Kogan KAACTCSACCA User manual

Elite Mounting Kit for Smartphone Action Cases
Quick Start Guide
KAACTCSACCA
With the Elite Mounting Kit, you can now take your smartphone to even more places. The kit allows you to
securely attach your smartphone Kogan Action Case to your helmet, surfboar , skateboar , snowboar ,
bicycle, motorbike an more so you never miss a moment.
Product Checklist
The following items are inclu e :
- Curve Surface Mount w/ 3M Sticker Pa (x4)
- Flat Surface Mount w/ 3M Sticker Pa
- Han lebar Mount
- A apter
- Screws
- Washers
- 1 x Allen Key
Getting Started
Using the Flat Surface Mount
1. Firstly, prepare the surface you wish to use with the Flat Surface Mount by wiping it clean an then
rying it thoroughly.
2. Take the Flat Surface 3M Sticker Pa an peel one si e. Place the now-reveale a hesive surface
upon the Flat Surface Mount in the correspon ing manner. (i.e. see above. The sticker an the
mount shoul align perfectly)
3. Next, peel the remaining si e of the flat surface 3M Sticker Pa , leaving the Flat Surface Mount with
an a hesive base. This will allow you to fasten the Flat Surface Mount to a surface of your choice.
4. Having secure the Flat Surface Mount, you are now rea y to attach your Smart Phone Action case.
Simply align the correspon ing segments of the objects an mesh the two objects together. Secure
the Smart Phone Action case to the Flat Surface Mount using the screws an tools provi e .
NOTE: You o not require the use of the A apter or Han lebar Mount to use the Flat Surface Mount with
your Smart Phone Action case.

Using the Curved Surface Mount
1. Firstly, prepare the surface you wish to use with the Curve Surface Mount by wiping it clean an
then rying it thoroughly.
2. Take a Curve Surface 3M Sticker Pa an peel one si e. Place the now-reveale a hesive surface
upon the Curve Surface Mount in the correspon ing manner. (i.e. see above. The sticker an the
mount shoul align perfectly)
3. Repeat the secon step, until each of the 3M Sticker Pa s are attache to the Curve Surface
Mount.
4. Now you will nee to reveal the unpeele a hesive surfaces of each of the 3M Sticker Pa s, leaving
the Curve Surface Mount with an a hesive base. This will allow you to fasten the Curve Surface
Mount to a curve surface of your choice.
5. Connect the A apter with the correspon ing port locate on top of the Curve Surface Mount. You
may nee to pinch the en s of the a apter to allow it to mesh with the mount. It shoul click into
place, fastene to the mount.
6. You are now rea y to attach your Smart Phone Action case. Simply align the correspon ing
segments of the case an the a aptor an mesh the two objects together. Secure the Smart Phone
Action case to the a apter using the screws an tools provi e .
Using the Handlebar Mount
1. Firstly, take the Han lebar Mount. Loosen the screws locking the rubber han lebar grip into place.
2. Once a certain aperture is available, you will be able to enclose the Han lebar Mount aroun a
han lebar. Hol the han lebar mount in place, return the screws to their original placement an
fasten.
3. Connect the A apter with the correspon ing port locate on the Han lebar Mount. You may nee to
pinch the en s of the a apter to allow it to mesh with the mount. It shoul click into place, secure to
the mount.
4. You are now rea y to attach your Smart Phone Action case. Simply align the correspon ing
segments of the case an the a aptor an mesh the two objects together. Secure the Smart Phone
Action case to the a apter using the screws an tools provi e .
Warnings / isclaimers
•Contents inclu e small parts an potential choking hazar s.
•Do not isassemble the pro uct.
•Please ensure all screws an parts are secure before use with Smartphone Action Case. In the
event of pro uct misuse, Kogan will not be responsible for amage or injury if applicable.
•If you believe this kit requires repair/maintenance, please refrain from attempting to repair it yourself.
Refer all servicing matters to qualifie personnel, or contact the Kogan Customer Support Team.