Kogan KGNFHDLED55VAA User manual

KGN&,>55VA
USER MANUAL

The screen and cabinet get warm when the TV
is in use. This is not a malfunction.In case of
smoke, strange noise or strange smell from the
unit:
· Turn off the power switch immediately;
· Disconnect the power plug from the power
outlet;
· Contact your dealer or service centre. Never attempt to make repairs
yourself because this could be dangerous.
High Voltage
Do not open
Risk of electronic shock, do not open.
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
CAUTION
Important Safety Instructions
Important Safety Instructions and Maintenance
Never push objects of any kind into the set
through the cabinet slots as they may touch
dangerous voltage points or short-circuit parts that
could result in a fire or electric shock. Never spill
liquid of any kind on the set. Use special caution
in households where children are present. The apparatus is not suitable for children
under 3-year to operate.
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
1
If the following problems occur:
Turn off the TV set and unplug the AC power cord
immediately if any of the following problems occur.
Ask your dealer or service centre to have it checked
by qualified service personnel
When:
- AC power cord is damaged.
- Poor fitting of AC power outlet.
- TV set is damaged by being dropped, hit or having something thrown at it.
- Any liquid or solid object falls through openings in the cabinet.
Do not overload wall outlets, extension cords or
adaptors beyond their capacity, this can result in
fire or electrical shock.
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at plug end, adaptors
and the point where they exit from the appliance. The mains plug is used as the
disconnect device. It shall remain readily accessible and should not be obstructed
during intended use. Make sure to plug the power cord in until it is firmly inserted.
When removing the power cord, make sure to hold the power plug when pulling the
plug from the outlet, do not pull the plug out by the wire. NEVER touch the plug or
power cord with wet hands. To disconnect the apparatus from the mains power, the
plug must be pulled out from the mains socket, therefore make sure the mains plug
is always easily accessible.

Important Safety Instructions and Maintenance
Important Safety Instructions
When not in use
If you will not be using the TV set for several days, the
TV set should be disconnected from the AC mains for
environmental and safety reasons. As the TV set is not
disconnected from the AC power when the TV is turned
off at the standby switch, pull the plug from the AC power
outlet to disconnect the TV completely. However, some
TV sets may have features that require the TV set to be
left in standby to function correctly. In the case of lightning,
unplug the TV set from the outlet immediately. Never
touch the antenna wire during lightning.
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.Ensuring the television is not
overhanging the edge of the supporting furniture.
Installation
The ventilation should not be impeded by covering the
ventilation opening with items, such as newspapers,
tablecloths, curtains, etc.
At least 10 cm space should be left around the
apparatus for sufficient ventilation.
The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Place the apparatus in such a position that the screen
is not exposed to direct sunlight. It is best to have soft
indirect lighting while watching and avoid
and reflection from the screen as
these may cause eye fatigue.
Keep the TV set away from any equipment emitting
electromagnetic radiation.
completely
dark environments
Do not pull the plug out by the wire;
Never touch the plug with wet hands.
Excessive from earphones and headphones
can cause hearing loss.
volume
2
To avoid the fire, no naked flame source,
such as lighted candles, should be placed on the
apparatus.
Do not push or scratch the front filter, or place any objects on top of the TV set. The
image may be uneven or the screen may be damaged.

Important Safety Instructions and Maintenance
Installation
Do not place this apparatus near water, for example,
near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or a swimming pool; and
the like;
When the TV being moved in from cold place, it needs
some right time for dew inside unit evaporating fully
before turn on the unit;
Cleaning and handling the screen
surface and cabinet. Disconnect
the unit from the AC outlet before
cleaning. To remove dust, wipe
gently with a soft, lint free cloth. If
required use a slightly damp cloth.
Do not place the set on an unstable cart, stand, table
or shelf. The set may fall, causing serious personal
injury as well as damage to the product. Use only with
the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. An
appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
3
Cleaning
Move
LED Screen
Although the LED screen is made with high precision technology and 99.99% or
more of the pixels are effective, black dots may appear or bright points of light (red,
blue or green) may appear constantly on the LED screen. This is a structural property
of the LED screen and is not a malfunction.
If the surface of the LED panel cracks, do not touch it until you have unplugged the
AC power cord. Otherwise electric shock may result.
Do not throw anything at the TV set. The LED panel may break from the impact and
cause serious injury.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display still images and partially still images on the LED panel for more
than 2 hours as it can cause screen image retention. This image retention is
also known as "screen burn". To avoid such image retention, reduce the
degree of brightness and contrast of the screen when displaying a still image.
Watching the LED TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and centre of the screen caused by the
difference of light emission on the screen. Playing a DVD or a game console
may cause a similar effect to the screen. Damages caused by the above effect
are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain
period of time may produce partial after-images. To prevent this effect, reduce
the 'brightness' and 'contrast' when displaying still images.
MAINS PLUG
Wipe the mains plug with
a dry cloth at regular
intervals. Moisture and
dust may lead to fire or
electrical shock.
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure, fire or
electrical shock.)
Use care not to subject surfaces to bug repellent, solvent,
thinner, or other volatile substances as this may deteriorate the
surface and finish of the cabinet.
solvent thinner

Table of Contents
Important Information
4
Accessories
Introduction
Accessories-----------------------------------------------------------------------------------------------5
Features---------------------------------------------------------------------------------------------------6
Specifications--------------------------------------------------------------------------------------------7
Stand and wall-mounted instructions (option)---------------------------------------------------8
Overview of back panel-------------------------------------------------------------------------------10
Overview of front --------------------------------------------------------------------------------------11
Overview of remote control--------------------------------------------------------------------------12
Teletext ---------------------------------------------------------------------------------------------------14
Installing Batteries in the Remote Control--------------------------------------------------------16
External Connection--------------------------------------------------------------------------------------16
Antenna connection------------------------------------------------------------------------------------16
Connecting VCR ---------------------------------------------------------------------------------------17
Connecting a Camcorder-----------------------------------------------------------------------------18
Connecting a DVD Player/Set-Top Box ----------------------------------------------------------19
Connecting a DVD Player/Set-Top Box with DVI ----------------------------------------------20
Connecting DVD Player/Set-Top Box with HDMI ----------------------------------------------21
Connecting Digital Audio System-------------------------------------------------------------------22
Connecting Amplifier/DVD Home Theater -------------------------------------------------------22
Connecting PC -----------------------------------------------------------------------------------------23
Supporting signals ----------------------------------------------------------------------------------------23
Basic operation
Turn the TV on and off--------------------------------------------------------------------------------24
Menu operation ----------------------------------------------------------------------------------------25
Menu system introduction-----------------------------------------------------------------------------27
Picture----------------------------------------------------------------------------------------------------27
Sound-----------------------------------------------------------------------------------------------------29
Channel--------------------------------------------------------------------------------------------------31
Time-------------------------------------------------------------------------------------------------------33
Option-----------------------------------------------------------------------------------------------------35
Function--------------------------------------------------------------------------------------------------36
PVR-------------------------------------------------------------------------------------------------------37
Digital Media Player -------------------------------------------------------------------------------------40
Reference
Troubleshooting -------------------------------------------------------------------------------------------44
Picture defects and the reason-----------------------------------------------------------------------46
Keep small accessories out of reach of children so they are not mistakenly swallowed.

Please make sure the following items are included with your LED/LCD TV. If any items are
missing, contact your dealer.
Accessories
5
Remote Control
Owner’s
Instructions
Batteryx2
CAUTION:
Do not dispose of batteries in a fire. Do not short
circuit, disassemble or overheat the batteries.
Danger of explosion if battery is incorrectly
replaced, please observe polarity. Replace only
with the same or equivalent type.
OK/
REC LIST
MENU
1 2 3
456
789
0
INFO RECALL
FREEZE SLEEP
INPUT
POWER
FAV
CH.LIST
ASPECT
REC
SOUND
AUDIO LANG
VOL PROG
EXIT
HOLD SIZE
REVEAL CANCEL
PICTURE
MUTE
TEXT
SUBTITLE
TIME SUBCODE
GUIDE
DTV HDMI USB
INDEX
PgUp PgDn
RED GREEN YELLOW BLUE
Stand(1 Piece)
M8X10,4 Pieces-see rear panel of TV.
Mounting screws M4X10(5 Pieces)
Stand screws
AV cable(1to3) 2pieces

Features
Introduction
Input terminals used for external equipment connection
1 x ANTENNA jack 4 x HDMI inputs
1 x computer VGA/PC input 2 x USB inputs
1 x COMPONENT input 1 x AV output
3 x AV inputs 1 x SPDIF output
1 x Headphone output
l TV adopts 55” TFT display screen
l Zero X radiation complies to green environment protection requirement
l Connect to computer directly to realize TV/monitor combo.
l 16:9 wide screen
l Auto tuning and fine tuning
l HDMI input
l Component Compatible (480i; 480P; 576i; 576P; 720P; 1080i; 1080P)
l PC VGA
l English OSD
l Programmable sleep timer
l Wide range voltage input
l No-signal automatic power off
LED
6

Note:
- Design and specifications are subject to change without notice.
- Weight and Dimension shown are approximate.
Introduction
Specifications
7
Analog: Antenna:
46.25MHz-855.25MHz
Digital:5-12, 27-69
Digital: DVB-T
Analog: PAL: BG, DK, I,
SECAM: BG, D/K
PAL / NTSC / SECAM
KGNFHDLED55VAA
≥5 X2W
200W
o o
0 C-40 C
≤1W
~110-240V, 50/60Hz
75 ohms, unbalanced
55” Diagonal (max.)
Display size
LED panel resolution
Power supply
TV receive system
Frequency range
Video in
Antenna Input
Speaker output power
Power consumption
Standby consumption
Work Temperature
Model
Controller power DC 3V
(Two AAA size batteries)
1920X1080
1318.5X275X879.5mm
1318.5X30.5X817mm
28Kg
24Kg

Stand and wall-mounting instructions (optional)
How to assemble the stand
-Before attaching/detaching the stand, make sure to
turn off the TV.
-Before performing work, spread cushioning over the
base area to lay the LED TV on.
This will prevent it from being damaged.
Assembling instruction:
1) Fix the stand and the unit together with 5 screws.
Securing the TV Stand
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,
ensure your children do not hang over or destabilize the TV; doing so may cause the TV
to tip over, causing serious injuries or death. Follow all safety precautions
For added stability, install the anti-fall device for safety purposes,
as follows.
Preventing the LED TV from Toppling over off table
Mounting LED TV
1- Install a wood screw (4mm in diameter, not supplied) into the supporting furniture of
the LED TV.
2- Tie the wood screw and the stand with a strong cord (not supplied).
ALTERNATIVELY
To secure the TV to the wall:
1- Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the
screws have been firmly installed onto the wall.
- You may need additional material such as an anchor depending on the type of wall.
- Since the necessary clamps, screws, and string are not supplied, please purchase them
separately.
2 - Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
- Screws may not be supplied with the product. In this case, please purchase the screws
of the following specifications.
- Screw Specifications for a 46 ~ 55 Inch LED TV: M8 X L10
If you need to remove or assemble the stand please
read the following instructions.
2) To remove the stand, reverse instructions as above.
at the start of
this manual.
Screws(5-M4X10)
8

Stand and wall-mounting instructions (optional)
3 - Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
cable.
- Install the TV near to the wall so that it does not fall backwards.
- It is safe to connect the string so that the clamps fixed on the wall are equal to or
lower than the clamps fixed on the TV.
- Remove the cable before moving the TV.
4 - Verify all connections are properly secured. Periodically check connections for any
sign of fatigue for failure. If you have any doubt about the security of your connections,
contact a professional installer.
(optional)
Your LED TV is able to accommodate wall mounting with the use of a wall mount bracket
(not supplied with LED TV, please contact your local hardware store) and the mounting
holes on the back of the unit.
We recommend removing the TV stand prior to wall mounting the TV. Please
How to mount the LED TV on the wall
1.After detaching the stand, fasten 4 mounting screws (thread size M8X10 - not supplied!
Please contact your local hardware store) into the 4 screw holes on the rear cover, see
the figure below.
2.Fasten wall mounting bracket (Not supplied with LED TV, please contact your local
hardware store) with screws on the wall.
3.Carefully check for the strength before releasing the LED TV. NOTE: For more detailed
instructions please refer to your “after market” wall mounting instruction book.
. Thread hole size – M8 x 10 depth (TV mounting screw size) on the TV.
Wall mounting instructions
see previous
page for instructions on removing the stand.
9
Wall
Screw holes
400mm
400mm
400mm
400mm
400mm
400mm
278mm
467mm