Step 1: Installation
Place the monitor on in a suitable position for video calling or recording on your computer
monitor, desktop or tripod.
To install on a computer monitor, place the webcam as shown and open the flexible
clip/base with your other hand. Mount the webcam, making sure the foot on the flexible
clip/base is flush with the back of your monitor.
The focus can be manually adjusted by rotating the ring on the webcam.
Step 2: Connection
Connect the webcam to an available computer USB port.
The webcam is plug-and-play: the Windows or Mac drivers will be loaded automatically.
Driver installation may take a few moments.
The webcam does not ship with video calling or recording software. To make a video call,
use your preferred video calling or recording application.
OPERATION
