4. Multimedia Player Holder
5. Top Stand Bar
6. Height Adjustment Collar
7. Middle Stand Bar
8. Connector
9. Lower Stand Bar
10. Amp (base of unit)
11. Extra Microphone Holder
(Not Shown)
12. iPad Strap (Not Shown)
REAR PANEL OF AMP
1. Mic 2 In Jack
2. Guitar In Jack
3. AUX IN Jacks
4. Headphone Jack
1. MIC-1 In Jack
2. VOCAL Button
3. MIC-1 Volume Control
4. Power ON/OFF
Master VOLUME Control
5. LEFT Speaker
6. GUITAR Volume Control
7. MEDIA-IN Jack
8. SOURCE Button
9. AUX-IN/MEDIA-IN Indicator
10. BLUETOOTH Indicator
11. MIC-2 Volume Control
12. RIGHT Speaker
13. ECHO Control

4
1. Screw the Lower Stand Bar into the Amp and rotate
clockwise until tight.
2. Insert the Middle Stand Bar into the Lower Stand Bar and
tighten the Height Adjustment Collar.
3. Insert the Multimedia Player Holder onto the Top Stand Bar
and rotate clockwise until tight.
4. Insert the Microphone into the top Microphone Holder.
5. Insert the Microphone’s plug into the MIC 1 In Jack on the top of the
Amp.
6. Adjust the desired height of the stand using the Height Adjustment
Collar.
HEADPHONES JACKS
For private listening, connect 3.5mm (32 ohm) stereo headphones (not included)
to the Headphone Jack. The speakers are automatically disconnected when the
headphones plug is inserted in this jack.
ASSEMBLY AND CONNECTIONSASSEMBLY AND CONNECTIONS
CONNECTING A GUITAR
Insert a cable from the Audio Out jack on your Guitar to the Guitar In Jack on the
rear of this unit.
USING THE SECOND MICROPHONE (INCLUDED)
To use a second microphone (included), connect the Extra Microphone Holder to
the bar to hold the microphone, then insert the Microphone's Plug into the MIC-2
In Jack on the rear of the Amp.
CONNECTING AN EXTERNAL UNIT
You can connect an external unit to this unit, such as a CD/CD+G player, etc.
Simply connect an audio cable (not included) from the AUX-IN Jacks on this unit
to the external unit's AUX OUT jacks. This will allow you to broadcast the external
unit's sound through this unit's speakers. Make sure both units are turned on,
press the SOURCE Button repeatedly until the red indicator will stay lit to switch
to AUX IN mode. Adjust the volume using the Master Volume.
NOTES: Connecting the unit to an external audio source will allow you to
broadcast the external unit's sound through this unit's speakers.

5
. When connecting the external unit, refer to the owner's manual of the external
unit, as well as this manual.
. When connecting the external unit, make sure the power is OFF and both units
are unplugged before making any connections.
. Connect a CD+G player to utilize the VOCAL Button, see later in this guide.
USING A MEDIA PLAYER
1. Insert your multimedia player into the Multimedia Player Holder.
2. Connect the Line In cable from the Line Out of your multimedia player to the
MEDIA In Jack on the top of the Amp. Connecting the multimedia player will
allow you to hear its sound through
this unit's speakers.
3. After connection, press the SOURCE Button repeatedly until the red indicator
flashing to switch to MEDIA-IN mode.
NOTES: If using a tablet, make sure to strap the tablet in using the supplied strap.
The MEDIA In Jack should be used if multiple source inputs are used.
STAND ADJUSTMENT
To lower or raise the Top Stand bar, simple rotate the Height Adjustment Collar
counter-clockwise to loosen and then raise or lower the Top Stand Bar. Rotate
the Height Adjustment Collar clockwise to tighten.
GENERAL OPERATION
1. Make any desired connections as shown previously. Rotate the master volume
knob clockwise until a click sound heard to turn the unit on.
2. Turn microphone's ON/OFF Switch to the ON position. Repeat for microphone
2, if desired.
3. Adjust MIC-1 Volume Control as desired.
4. If using a second microphone, adjust MIC-2 Volume Control as desired.
5. Rotate the ECHO Control clockwise to increase the echo or counterclockwise
to decrease the echo.
6. Press the VOCAL Button to the “in” position to activate this feature. When the
Vocal Auto Feature is activated, the vocals on a multiplex recording are muted.
7. Turn on the external unit or multimedia player and sing or talk into the
microphone(s) and you will hear both the external unit/multimedia player and
the microphone.
8. If a Guitar is connected, set the desired volume using the GUITAR Volume
Control.

6
9. Adjust the Master Volume Control as desired; this will control the overall
volume of all connected units/microphones.
10. Rotate the master volume knob counterclockwise until turning the unit off.
MICROPHONE FEEDBACK:
“Feedback” is a howling or screeching sound that occurs when the microphone
(s) comes too close to the speaker. To avoid microphone feedback, keep the
microphone(s) as far away from the speaker as the microphone cable(s) will
allow. If you must bring the microphone(s) close to the speaker, such as when
you are changing a disc or adjusting one of the other controls on the front of the
unit, set the microphone(s) On/Off switch(es) to the OFF position.
BLUETOOTH OPERATION:
1. Turn on the unit as previous procedure.
2. Press the SOURCE button repeatedly until the Bluetooth indicator will light up
and blink
3. Activate the external Bluetooth device to search the unit identified as
“ ”, select it and PAIR. KAKAR2MICA
4. After successful connection, the indicator will stay lit and a tone will be heard.
Play music as usual.
NOTES: The unit can be automatically paired and connected with the paired
device when it is switched to Bluetooth mode.
GENERAL:
Power Source ........................................................................................................ 240V, 50Hz
Speaker ............................................................................................................................. 8 Ohms
Dimensions ..................................................................................59 inches (when extended)
................................................................................................. 47 inches (when not extended)
Output Power.................................................................................................................... 2 x 5W
Power Consumption .......................................................................................................... 25W
Weight .. ............................................................................................7.4 lbs (assembled unit)
SPECIFICATIONS AND COMPATIBILITY
User manual and specifications are subject to change without notice. For the latest version of
your user manual, please visit https://www.kogan.com/usermanuals/