Komatsu Utility Avance WB91R-2 User manual

947033212 -10/00 - GB
• Foot pedal and hand control accelerator
• Key start/stop system with auxiliary position
• Maintenance free battery 120 A
• General purpose front bucket 1,03 m3
• Backhoe electro-hydraulic shifting lock
• Swing transport lock
• Electro hydraulic differential lock
• ROPS/FOPS, cab with heater and fan
• Traffic lights, rotating beacon
• Seat belt
• Tiltable bonnet
• Electro hydraulic slide frame release lock
• Front and rear working lights
• Air cleaner, dry type, radial seal with condition indicator
• Clothes hook
• Load sensing, variable displacement axial pump
• Indicators: air cleaner service, brake on, clock hour meter, engine
coolant, converter oil / temperature level, hydraulic oil level sight
gauge, engine oil pressure, coolant level sight gauge, hour meter,
revcounter, fuelgauge, engine water temperature
• Transmission neutrals switch
• Antifreeze -26°C
• 12V external electric plug
• Water separator
• Internal and external mirror
• Floor mat
• Front and rear windshield wipers
• Mechanical synchronised 4-speed gearbox
• Lockable internal storage compartment
• Air conditioning
• LSS (Load Stabilizer System)
• Audible reversing alarm
• Attachments, front loader:
- 4 in 1 bucket
- Flip-over forks on 4 in 1 bucket
- Hydraulic quick hitch
- Concrete mixing bucket
- Forks (for use with quick hitch)
- Angle blade
• Additional counterweights
• Vandalism protection
• Front mud guards
• Bolt-on cutting edge
• Prop shaft guard
• Auxiliary hydraulic valves, loader:
- auxiliary 3rd spool valve
with floating function for front attachment
- front auxiliary hydraulic pipework
• Auxiliary hydraulic lines backhoe
• Hammer pipework
• Hose burst check valves: loader/backhoe
• Telescopic dipper
• Offset boom
• Offset boom with telescopic dipper
• Return to dig
• Attachments backhoe:
- Quick hitch: Hydraulic / Mechanical
- Angle bucket
- Hydraulic hammer
• 160Ah, battery
• ROPS/FOPS canopy
OPTIONS
STANDARD EQUIPMENT
stp - www.stp.it
KOMATSU UTILITY EUROPE S.p.A.
Head Office
Via Atheste 4
35042 ESTE (Padova) Italy
Tel. [phone]
Fax [phone]

The Komatsu rigid backhoe loaders.
The only machine that combines style,
prestige and power.
More than 30 years of experience, and know-how,
the world's finest design tradition and state-of-the-
art Japanese technology have gone into the design
and manufacture of the new Komatsu “Utility”
range backhoe loaders.
BACKHOE LOADERS
91R-2
93R-2
NET
HORSEPOWER: WB91R-282,5 HP (SAE J 1349)
WB93R-297,8 HP (SAE J 1349)
OPERATIONAL
MASS: from 7500 to 8580 kg
BACKHOE LOADERS WB91R-2 / WB93R-2

Comfortable and simple to
operate.
With a Komatsu backhoe
loader, work is easy and
above all, enjoyable.
The performance and pro-
ductivity of a machine also
depend on the operator.
The person who works
many hours each day at the
controls of a machine is
well aware of this, and so is
Komatsu. This is why the
new backhoe loaders have
been designed for opera-
tors, in the interests of
businessmen and with total
respect for the environment
in which the machine oper-
ates.
Anyone who's not already a
Environmentally friendly.
Respect for the environ-
ment was one of the main
objectives that Komatsu
designers set themselves
in creating the new back-
hoe loaders.
The noise level of the new
backhoe loaders and their
exhaust emissions are
among the lowest possible
today, thanks to the use of
new generation Komatsu
engines.
skilled operator will very
soon become one with the
new generation of Komatsu
backhoe loaders.
The ergonomically
designed controls offer
ease of operation, using a
hydraulic system that
responds smoothly and
precisely.
The cab allows all-round
visibility and it is very quiet.
The ergonomically
designed seat is comfort-
able and fully adjustable.
Meanwhile, the machine
works quickly and power-
fully, reducing operator
fatigue and improving pro-
ductivity.
Machines built for operators with the environment
in mind.

valve block, the speed of
each movement is com-
pletely independent from
that of the others, and the
proportions between the
various movements remain
constant even when the
resistance load varies.
The new hydraulic system
ensures not just excellent
performance, but also
shorter cycle times and
thus greater productivity.
Tremendous hydraulic
power under your
complete control.
The new Komatsu backhoe
loaders are equipped with
the new exclusive hydraulic
"SyncroSystem"
The system consists of a
single variable flow
hydraulic pump and an
"intelligent" hydraulic circuit
that allows the machine to
adapt instantaneously to
the specific operation being
carried out. The CLSS
(Close Load Sensing
System) type circuit,
together with the variable
flow pump, means that only
the amount of oil strictly
necessary for
ensuring high operating
pressure is generated and
used.
This guarantees greater
efficiency, lower fuel con-
sumption and quiet opera-
tion. Even a relatively
unskilled operator can work
with unequalled precision
and control using all the
functions at the same time.
Thanks to the innovative
LIFD (Load Independent
Flow Divider) hydraulic
The exclusive "Syncro-
System" is also equipped
with two working mode
selections: "Std (normal)"
mode and "Power" mode.
The former is used for gen-
eral operations and preci-
sion work, whilst ensuring
maximum power but saving
fuel. The "Power" mode lets
the operator maximise the
hydraulic power to increase
the performance of the
machine and achieve
unequalled results.
Hoses and piping are
equipped with the special
ORFS connections normally
used for large size
machines. The O-ring seal
prevents oil leaks and it can
be easily replaced.
Maximum performance and perfect control
from the hydraulic “SyncroSystem”.
PUMP
LOADER
STEERING
BACKHOE
POWER
WORKING MODE
SELECTOR
THE PUMP
IS SET TO WORK
WITH THE MINIMUM
CHANGE OF
DISPLACEMENT

Excellent performance.
Komatsu rear excavator.
Power, strength and
efficiency.
The power and efficiency of
the hydraulic "Syncro-
System" are seen at their
best in the rear excavator.
Clearly it is robust and
offers high performance
owing to its newly
designed box section with
cast pivot points. The new
geometry results in excel-
lent dump heights and dig
depths, whilst ensuring
good soil retention and
excellent visibility.
A handy device, electro-
hydraulically controlled
from the operator's cabin,
locks the boom when
required. End damping on
the cylinders reduces
shock during operation.
The hydraulic piping is
located mostly inside the
structure for maximum pro-
tection, and incorporate
screw connections to
ensure easy replacement
without dismantling the
cylinders.
Locking of the backhoe
side shift on the support
chassis can be regulated,
while the stabilisers incor-
porate special devices to
compensate for wear.
The Komatsu rear excava-
tor offers not just perfor-
mance and robustness but
also extreme versatility.
Options include a telescop-
ic dipper, boom off-set sys-
tem and/or a combination
of both.
The machine can also be
equipped with a wide range
of attachments.
fort) during load and carry
operations or simply travel-
ling on the road.
As an option, it is available
the LSS (Load Stabiliser
System) acting on loader
lifting cylinders.
This system confers an
unbeatable stability of the
front loader (less vibra-
tions, less material spillage
and more operator’s com-
Front loader.
Exclusive new design
of the front loader.
The new design of the front
loader has tremendous
breakout and lift perfor-
mance. A dedicated switch
called “Speed-up” located
on the multifunction loader
control, increases the front
loader speed. The new
geometry reduces stress in
the loader arms improves
dump height and visibility, it
also ensures parallel lift and
incorporates few grease
points for easy mainte-
nance. These features,
together with the advanced
hydraulic system, make the
front loader even more ver-
satile: it can operate with
many different types of
equipment, including pallet
forks, 4 x 1 bucket, sweep-
er attachment and many
others.

Engine. Clean, powerful
and quiet.
The WB91R-2 and
WB93R-2 models are pow-
ered by new generation
Komatsu engines. Two
engines are available: the
82,5 HP naturally aspirated
and the 97,8 HP turbo
versions.
The large cubic displace-
ment of these engines, 4.4
litres, ensures high torque
and power, and above all
exceptional reliability.
Modern design and con-
struction technologies also
ensure minimum exhaust
emissions and low noise.
Maximum operating safety
is also guaranteed by the
excellent braking system.
Oil immersed multidisc
brakes can be indepen-
dently operated by either of
the two foot pedals.
Pressing both pedals
together automatically acti-
vate four wheel drive.
Transmission. Efficient,
reliable and safe.
The WB91R-2 and
WB93R-2 models are
equipped with a Power
Shuttle transmission with a
"Power shift" inverter.
They have four forward and
four reverse syncronised
gears with a top speed of
40 km/h. The "Power shut-
tle" transmission of the new
Komatsu backhoe loaders
is simple and reliable,
ensuring excellent cycle
times and remarkable trac-
tive effort. It helps max-
imise productivity, and pro-
tects your investments.
The robustness and effi-
ciency of the transmission
is increased by the use of
Heavy Duty type axles, with
planetary hub reductions
and electrohydraulically
operated diff-lock.

Steering angle.
Excellent manoeuvrability.
The hydraulic controlled
steering circuit is fed via a
load sensing priority valve,
this allows smooth and
precise driving. Even in
confined spaces, the new
Komatsu backhoe loaders
move in a safe and agile
way thanks to a high steer-
ing angle of 50°.
The double acting steering
cylinder is housed in a
protected position behind
the front axle.
Safety and reliability of the
system are guaranteed in
all conditions.

Modern and functional design.
Unmistakable style.
The new Utility range
Komatsu backhoe loaders
are designed like a tailor
made suit.
They fit specific customer
requirements like a glove
and they offer the best
solution to the working
applications.
All-round visibility, com-
pactness and maximum
accessibility for mainte-
nance.
No other backhoe loader
offers comparable visibility:
maximum glass surface,
extended front windscreen
in the upper part, a slim
even strong cab frame, a
sharply sloping front hood,
completely free from
obstacle (the exhaust pipe
is located in line with the
front upright) and the spe-
cially designed loader
arms.
mated with cutting, manu-
facturing and welding
operations carried out by
robots.
All machine components
are pre-painted to guaran-
tee the best protection,
and each machine pro-
duced is subject to careful
testing and pre-delivery
inspection.
Easy and rapid
maintenance. Maximum
operating economy.
Periodic maintenance of
the new Komatsu backhoe
loaders takes only a few
minutes, is very easy to
carry out and requires no
special tools.
The intervals for lubrication
and hydraulic and engine
oil changes have actually
been doubled, giving a
reduction in the owning and
operator costs.
Reliability and long life are
guaranteed.
For design, the most up to
date technologies are used,
from the 3D CAD/CAM sys-
tem to the use of finite ele-
ment calculation systems.
Before starting the produc-
tion of a new model, it is
subject to a long series of
severe experimental tests.
Production is highly auto-
ISO 9001
KOMATSU UTILITY EUROPE S.p.A.

SPECIFICATIONS
ENGINE
A new generation engine developed to comply with stricter
emissions controls.
Model (WB91R-2). . . . . . . . . . . . . . . . . Komatsu 4D106-1FA
(WB93R-2). . . . . . . . . . . . . . . . Komatsu S4D106-1FA
Type . . . . . . . . . . vertical, 4-cycle water-cooled diesel engine
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4412 cm3
Cyl. bore x stroke . . . . . . . . . . . . . . . . . . . . . . . . 106x125 mm
N° of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Compression ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17,5:1
Combustion . . . . . . . . . . . . . . . . . . . . . . . . direct injection (DI)
Aspiration (WB91R-2). . . . . . . . . . . . . . . . . natural aspiration
(WB93R-2). . . . . . . . . . . . . . . . . . . . turbocharged
Max power (WB91R-2). . . . . . . . . . . . . . . . . . . . . . . . 67,7 kW
(WB93R-2). . . . . . . . . . . . . . . . . . . . . . . . 84,2 kW
Rater power (WB91R-2):
(SAE J 1349) . . . . . . . . . . . . . . 61,5 kW / 82,5 HP / 2200 rpm
(80/1269/EC) . . . . . . . . . . . . . . . . . 61 kW / 82 HP / 2200 rpm
Max torque . . . . . . . . . . . . . . . . . . . . . . . 310 Nm - 1500 rpm
Rater power (WB93R-2):
(SAE J 1349) . . . . . . . . . . . . . . . . 73 kW / 97,8 HP / 2200 rpm
(80/1269/EC) . . . . . . . . . . . . . . . . 72 kW / 96,5 HP / 2200 rpm
Max torque . . . . . . . . . . . . . . . . . . . . . . . 375 Nm - 1500 rpm
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . radiator
Air filter . . . . . . . . . . . . . . . . . . . . dry filter with safety element
Starting system . . . . . . . . .electric motor with pre-heating air
system for cold climate
HYDRAULIC SYSTEM
SyncroSystem hydraulics allows the operator very precise
and simultaneous backhoe movements. This system is ener-
gy efficient and incorporates two different working modes:
maximum power and constant power. The advanced
hydraulic system includes also the function “speed up” to
increase the working speed of the front loader.
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Syncrosystem
Type . . . . . . . . . . . . . . . . .Close Load Sensing System CLSS
with working/power selector switch
Pumps type . . . . . .Variable displacement axial pistons type
Pumps control system . . . . . . . . .Load Sensing set to adjust
the hydraulic power
Distributor . . . . . . . . . . .LIFD “load indipendent flow divider”
modular type
Max delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 l/min
Work pressure (WB91R-2). . . . . . . . . . . . . . . . . . . . . 185 bar
(WB93R-2). . . . . . . . . . . . . . . . . . . . . 200 bar
FRAME
The re-designed frame is modular and has been developed
for computer based welding processes; every main element
is bolted directly to the frame to improve maintenance and to
reduce down time.
STEERING
The front steering wheels are controlled by a hydrostatic load
sensing with steering priority valve system.
Turning radius:
at the corner of the bucket . . . . . . . . . . . . . . . . . . . . 5450 mm
at outer edge of front tyre. . . . . . . . . . . . . . . . . . . . . 4000 mm
Turning radius (using brakes):
at the corner of the bucket . . . . . . . . . . . . . . . . . . . . 4950 mm
at outer edge of front tyre. . . . . . . . . . . . . . . . . . . . . 3400 mm
BRAKES
Oil immersed disc brakes are actuated by individual braking
on each rear wheel. Total integral braking on the 4 wheels is
activated by operating the two pedals at the same time.
Disc diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 mm
Total friction area . . . . . . . . . . . . . . . . . . . . . . . . . . . 2310 cm2
The parking or safety brake acts on the service brakes
through a hand operated lever.
AXLES
Heavy duty axles with planetary reduction gears in the wheel
hubs. Front axle total oscillation angle 20°. Differential total
lock in the rear axle controlled by electro-hydraulic system
with a switch on loader lever.
Max front strength (Dynamic) . . . . . . . . . . . . . . . . . 6300 daN
Max rear strength (Dynamic) . . . . . . . . . . . . . . . . . 12000 daN
TRANSMISSION
Switching between 4WD and 2WD is achieved through an
electro-hydraulic system. The transmission is operated
through a torque converter and a power shift reversing shut-
tle;
the mechanical 4-speed gearbox is synchronised.
Travel speed:
SPEED FORWARD REVERSE
1° 6,5 6,5
2° 12 12
3° 23 23
4° 40 40

WB91R-2 /WB93R-2
TYRES
Standard:
front . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,5/80 R18 - 10 PR
rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16,9 x 28 - 10 PR
Option:
front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365/70 R18
rear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18,4 x 26 - 12PR
CAB
New ROPS (ISO 9249, SAEJ1040) FOPS (ISO 3449, SAEJ
231) cab designed in order to offer the best visibility, ergono-
my, low noise and comfort. Two doors, full opening windows
with front and rear windscreen wipers. Internal lay out
includes full adjustable seat, fresh filtered air intake ventilation
and easy to read front and side dash board.
CAPACITIES
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,6 l
Cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 l
Diesel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 l
Hydraulic oil tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 l
Front axle oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,2 l
Rear axle oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18,5 l
Gearbox oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 l
WEIGHT (ISO 6016)
Operating standard machine weight . . . . . . . . . . . . 7500 kg
Total machine weight . . . . . . . . . . . . . . . . . . . . . . . . . 8580 kg
OPERATING WEIGHT INCREASE
4 IN BUCKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 kg
OFFSET BOOM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 kg
TELESCOPIC ARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 kg
PALLETS FORKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 kg
NOISE LEVEL
Dynamic test:
Sound power level . . . . . . . . . . . . . . . . LwA 103 dB(A) (cab)
Sound pressure level . . . . . . . . . . . . . . .LpA 777 dB(A) (cab)
The values are given according to the directive EC 89/514
and EC 95/27.
LOADER
The new design of the front loader allows a better tensile
strength distribution and the upkeep of movement parallelism
when lifting and lowering the bucket. Furthermore, thanks to
the linkage geometry the greasing points have been dramati-
cally reduced.
Standard bucket width . . . . . . . . . . . . . . . . . . . . . . . 2320 mm
Capacity (ISO 7546) . . . . . . . . . . . . . . . . . . . . . . . . . . 1,03 m3
STD bucket weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 kg
Lifting capacity at maximum height:
(WB91R-2). . . . . . . . . . . . . . . . . . . . . . . . 3538 daN (3610 kgf)
(WB93R-2). . . . . . . . . . . . . . . . . . . . . . . . 3820 daN (3900 kgf)
Lifting capacity at ground level (ISO 8313):
(WB91R-2). . . . . . . . . . . . . . . . . . . . . . . . 4700 daN (4785 kgf)
(WB93R-2). . . . . . . . . . . . . . . . . . . . . . . . 5195 daN (5300 kgf)
Breakout force (ISO 8313):
(WB91R-2). . . . . . . . . . . . . . . . . . . . . . . . 5963 daN (6085 kgf)
(WB93R-2). . . . . . . . . . . . . . . . . . . . . . . . 6383 daN (6500 kgf)
BACKHOE
The new boom has a rounded profile and a reinforced struc-
ture built with cast ends, allows 180° rotations, always main-
taining high rotation torque. Vertical outriggers with
adjustable wear device.
Bucket breakout force (ISO 6015):
(WB91R-2). . . . . . . . . . . . . . . . . . . . . . . . 5450 daN (5550 kgf)
(WB93R-2). . . . . . . . . . . . . . . . . . . . . . . . 5780 daN (5900 kgf)
Dipper digging force (ISO 6015):
(WB91R-2). . . . . . . . . . . . . . . . . . . . . . . . 3510 daN (3570 kgf)
(WB93R-2). . . . . . . . . . . . . . . . . . . . . . . . 3780 daN (3850 kgf)
ELECTRIC SYSTEM
Electric circuit with protected connections in all exposed
areas.
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Ah
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 A
Electric starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 kW

WB91R-2 /WB93R-2
SPECIFICATIONS
BA
BB
C
D
G
H
J
I
E
F
KL
MQ
NO
S
P
TR
Z
Y
X
U
V
W
DIMENSIONS
A. max. height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4220 mm
B. pin height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3400 mm
BB. forks loading height. . . . . . . . . . . . . . . . . . . . . . . . . . 3200 mm
C. cab height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2750 mm
D. dumping height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2750 mm
E. dumping reach (45°) . . . . . . . . . . . . . . . . . . . . . . . . . . 750 mm
F. dumping angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45°
G. rollback angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45°
H. digging depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 mm
I. bucket reach (in transport). . . . . . . . . . . . . . . . . . . . . 1930 mm
J. ground clearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 430 mm
K. wheel base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2175 mm
L. backhoe swing centre distance. . . . . . . . . . . . . . . . . 1320 mm
M. transport length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5895 mm
N. dumping height SAE . . . . . . . . . . . . . . . . . . . . . . . . . 3700 mm
max dumping height . . . . . . . . . . . . . . . . . . . . . . . . . 3950 mm
- with telescopic SAE . . . . . . . . . . . . . . . . . . . . . . . . 4830 mm
- with telescopic max . . . . . . . . . . . . . . . . . . . . . . . . 5050 mm
O. max digging height . . . . . . . . . . . . . . . . . . . . . . . . . . 5510 mm
- with telescopic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6510 mm
P. digging depth SAE. . . . . . . . . . . . . . . . . . . . . . . . . . . 4500 mm
- with telescopic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5650 mm
Q. reach at max height . . . . . . . . . . . . . . . . . . . . . . . . . . 2500 mm
- with telescopic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3500 mm
- with off-set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2510 mm
R. max reach from swing centre . . . . . . . . . . . . . . . . . . 5550 mm
- with telescopic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6550 mm
S. max digging depth. . . . . . . . . . . . . . . . . . . . . . . . . . . 4950 mm
- with telescopic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6100 mm
T. digging reach. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2750 mm
U. rear tread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 mm
V. front tread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1920 mm
W. overall width (with bucket) . . . . . . . . . . . . . . . . . . . . . 2320 mm
X. transport hoe height . . . . . . . . . . . . . . . . . . . . . . . . . 3660 mm
- with telescopic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3700 mm
- with off-set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3760 mm
Y. off-set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1080 mm
Z. telescopic stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1150 mm