Kogan NBLTSMLFSLA User manual

SOLAR POWERED 2-IN-1
FLICKERING LANTERN
LED LIGHT
(2-PACK)
NBLTSMLFSLA

1 Lantern (x2)
2 Post (x2)
3 Garden stake (x2)
Hanging handle
(optional)
Garden stake
(optional) Solar panel
COMPONENTS
OVERVIEW

How These Solar Lights Work
•During the day, the solar panel converts sunlight into electricity and recharges the
battery.
•At night, the lights turn on automatically from the electricity stored during the day.
•The number of lighting hours depend on geographical location, weather condition and
exposure time under the sun light. Under normal conditions, if the light is charged in full
sunlight for about 8 hours every day, the light should last for at least 6 hours at night.
•In winter, the working hours may reduce due to the reduced sunlight.
Choosing a Location
•Choose an outdoor location in full direct sunlight where the solar panel can receive at
least 6 hours of light each day.
•Shaded locations will not allow the batteries to charge fully and will reduce the hours of
night-time lighting.
•The selected location should not be near other night-time light sources such as porch
light or streetlight, as they may cause the solar light to turn off automatically.
First-time Use
The solar lights should be charged in full sunlight for 24 hours with the switch in the “ON”
position. This allows the rechargeable battery to reach its maximum capacity.
Using Solar Lights
1. Press the power switch from “OFF” into the “ON” position so that the battery can
be charged. (“OFF” position means the solar lights are completely turned off and
can’t be charged.)
2. Then choose a suitable location and the light will automatically turn on at dusk
and off at dawn.
OPERATION

Replacing the Batteries
It is suggested to replace the rechargeable batteries every 12 months to ensure better
performance. 1 pc of Ni-Mh or Ni-Cd rechargeable battery is needed.
1. On the bottom of the solar panel you will find the battery house.
2. Press the manual switch to the “OFF” position.
3. Screw open the battery case, remove the old battery and replace it with a new Ni-
Mh or Ni-Cd rechargeable battery.
4. Return the switch to “ON” position.
MAINTENANCE
Note:
The battery is spring-loaded; press in the opposite side of the spring and lift out
the battery. Reverse this process when installing a new battery.
Screw
Switch
Battery
Battery housing
Unscrew to
release

This marking indicates that this appliance should not be disposed with
other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
DISPOSAL

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com