Kogan KASLSTMTSTA User manual

PREMIUM RACING
SIMULATOR COCKPIT
MONITOR STAND
KASLSTMTSTA

• Closely follow the assembly instructions. Improper installation may result in
property damage or serious personal injury.
• A minimum of two people is recommended for this installation. Failure to use
safety gear and safe working methods may result in property damage, serious
injury or death.
• Be careful of sharp objects during assembly.
• Ensure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Use the mounting screws provided and do not over tighten them.
• This product contains small items that could be a choking hazard if swallowed.
Keep small items away from children.
• Do not allow children to play near this stand.
• This product is intended for indoor use only. Using this product outdoors could lead
to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist
prior to installation. If any parts are missing or faulty, contact help.Kogan.com for support.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at
least every three months).
SAFETY & WARNINGS
WARNING: Exceeding the maximum rated weights indicated may result
in instability causing possible property damage, serious injury or death.

Lay all components out on a clean floor and ensure all parts are included. If any pieces are
missing, check all packaging thoroughly, then contact help.Kogan.com for assistance.
Parts:
A(x2)
B
C
D
E(x4)
F(x2)
G(x4)
HAllen key
Mounting hardware:
M-A M5x14 (x4)
M-B M6x14 (x4)
M-C M6x30 (x4)
M-D M8x30 (x4)
M-E M8x50 (x4)
M-F (x4)
M-G (x8)
M-H (x8)
COMPONENTS

Step 1:
• Remove the existing fasteners and attach the arms (A) to the simulator cockpit.
• Secure the arms (A) in place using the previously removed fasteners.
Step 2: Optional holes are provided for different mounting heights.
ASSEMBLY

Step 3:
Using a combination of the supplied mounting hardware, securely attach the 2 mounting
brackets (C)(D) to the rear of your display.
Note: If you are unsure as to which hardware to use to safely mount your display, please
seek the advice of a professional tradesmen.

Step 4:

Step 5:
s

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com