Komatsu PC130-8 User manual

www.Komatsu.com
CEN00292-02 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
Printed in Japan 200907 IP.As(05)
HORSEPOWER
Gross: 72.1 kW 96.6 HP @ 2200 rpm
Net: 68.4 kW 91.7 HP @ 2200 rpm
OPERATING WEIGHT
12380– 12740 kg 27,300– 28,100 lb
BUCKET CAPACITY
0.18– 0.6 m30.24– 0.78 yd3
Photo may include optional equipment.
PC130-8
PC
130
HYDRAULIC EXCAVATOR

HORSEPOWER
Gross: 72.1 kW 96.6 HP @ 2200 rpm
Net: 68.4 kW 91.7 HP @ 2200 rpm
OPERATING WEIGHT
12380 – 12740 kg
27,300 – 28,100 lb
BUCKET CAPACITY
0.18 – 0.6 m3
0.24 – 0.78 yd3
WALK-AROUND
HYDRAULIC EXCAVATOR HYDRAULIC EXCAVATOR
PC130-8
PC130-8
3
2
Large TFT LCD Monitor
• Easy-to-see and use 7" large multi-func-
tion color monitor
• Can be displayed in 12 languages for
global support.
TFT : Thin Film Transistor
LCD : Liquid Crystal Display
See page 9.
Large Comfortable Cab
• Low-noise cab, similar to passenger car
• Low vibration with cab damper mounting
• Highly pressurized cab with automatic air conditioner
• Operator seat and console with armrest that enables operations in the
appropriate operational posture.
See page 6.
Safety Design
• Cab dedicated to hydraulic excavator
for protecting the operator in the event
of a roll over accident.
• Anti-slip plates for safe work on
machine
• Safety enhancement with large side-
view, sidewise, rear and front under-
view mirrors added.
• Rear view monitoring system for easy
checking behind the machine (optional)
• OPG top guard level 2 capable with
optional bolt-on top guard.
See pages 6 and 7.
Photo may include optional equipment.
Excellent Reliability
and Durability
• High rigidity work equip-
ment
• Sturdy frame structure
• Reliable Komatsu manu-
factured major compo-
nents
See page 9.
Productivity Features
• Larger maximum drawbar pull
• Mode selection
• Economy mode improves fuel
consumption.
• Eco-gauge for energy-saving
operations
•Extended idling caution for fuel
conservation
See page 5.
Ecology and Economy Features
●Low emission engine
A powerful, turbocharged and air-to-air aftercooled Komatsu SAA4D95LE-5 provides 68.4 kW 91.7 HP. This engine
meets EPA Tier 3 and EU Stage 3A emissions certified, without sacrificing power or machine productivity.
●Low operation noise
The dynamic noise is reduced providing low noise operation.
See pages 4 and 5
Easy Maintenance
• Long replacement interval of engine oil, engine oil filter, and hydraulic filter
• Remote mounted engine oil filter, engine main fuel filter and fuel drain valve for easy access
• Equipped with the fuel pre-filter as standard (with water separator)
• Side-by-side cooling concept enables individual cooling modules to be serviced.
• Equipped with the EMMS monitoring system
See pages 8 and 9.

Komatsu Technology
Komatsu develops and produces all major
components in house such as engines, elec-
tronics and hydraulic components.
Combining “Komatsu Technology”, and cus-
tomer feedback, Komatsu is achieving great
advancements in technology.
To achieve both high levels of productivity and
economical performance, Komatsu has devel-
oped the main components with a total control
system. The result is a new generation of high
performance and environment-friendly exca-
vators.
4
PRODUCTIVITY & ECOLOGY FEATURES
HYDRAULIC EXCAVATOR PC130-8
Electronic control
unit for engine
Hydraulic system
controller
Engine
Heavy duty HPCR
(High Pressure
Common Rail)
system
Hydraulic control valve
Main pump
Seven-inch TFT liquid crystal display
5
HYDRAULIC EXCAVATOR
PC130-8
Low Emission Engine
Komatsu SAA4D95LE-5 is EPA Tier 3
and EU Stage 3A emissions certified.
Low Operation Noise
Enables low noise operation using the low-noise engine and
methods to cut noise at source.
Electronically controlled common rail type engine
• Multi-staged injection
Low noise design
• Optimal arrangement of sound absorbing materials
• Partition between the cab and engine room
Working Mode Application Advantage
Power mode ●Maximum production/power P●Fast cycle times
EEconomy ●Good cycle times
mode ●Better fuel economy
LLifting mode ●Suitable attachment speed
Breaker ●Optimum engine rpm,
Bmode hydraulic flow
Attachment ●Optimum engine rpm,
ATT mode hydraulic flow, 2way
Working Modes Selectable
The PC130-8 excavator is equipped with five working modes
(P, E, L, B and ATT mode). Each mode is designed to match
engine speed and pump speed with the current application.
This provides the flexibility to match equipment performance
to the job at hand.
Eco-gauge that Assists Energy-saving Operations
The Eco-gauge on the right side of the multi-function color
monitor provides environment-friendly energy-saving opera-
tion. Allows focus on operation in the green range with
reduced CO2emissions and efficient fuel consumption.
E
P
Fuel priority
E mode
Work priority
P mode
LL mode
BB mode
AT T
ATT mode
Idling Caution
To prevent unnecessary
fuel consumption, an
idling caution is displayed
on the monitor, if the
engine idles for 5 minutes
or more.
Eco-gauge
Larger Maximum Drawbar Pull
Larger maximum drawbar pull provides superb steering and
slope climbing performance.
Maximum drawbar pull: 122.6 kN 12500 kgf 27,570 lb
Photo may include optional equipment.
Photo may include optional equipment.

76
Low Cab Noise
The newly-designed cab is highly rigid
and has excellent sound absorption
ability. Thorough improvement of noise
source reduction and use of low noise
engine, hydraulic equipment, and air
conditioner allows this machine to gen-
erate a low level of noise similar to
that of a passenger car.
Low Vibration with Cab Damper
Mounting
PC130-8 uses viscous damper mount-
ing for cab that incorporates longer
stroke and the addition of a spring. The
new cab damper mounting combined
with high rigidity deck aids vibration
reduction at operator seat.
Wide Newly-designed Cab
Newly-designed wide spacious cab
includes seat with reclining backrest.
The seat height and longitudinal incli-
nation are easily adjusted using a pull-
up lever. You can set the appropriate
operational posture of armrest together
with the console.
Reclining the seat further enables you
to place it into the fully flat state with
the headrest attached.
Pressurized Cab
Air conditioner, air filter and a higher
internal air pressure (+6.0 mm Aq
+0.2"Aq) prevent external dust from
entering the cab.
Automatic Air Conditioner
Enables you
to easily and
precisely set
cab atmos-
phere with
the instru-
ments on the large LCD.
The bi-level control function keeps the
operator's head and feet cool and
warm respectively. This improved air
flow function keeps the inside of the
cab comfortable throughout the year.
Defroster function keeps front glass
clear.
Cab Dedicated to Hydraulic Excavator
The cab is designed specifically for hydraulic excavators and
gains reinforced strength from the pipe-structured cab frame-
work. The cab framework provides the high durability and
impact resistance with very high impact absorbency. The
seat belt keeps the operator in the seat of the cab during a
roll over.
Anti-slip Plates
Highly durable anti-
slip plates maintain
superior traction
performance for the
long term.
Pump/engine Room Partition
Pump/engine room partition prevents oil from spraying onto
the engine if a hydraulic hose should burst.
Lock Lever
Locks the hydraulic
pressure to prevent
unintentional move-
ment. Neutral start
function allows
machine to be started
only in lock position.
Large Side-view, Sidewise, Rear and Front Under-
view Mirrors
Enlarged side mirrors and addition of front under mirror allow
the PC130-8 to meet the new ISO visibility requirements.
Rear View Monitoring System (optional)
The operator can view the rear of the machine with a color
monitor screen.
Thermal and Fan Guards
Thermal and fan guards are
placed around high-tempera-
ture parts of the engine and
fan drive.
WORKING ENVIRONMENT
HYDRAULIC EXCAVATOR PC130-8
Safety Features
Rubber
Silicon
Oil
Spring
HYDRAULIC EXCAVATOR
PC130-8
Monitor for rear view camera

Side-by-side Cooling
Since radiator, aftercooler and oil cool-
er are arranged in parallel, it is easy to
clean, remove and install them.
Radiator, aftercooler, and oil cooler
made of aluminum have high cooling
efficiency and are easily recycled.
Equipped with the Fuel Pre-filter
(with Water Separator)
Removes water
and contaminants
in the fuel to pre-
vent fuel problems.
(with built-in prim-
ing pump)
Washable Cab Floormat
The PC130-8's cab floormat is easy
to keep clean. The gently
inclined surface has
a flanged
floormat and
drainage
holes to facil-
itate runoff.
Easy Access to Engine Oil Filter,
Engine Main Fuel Filter and Fuel
Drain Valve
Engine oil filter,
engine main fuel
filter and fuel drain
valve are remote
mounted to improve
accessibility.
Equipped with the Eco-drain
Valve as Standard.
Prevents clothes and the ground from
becoming contaminated due to oil
leakage when replacing the engine oil.
Large-capacity Fuel Tank and
Rustproof Treatment
247 liter 65.3 U.S. gal high-capacity
fuel tank. Effective corrosion resistance
using rustproof treatment.
Sloping Track Frame
Prevents dirt and sand from accumu-
lating and allows easy mud removal.
Long-life Oil, Filter
Uses high-performance
filtering materials and
long-life oil. Extends the
oil and filter replacement
interval.
Air Conditioner Filter
The air conditioner filter is removed
and installed without the use of tools
facilitating filter maintenance.
98
MAINTENANCE FEATURES
Engine oil &
Engine oil filter every 500 hours
Hydraulic oil every 5000 hours
Hydraulic oil filter every 1000 hours
Hydraulic oil filter
(Eco-white element)
Internal air conditioner
filter
External air conditioner
filter
HYDRAULIC EXCAVATOR
PC130-8 HYDRAULIC EXCAVATOR PC130-8
Excellent Reliability and Durability
Large TFT LCD Monitor
Basic
operation
switches
Air conditioner
operation
switches
Function
switches
8
1 2 3
4 5 6
7
5
6
1 2 3
4
6
7
8
1
2
3
4
5
1
2
3
4
5
6
Auto-decelerator
Working mode
Travel speed
Engine water
temperature gauge
Hydraulic oil
temperature gauge
Fuel gauge
Eco-gauge
Function switches menu
Auto-decelerator
Working mode selector
Traveling selector
Buzzer cancel
Wiper
Windshield washer
Indicators
Basic operation
switches
Large Multi-lingual LCD Monitor
A large user-friendly color monitor enables safe, accurate and smooth work.
Improved screen visibility is achieved by the use of TFT liquid crystal display that
can easily be read at various angles and lighting conditions. Simple and easy to
operate switches. Industry first function keys facilitate multi-function operations.
Displays data in 12 languages to globally support operators around the world.
EMMS (Equipment Management
Monitoring System)
Monitor function
Controller monitors engine oil level,
coolant temperature, battery charge and
air clogging, etc.
If controller finds
any abnormality,
it is displayed on
the LCD.
Maintenance function
Monitor informs replacement time of oil
and filters on
LCD when the
replacement
interval is
reached.
Trouble data memory function
Monitor stores abnormalities for
effective troubleshooting.
High Rigidity Work Equipment
Boom and arms are constructed of thick
plates of high tensile strength steel. In
addition, these structures are designed
with large cross-sectional areas and
generous use of castings. The result is
working attachments that exhibit long
term durability and high resistance to
bending and torsional stress.
Reliable Components
All of the major machine components,
such as engine, hydraulic pump,
hydraulic motors and control valves
are exclusively designed and manufac-
tured by Komatsu.
Metal Guard Rings Protect all
the Hydraulic Cylinders and
Improve Reliability.
DT-type Connectors
DT-type connectors seal tight and have
higher
reliability.
O-ring Face Seal
The hydraulic hose seal method has
been changed from a conventional taper
seal to an O-ring seal. This provides
improved
sealing
performance.
Waterproof seal
Waterproof
seal
Waterproof seal
Metal guard ring
(Cast iron ring)
Piston ring
Wear ring
Long Greasing Interval
(optional)
High quality bushings are option-
ally available for work equipment
pins except arm top pin. All
bushing lubrication intervals of
work equipment except arm top
bushings are 500 hours, reduc-
ing maintenance cost.

10
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA4D95LE-5
Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 mm 3.74"
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 mm 4.53"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . 3.26 ltr 199 in3
Horsepower:
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . Gross 72.1 kW 96.6 HP
ISO 9249 / SAE J1349. . . . . . . . . . . . . . . . . Net 68.4 kW 91.7 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2200 rpm
Fan drive method for radiator cooling . . . . . . . . . . . . . . . Mechanical
Governor . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic
EPA Tier 3 and EU Stage 3A emissions certified
HYDRAULICS
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design)
system, closed-center system with load sensing valves and
pressure compensated valves
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 5
Main pump:
Type . . . . . . . . . . . . . . . . . . . . . Variable displacement piston type
Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits
Maximum flow. . . . . . . . . . . . . . . . 241.5 ltr/min 63.8 U.S. gal/min
Supply for control circuit . . . . . . . . . . . . . . . . . Self-reducing valve
Hydraulic motors:
Travel. . . . . . . . . . . . . . . 2 x axial piston motor with parking brake
Swing . . . . . . . . . . 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits . . . . . . . . . . . . 31.9 MPa 325 kgf/cm24,620 psi
Travel circuit . . . . . . . . . . . . . . . . 34.8 MPa 355 kgf/cm25,050 psi
Swing circuit . . . . . . . . . . . . . . . . 24.7 MPa 252 kgf/cm23,580 psi
Pilot circuit . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kgf/cm2470 psi
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom . . . . . . . 2 –105 mm x 995 mm x 70 mm 4.1" x 39.2" x 2.8"
Arm . . . . . . . 1 –115 mm x 1175 mm x 75 mm 4.5" x 46.3" x 3.0"
Bucket:. . . . . . . 1 – 95 mm x 885 mm x 65 mm 3.7" x 34.8" x 2.6"
DRIVES AND BRAKES
Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull. . . . . . . . . . . . . 122.6 kN 12500 kg 27,570 lb
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Maximum travel speed: High . . . . . . . . . . . . . . . . . 5.5 km/h 3.4 mph
Low . . . . . . . . . . . . . . . . . 2.9 km/h 1.8 mph
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake
SWING SYSTEM
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Holding brake/Swing lock . . . . . . . . . . . . . . . . Mechanical disc brake
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.0 rpm
UNDERCARRIAGE
Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes (each side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Number of carrier rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . 1
Number of track rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . 7
COOLANT AND LUBRICANT
CAPACITY (REFILLING)
Fuel tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 ltr 65.3 U.S. gal
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.9 ltr 3.7 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.5 ltr 3.0 U.S. gal
Final drive, each side . . . . . . . . . . . . . . . . . . . . . . 2.1 ltr 0.6 U.S. gal
Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 ltr 0.7 U.S. gal
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 ltr 23.8 U.S. gal
OPERATING WEIGHT (APPROXIMATE)
Operating weight including 4600 mm 15'1" one-piece boom,
2500 mm 8'2" arm, SAE heaped 0.5 m30.65 yd3backhoe bucket,
rated capacity of lubricants, coolant, full fuel tank, operator, and
standard equipment.
PC130-8
Operating Ground
Shoes Weight Pressure
500 mm 12380 kg 38.6 kPa
0.39 kgf/cm2
20" 27,300 lb 5.60 psi
600 mm 12560 kg 32.6 kPa
0.33 kgf/cm2
24" 27,700 lb 4.73 psi
700 mm 12740 kg 28.4 kPa
0.29 kgf/cm2
28" 28,100 lb 4.12 psi
11
L
K
M
D,P
A
CE
G
O
N
F
H,Q
I
J
B
G.L
0123456798
0
1
2
3
4
5
6
7
8
9
-1
-2
-3
-4
-5
-6
G.L
F
G
2440(8")
H
B
ED
C
A
3
(m)
(m)
Arm 2500 mm 8'2" 3000 mm 9'10"
AMax. digging height 8650 mm 28'5" 8930 mm 29'4"
BMax. dumping height 6210 mm 20'4" 6615 mm 21'8"
CMax. digging depth 5520 mm 18'1" 5955 mm 19'6"
DMax. vertical wall
digging depth 4980 mm 16'4" 5365 mm 17'7"
EMax. digging depth
of cut for 8' level 5320 mm 17'5" 5775 mm 18'11"
FMax. digging reach 8290 mm 27'2" 8720 mm 28'7"
GMax. digging reach
at ground level 8170 mm 26'10" 8595 mm 28'2"
HMin. swing radius 2450 mm 8'0" 2620 mm 8'7"
Bucket digging force 80.9 kN 80.9 kN
at power max. 8250 kgf/18,190 lb 8250 kgf/18,190 lb
Arm crowd force 64.5 kN 56.8 kN
at power max. 6580 kgf/14,510 lb 5800 kgf/12,790 lb
Bucket digging force 93.4 kN 93.4 kN
at power max. 9520 kgf/21,000 lb 9520 kgf/21,000 lb
Arm crowd force 67.5 kN 59.3 kN
at power max. 6880 kgf/15,170 lb 6050 kgf/13,340 lb
Arm Length 2500 mm 8'2" 3000 mm 9'10"
AOverall length 7590 mm 24'11" 7485 mm 24'7"
BLength on ground (transport) 4410 mm 14'6" 4280 mm 14'1"
COverall height (to top of boom) 2875 mm 9'5" 3185 mm 10'5"
WORKING RANGE
DIMENSIONS
BACKHOE BUCKET, ARM, AND BOOM COMBINATION
ISO rating SAE rating
DOverall width 2500 mm 8'2"
EOverall height (to top of cab) 2855 mm 9'4"
FGround clearance, counterweight 895 mm 2'11"
GGround clearance (minimum) 400 mm 1'4"
HTail swing radius 2190 mm 7'2"
ITrack length on ground 2880 mm 9'5"
JTrack length 3610 mm 11'10"
KTrack gauge 1990 mm 6'6"
LWidth of crawler 2490 mm 8'2"
MShoe width 500 mm 20"
NGrouser height 20 mm 0.8"
OMachine cab height 1925 mm 6'4"
PMachine cab width 2500 mm 8'2"
QDistance, swing center to rear end 2110 mm 6'11"
SPECIFICATIONS
HYDRAULIC EXCAVATOR PC130-8
HYDRAULIC EXCAVATOR
PC130-8
Bucket Capacity (heaped) Width Number Arm Length
SAE, PCSA CECE Without Side With Side Weight 2500 mm 3000 mm
Cutters Cutters of Teeth 8'2" 9'10"
0.18 m30.16 m3450 mm 570 mm 256 kg 3
0.24 yd30.21 yd317.7" 22.4" 565 lb
0.28 m30.26 m3600 mm 720 mm 303 kg 3
0.37 yd30.34 yd323.6" 28.3" 670 lb
0.36 m30.33 m3700 mm 820 mm 330 kg 4
0.50 yd30.43 yd327.6" 32.3" 730 lb
0.50 m30.45 m3859 mm 979 mm 399 kg 4X
0.65 yd30.59 yd333.8" 38.5" 880 lb
0.60 m30.55 m31000 mm NA 436 kg 5□X
0.78 yd30.72 yd339.4" 960 lb
—General digging —Light-duty operation X— Not available

LIFTING CAPACITY WITH LIFTING MODE
A: Reach from swing center
B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
Cs: Rating over side
: Rating at maximum reach
Conditions:
●4600 mm 15'1" one-piece boom
●0.5 m3 0.65 yd3SAE heaped bucket
●500 mm 20" triple-grouser shoe
12
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J/ISO 10567. Rated loads do not exceed 87% of hydraulic lift
capacity or 75% of tipping load.
)
*
+
PC130-8 Arm: 2500 mm 8'2" Bucket: 0.5 m3 0.65 yd3SAE heaped Shoe: 500 mm 20” triple grouser
AMAX 7.6 m 25' 6.1 m 20' 4.6 m 15' 3.0 m 10' 1.5 m 5'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.6 m
25'
6.1 m *1950 kg *1950 kg
20' *4,300 lb *4,300 lb
4.6 m *1800 kg 1650 kg 2850 kg 1950 kg *3100 kg *3100 kg
15' *4,000 lb 3,600 lb 6,200 lb 4,300 lb *6,900 lb *6,900 lb
3.0 m *1800 kg 1400 kg 2750 kg 1900 kg *3900 kg 3100 kg *5000 kg *5000 kg
10' *4,000 lb 3,100 lb 6,100 lb 4,200 lb *8,600 lb 6,900 lb *11,100 lb *11,100 lb
1.5 m 1950 kg 1300 kg 2700 kg 1800 kg 4300 kg 2900 kg *7700 kg 5500 kg
5' 4,300 lb 2,800 lb 5,900 lb 4,000 lb 9,500 lb 6,400 lb *17,000 lb 12,100 lb
O m 1950 kg 1300 kg 2600 kg 1700 kg 4100 kg 2700 kg 8350 kg 5100 kg
0' 4,400 lb 2,900 lb 5,700 lb 3,800 lb 9,100 lb 6,000 lb 18,400 lb 11,200 lb
–1.5 m 2200 kg 1450 kg 2550 kg 1700 kg 3900 kg 2500 kg 8200 kg 5000 kg *4750 kg *4750 kg
–5' 4,800 lb 3,200 lb 5,600 lb 3,700 lb 8,600 lb 5,600 lb 18,100 lb 11,000 lb *10,400 lb *10,400 lb
–3.0 m 2800 kg 1850 kg 4050 kg 2650 kg *7850 kg 5050 kg *8000 kg *8000 kg
–10' 6,200 lb 4,100 lb 8,900 lb 5,800 lb *17,400 lb 11,100 lb *17,700 lb *17,700 lb
PC130-8 Arm: 3000 mm 9'10" Bucket: 0.5 m3 0.65 yd3SAE heaped Shoe: 500 mm 20” triple grouser
AMAX 7.6 m 25' 6.1 m 20' 4.6 m 15' 3.0 m 10' 1.5 m 5'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.6 m *1850 kg *1850 kg *2050 kg *2050 kg
25' *4,100 lb *4,100 lb *4,500 lb *4,500 lb
6.1 m *1500 kg *1500 kg *1850 kg *1850 kg
20' *3,400 lb *3,400 lb *4,100 lb *4,100 lb
4.6 m *1400 kg 1400 kg *2700 kg 1950 kg
15' *3,100 lb 3,100 lb *6,000 lb 4,300 lb
3.0 m *1400 kg 1200 kg *1550 kg 1200 kg 2750 kg 1900 kg *3400 kg 3150 kg
10' *3,100 lb 2,600 lb *3,400 lb 2,600 lb 6,100 lb 4,200 lb *7,400 lb 6,900 lb
1.5 m *1500 kg 1100 kg 1800 kg 1150 kg 2650 kg 1800 kg 4350 kg 2900 kg *6650 kg 5500 kg
5' *3,300 lb 2,400 lb 3,900 lb 2,600 lb 5,900 lb 3,900 lb 9,600 lb 6,400 lb *14,700 lb 12,100 lb
O m 1700 kg 1100 kg 1750 kg 1100 kg 2550 kg 1700 kg 4100 kg 2700 kg 8350 kg 5050 kg
0' 3,800 lb 2,400 lb 3,800 lb 2,500 lb 5,600 lb 3,700 lb 9,000 lb 5,900 lb 18,400 lb 11,200 lb
–1.5 m 1900 kg 1200 kg 2500 kg 1600 kg 3850 kg 2450 kg 8100 kg 4850 kg *4150 kg *4150 kg
–5' 4,100 lb 2,700 lb 5,500 lb 3,600 lb 8,500 lb 5,400 lb 17,800 lb 10,700 lb *9,100 lb *9,100 lb
–3.0 m 2300 kg 1500 kg 2500 kg 1600 kg 3900 kg 2550 kg 8100 kg 4850 kg *6750 kg *6750 kg
–10' 5,100 lb 3,300 lb 5,500 lb 3,600 lb 8,600 lb 5,600 lb 17,900 lb 10,700 lb *14,900 lb *14,900 lb
–4.6 m *3350 kg 2350 kg *3950 kg 2650 kg *6250 kg 5050 kg
–15' *7,400 lb 5,100 lb *8,700 lb 5,800 lb *13,800 lb 11,100 lb

13
OPTIONAL EQUIPMENT
●Additional filter system for poor-quality fuel
●Alternator, 60 Ampere, 24 V
●Arms
—2500 mm 8'2" arm assembly
—3000 mm 9'10" arm assembly
●Batteries, large capacity
●Bolt-on top guard, [Operator Protective
Guards level 2]
●Boom, 4600 mm 15'1"
●Cab accessories
—Rain visor
—Sun visor
●Cab front guard
—Full height guard
—Half height guard
●Long lubricating intervals for work equip-
ment bushing (500 hours)
●Rear view monitoring system
●Seat, suspension
●Service valve
●Shoes, triple grouser
—600 mm 24"
—700 mm 28"
●Track frame undercover
●Track roller guards (center section)
●Working lights
—2 on cab
—1 on counterweight
STANDARD EQUIPMENT
●Air conditioner with defroster
●Alternator, 35 Ampere, 24 V
●Anti-slip plates
●Auto-decel
●Automatic engine warm-up system
●Batteries, 64 Ah/2 x 12 V
●Boom holding valve
●Cab, OPG top guard level 2 capable with
optional bolt-on top guard
●Counterweight
●Dry type air cleaner, double element
●Electric horn
●EMMS monitoring system
●Engine, Komatsu SAA4D95LE-5
●Engine overheat prevention system
●Fan guard structure
●Front underview mirror
●Hydraulic track adjusters (each side)
●Multi-function color monitor
●Power maximizing system
●PPC hydraulic control system
●Radiator and oil cooler dust proof net
●Rear reflector
●Rearview mirrors (RH, LH, rear, sidewise)
●Seat belt, retractable
●Starting motor, 4.5 kW/24 V x 1
●Suction fan
●Track roller: 7 each side
●Track shoe: 500 mm 20" triple grouser
●Travel alarm
●Working light, 2 (boom and RH)
●Working mode selection system