Kohl's SOMOMA SQUARE 91SRRFR02 User manual

PART LIST QUANTITY
A
1 PC
B
1 PC
C
2 PC
D
2 PC
E
1 PC
F
1 PC
G
3 PC+1 PC
H
2 PC+1 PC
I
1 PC
WRENCH
SOMOMA SQUARE FIRE PIT ASSEMBLY INSTRUCTIONS
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
STYLE #:
PHILLIPS HEAD SCREWDRIVER NEEDED FOR ASSEMBLY, NOT INCLUDED.
91SRRFR02
FIGURE
DESCRIPTION
BASE
POKER
NUT
FOR MISSING OR INCORRECT PARTS/HARDWARE, CONTACT THE MANUFACTURER'S CUSTOMER SERVICE DIRECTLY AT
[email protected] OR 855-600-9294
REFER TO LAST PAGE FOR ADDITIONAL CUSTOMER SERVICE DETAILS.
SAVE THESE INSTRUCTIONS
BOLT
(M6 x 12MM)
SIDE PANEL WITH HANDLE
HANDLE
MESH COVER
SIDE PANEL
Page 1/5

STEP 3
A. PLACE ONE SIDE PANEL (D) FACE DOWN ON
A FLAT PROTECTED SURFACE.
PLACE BASE (E) AND ATTACHED SIDE PANELS
(C) ONTO SIDE PANEL (D) AND INSERT FLANGES
INTO SLOTS AND LOCK INTO PLACE.
91SRRFR02
STEP 1
A. ON A FLAT PROTECTED SURFACE, INSERT
HANDLE (A) INTO HOLE IN MESH COVER (B)
AND SECURE IT WITH NUT (G) USING WRENCH
(I). TIGHTEN COMPLETELY.
STYLE #:
STEP 2
A.PLACE SIDE PANEL (C) FACE DOWN ON A
FLAT PROTECTED SURFACE. INSERT BASE (E)
FLANGES INTO SLOTS AND LOCK INTO PLACE.
B. PLACE SECOND SIDE PANEL (C) UPSIDE
DOWN ON A FLAT PROTECTED SURFACE.
ROTATE FIRST SIDE PANEL AND ATTACHED
BASE AND INSERT BASE FLANGES INTO SLOTS
AND LOCK INTO PLACE.
ASSEMBLY INSTRUCTIONS (CONTINUED)
Page 2/5

STEP 4
A. ROTATE PARTIALLY ASSEMBLED UNIT ONTO
OPPOSITE SIDE ON A FLAT PROTECTED
SURFACE.
B. INSERT BOLT (H) THROUGH SIDE PANEL (D)
AND BASE (E). SECURE BOLT (H) WITH NUT (G).
DO NOT TIGHTEN COMPLETELY.
STEP 6
A. ROTATE PARTIALLY ASSEMBLED UNIT ONTO
OPPOSITE SIDE ON A FLAT PROTECTED
SURFACE.
B.INSERT BOLT (H) THROUGH SIDE PANEL (D)
AND BASE (E). SECURE BOLT (H) WITH NUT (G).
TIGHTEN ALL BOLTS COMPLETELY.
C. ROTATE FIRE PIT TO STAND UPRIGHT.
STEP 5
A. PLACE SECOND SIDE PANEL (D) FACE DOWN
ON A FLAT PROTECTED SURFACE.
B. PLACE PARTCIALLY ASSEMBLED UNIT ONTO
SECOND SIDE PANEL (D) AND INSERT FLANGES
INTO SLOTS AND MOVE INTO PLACE.
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
91SRRFR02
Page 3/5

ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
91SRRFR02
50 LBS
STEP 6
A.USE POKER (F) TO REMOVE AND REPLACE
MESH COVER (B) WHEN IN USE TO PREVENT
BURNING INJURY.
B. ASSEMBLY IS COMPLETE.
SURFACES WITH WARM WATER AND MILD DETERGENT, USING A NON-ABRASIVE SPONGE OR CLOTH. ALLOW TO
DRY THOROUGHLY.
WARRANTY
1 YEAR LIMITED WARRANTY
1. TO AVOID METAL CORROSION OR DAMAGE, DO NOT USE WATER TO EXTINGUISH FLAMES.
THE STORE. EMAIL YAYI TECH. AT [e-mail] OR CALL AT 855-600-9294 FROM 9:00 AM TO
5:00 EST FOR ASSISTANCE.
3. STORE CLEANED UNIT INSIDE A DRY LOCATION AT THE END OF SEASON.
INTENDED FOR OUTDOOR USE ONLY!
2. FOR END OF SEASON STORAGE, EMPTY THE COLD ASHES FROM THE BASIN AND WIPE THE INNER AND OUTER
** WE RECOMMEND THAT YOU SAVE THE WRENCH (I) AND PERIODICALLY TIGHTEN ALL BOLTS (AND SCREWS (IF
APPLICABLE)).
WEIGHT LIMIT
CARE AND CLEANING
FOR TECHNICAL ASSISTANCE ON ASSEMBLY OR REPLACEMENT PARTS, PLEASE DO NOT RETURN THIS PRODUCT TO
Page 4/5

ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
91SRRFR02
CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
CALIFORNIA PROPOSITION 65 WARNING
9. FUELS USED IN WOOD OR CHARCOAL BURNING APPLIANCES, AND THE PRODUCTS OF COMBUSTION OF SUCH
FUELS, CAN EXPOSE YOU TO CHEMICALS INCLUDING CARBON BLACK, WHICH IS KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER, AND CARBON MONOXIDE, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO
7. NEVER LEAVE BURING FIRE PIT UNATTENDED. ENSURE FIRE HAS BURNED OUT COMPLETELY AND PLACE THE MESH
COVER ON IT BEFORE LEAVING. KEEP A FIRE EXTINGUISHER HANDY.
WARNINGS
FOR OUTDOOR USE ONLY. FOLLOW ALL WARNINGS AND INSTRUCTIONS.
1. CHECK LOCAL FIRE REGULATIONS BEFORE USING.
2. THE FIRE PIT IS HOT! DO NOT ALLOW CHILDREN TO PLAY NEAR IT WHEN FIRE PIT IS IN USE. ALWAYS KEEP
8. DO NOT USE THIS FIRE PIT AS A COOKING APPLIANCE. IT IS NOT DESIGNED TO BE USED TO GRILL FOOD.
5. KEEP ALL COMBUSTIBLE ITEMS SUCH AS OUTDOOR FURNITURE, CLOTHING, PLANT, AND OTHER ITEMS AT LEAST
24’’ AWAY FROM THE FIRE PIT. NEVER USE THE FIRE PIT UNDER A COVERED TENT, GAZEBO, PATIO, OR PORCH.
FOR MORE INFORMATION GO TO: www.P65Warnings.ca.gov.
APPROPRIATE HEAT RESISTANT GLOVE OR PAD WHEN HANDLING.
4. THE FIRE PIT IS INTENDED TO BURN WOOD LOGS ONLY. DO NOT OVERLOAD LOGS OR BURN COAL, LEAVES, OR
EXTREME TEMPERATURES THAT WILL CAUSE INJURY TO AN UNPROTECTED HAND. PLEASE USE POKER OR AN
6. DO NOT USE IT ON WOODEN DECKS.
CHILDREN & PETS AWAY FROM THIS PRODUCT.
3. DO NOT TOUCH THE SURFACE OF MESH COVER, WOOD GRATE, AND FIRE BOWL WITH BARE HANDS WHILE IN
USE, AS IT MAY CAUSE BURNS. WHEN THE FIRE PIT IS IN USE, THE HANDLE ON THE MESH SCREEN CAN REACH
OTHER COMBUSTIBLE MATERIALS IN FIRE PIT.
Page 5/5