Komatsu PC300-8 User manual

SPECIAL PURPOSE BUCKET
OPTIONAL EQUIPMENT
STANDARD EQUIPMENT
• Alternator, 60 Ampere, 24V
• Anti-slip plates
• Auto-decel
• Automatic engine warm-up system
• Batteries, 126 Ah/2 x 12V
• Boom holding valve
• Cab, capable OPG with optional bolt-on
top guard
• Corrosion resistor
• Counterweight
• Dry type air cleaner, double element
• Electric horn
• Engine, Komatsu SAA6D114E-3
• Engine overheat prevention system
• Fan guard structure
• Hydraulic track adjusters (each side)
• Multi-function color monitor
• Power maximizing system
• PPC hydraulic control system
• Radiator & oil cooler dust proof net
• Rear reflector
• Rear view mirror, RH, LH, rear,
sidewise
• Seat belt, retractable
• Starting motor, 7.5 kW/24 v x 1
• Suction fan
• Track guiding guard, center section
• Track roller
—PC300-8, 7 each side
—PC300LC-8, 8 each side
• Track shoe
—PC300-8, 600 mm 24" triple grouser
—PC300LC-8, 700 mm 28" triple grouser
• Travel alarm
• Two settings for boom
• Working light, 2 (boom and RH)
• Working mode selection system
• Additional filter system for poor-quality
fuel
• Air conditioner with defroster
•Arms
—2220 mm 7'3" arm assembly
—2550 mm 8'4" arm assembly
—3185 mm 10'5" arm assembly
—4020 mm 13'2" arm assembly
• Batteries, 140 Ah/2 x 12 V
• Bolt-on top guard, (Operator Protective
Guards level 2 (OPG))
• Boom, 6470 mm 21'3"
• Cab accessories
—Rain visor
—Sun visor
• Cab front guard
—Full height guard
—Half height guard
• Heater with defroster
• Long lubricating intervals for implement
bushing
• Rear view monitoring system
• Seat, suspension with heater
• Seat, suspension
• Service valve
• Shoes, triple grouser shoes
—PC300-8
700 mm 28", 800 mm 31.5"
—PC300LC-8
600 mm 24", 800 mm 31.5"
• Track roller guards (full length)
• Track frame undercover
• Working lights (2 on cab)
•Ripper bucket for hard and rock ground
—Capacity
SAE heaped 0.9 m31.18 yd3
CECE heaped 0.8 m31.05 yd3
Width 1200 mm 47.2"
www.Komatsu.com
CEN00219-04 Materials and specifications are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
Printed in Japan 200911 IP.As(15)
Photo may include optional equipment.
PC300-8
PC300LC-8
PC
300
FLYWHEEL HORSEPOWER
Gross: 194 kW 260 HP @ 1950 rpm
Net: 184 kW 246 HP @ 1950 rpm
OPERATING WEIGHT
PC300-8: 31100– 32010 kg
68,560– 70,570 lb
PC300LC-8: 31600– 32580 kg
69,670– 71,830 lb
HYDRAULIC EXCAVATOR

3
Photo may include optional equipment.
2
Easy Maintenance
•Long replacement interval of engine oil,
engine oil filter, hydraulic oil and
hydraulic filter.
•Equipped with fuel pre-filter as standard
(with water separator)
•Side-by-side radiator and oil cooler
configuration enables independent removal
and installation of those two components.
•Equipped with the EMMS monitoring
system.
•Easy access to engine oil filter and fuel
drain valve
•Large fuel tank capacity
See page 9.
Ecology and Economy Features
• Low emission engine
A powerful turbocharged and air to air aftercooled Komatsu SAA6D114E-3
engine provides 184 kW 246 HP. This engine meets EPA Tier 3 and EU Stage 3A
emissions certified, without sacrificing power or machine productivity.
•Economy mode saves fuel consumption.
•Low operation noise
See pages 4 and 5.
●High Production and
Low Fuel Consumption
High power, working performance
and fuel efficiency improve
production and fuel costs.
●Large Drawbar Pull
provides superb steering and slope
climbing performance.
●Large Digging Force
Pressing the Power Max function
button temporarily increases the
digging force 7%.
●Two-mode Setting for Boom
Switch selection allows either
powerful digging or smooth boom
operation.
See page 5.
Productivity Features
Safety Design
• Cab dedicated to hydraulic excavator for protecting the operator in the event of
a roll over accident.
• Anti-slip plates for safe work on machine
• Safety enhancement with large side-view, sidewise, and rear mirrors added.
• Rear view monitoring system for easy checking behind the machine (optional)
See page 7.
WALK-AROUND
HYDRAULIC EXCAVATOR HYDRAULIC EXCAVATOR
PC300-8
PC300-8 0
Large Comfortable Cab
• Low-noise cab
• Low vibration with cab damper mounting
• Highly pressurized cab with optional air conditioner
• Operator seat and console with armrest that enables
operations in the appropriate operational posture.
See page 6.
HORSEPOWER
Gross: 194 kW 260 HP @ 1950 rpm
Net: 184 kW 246 HP @ 1950 rpm
OPERATING WEIGHT
PC300-8: 31100 – 32010 kg
68,560 – 70,570 lb
PC300LC-8: 31600 – 32580 kg
69,670 – 71,830 lb
BUCKET CAPACITY
0.52 – 1.80 m3
0.68 – 2.35 yd3
Large TFT LCD Monitor
• Easy-to-see and use 7" large multi-function
color monitor
• Can be displayed in 12 languages for
global support.
TFT : Thin Film Transistor
LCD : Liquid Crystal Display
See page 8.

5
Larger Maximum
Drawbar Pull
Larger maximum draw-
bar pull provides superb
steering and slope
climbing performance.
Maximum drawbar pull:
264 kN 26900 kgf
59,300 lb
4
Smooth Loading Operation
Two return hoses improve
hydraulic performance. In the arm
out function, a portion of the oil is
returned directly to the tank
providing smooth operation.
Boom floats upward, reducing
lifting of machine front. This
facilitates gathering blasted rock
and scraping down operations.
Boom pushing force is
increased, ditch digging and
box digging operation on hard
ground are improved.
Two-mode Setting for Boom
Smooth mode provides easy operation for gathering blasted
rock or scraping down operation. When maximum digging
force is needed, switch to Power mode for more effective
excavating.
PRODUCTIVITY & ECOLOGY FEATURES
HYDRAULIC EXCAVATOR
Environment-friendly Clean Engine
The PC300-8 gets its exceptional power and work capacity
from a Komatsu SAA6D114E-3 engine. Output is 184 kW
246 HP, providing increased hydraulic power and improved
fuel efficiency.
Komatsu SAA6D114E-3 engine meets EPA Tier 3 and EU
Stage 3A emissions certified and reduced NOx emission by
40%.
The SAA6D114E-3 engine adopts the electronically con-
trolled Heavy Duty HPCR* fuel injection system.
*HPCR : High Pressure Common Rail
Hydraulics
Unique two-pump system ensures smooth compound
movement of the work equipment. HydrauMind controls
both pumps for efficient engine power use. This system
also reduces hydraulic loss during operation.
Low Operation Noise
Enables a low noise operation using the low-noise engine
and methods to cut noise at source. Ambient noise meets
the EU Stage 2 noise regulation.
Electronic control
unit for engine
Hydraulic system
controller
Engine
Heavy duty HPCR (High Pressure
Common Rail) system
Hydraulic control valve
Main pump
Seven-inch TFT
liquid crystal display
Komatsu Technology
Komatsu develops and produces all major
components, such as engines, electronics
and hydraulic components, in house.
With this “Komatsu Technology,” and adding
customer feedback, Komatsu is achieving
great advancements in technology.
To achieve both high levels of productivity
and economical performance, Komatsu has
developed the main components with a total
control system. The result is a new genera-
tion of high performance and environment
friendly excavators.
Smooth mode Power mode
Return hoses
Large Digging Force
With the one-touch Power Max. function digging force has
been further increased. (8.5 seconds of operation)
Maximum arm crowd force (ISO):
160 kN (16.3t) 171 kN (17.4t)
(with Power Max.)
Maximum bucket digging force (ISO):
212 kN (21.6t) 227 kN (23.1t)
(with Power Max.)
*Measured with Power Max function, 3185 mm 10'5" arm and ISO rating
7% UP
7% UP
HYDRAULIC EXCAVATOR
PC300-8
PC300-8 0
Working Modes Selectable
Two established work modes are further improved.
P mode – Power or
work priority mode has
low fuel consumption,
but fast equipment
speed and maximum
production and power
are maintained.
E mode – Economy or
fuel priority mode
further reduces fuel
consumption, but
maintains the P-mode-like working equipment speed for light
duty work.
You can select Power or Economy modes using a one-touch
operation on the monitor panel depending on workloads.
E
P
Fuel priority
E mode
Work priority
P mode
Idling Caution
To prevent unnecessary
fuel consumption, an idling
caution is displayed on the
monitor, if the engine idles
for 5 minutes or more.
Eco-gauge that Assists Energy-saving Operations
Equipped with the Eco-gauge that can be recognized at a
glance on the right of the multi-function color monitor for
environment-friendly
energy-saving opera-
tions. Allows focus on
operation in the green
range with reduced CO2
emissions and efficient
fuel consumption.
Eco-gauge

Lock Lever
Locks the hydraulic
pressure to prevent
unintentional move-
ment. Neutral start
function allows
machine to be started
only in lock position.
Large Side-view, Rear, and
Sidewise Mirrors
Enlarged left-side mirror and addition of
rear and side mirror allow the PC300-8
to meet the new ISO visibility require-
ments.
7
6
WORKING ENVIRONMENT
HYDRAULIC EXCAVATOR PC300-8 0
HYDRAULIC EXCAVATOR
PC300-8
Low Cab Noise
The newly-designed cab is highly rigid
and has excellent sound absorption
ability. Thorough improvement of noise
source reduction and use of low noise
engine, hydraulic equipment, and air
conditioner allows this machine to
generate a low level of noise.
Low Vibration with Cab Damper
Mounting
PC300-8 uses viscous damper mount-
ing for cab that incorporates longer
stroke and the addition of a spring.
The new cab damper mounting
combined with high rigidity deck aids
vibration reduction at operator seat.
Wide Newly-designed Cab
Newly-designed wide spacious cab
includes seat with reclining backrest.
The seat height and longitudinal incli-
nation are easily adjusted using a pull-
up lever. You can set the appropriate
operational posture of armrest together
with the console.
Reclining the seat further enables you
to place it into the fully flat state with
the headrest attached.
Pressurized Cab
Optional air conditioner, air filter and a
higher internal air pressure (+6.0 mm
Aq +0.2"Aq) prevent external dust
from entering the cab.
Automatic Air Conditioner
(optional)
Enables you
to easily and
precisely set
cab atmos-
phere with
the instru-
ments on the large LCD.
The bi-level control function keeps the
operator's head and feet cool and
warm respectively. This improved air
flow function keeps the inside of the
cab comfortable throughout the year.
Defroster function keeps front glass
clear.
Safety Features
Rubber
Silicon
Oil
Spring
Pump/engine Room Partition
Pump/engine room partition prevents oil from spraying onto
the engine if a hydraulic hose should burst.
Thermal and Fan Guards
Thermal and fan
guards are placed
around high-temper-
ature parts of the
engine and fan
drive.
Anti-slip Plates
Highly durable anti-
slip plates maintain
superior traction
performance for the
long term.
Cab Dedicated to Hydraulic Excavator
The cab is designed specifically for hydraulic excavators and
gains reinforced strength from the pipe-structured cab frame-
work. The cab framework provides the high durability and
impact resistance with very high impact absorbency. The
seat belt keeps the operator in the seat of the cab during a
roll over.

Easy Radiator Cleaning
Since radiator and oil cooler are
arranged side-by-side, it is easy to
clean, remove and install them.
Equipped with the Eco-drain
Valve as Standard
Prevents clothes and the ground from
becoming contaminated due to oil
leakage when replacing the engine oil.
Easy Access to Engine Oil Filter
and Fuel Drain Valve
Engine oil level gauge, and fuel filter
are one side mounted to improve
accessibility. Engine oil filter and fuel
drain valve are remotely mounted to
improve accessibility.
Long Work Equipment Greasing
Interval (optional)
High quality BMRC bushings and resin
shims are optionally available for work
equipment pins excluding bucket,
extending greasing interval to 500
hours.
Equipped with the
Fuel Pre-filter
(with Water Separator)
Removes water and
contaminants in the
fuel to prevent fuel
problems.
9
8
HYDRAULIC EXCAVATOR PC300-8 0
Long-life Oil, Filter
Uses high-performance
filtering materials and
long-life oil. Extends the
oil and filter replacement
interval.
Easy Maintenance
Engine Oil Filter Fuel Drain Valve
High-capacity Air Cleaner
High capacity air cleaner is compara-
ble to that of larger machines. The
larger air cleaner can extend air clean-
er life during long-term operation and
prevents early
clogging and
resulting power
decrease.
Reliability is
improved by a
new seal design.
Large Fuel Tank Capacity
Large fuel tank capacity extends oper-
ating hours before refueling. Fuel tank
is treated for rust prevention and
improved corrosion
resistance.
HYDRAULIC EXCAVATOR
PC300-8
Engine oil &
Engine oil filter every 500 hours
Hydraulic oil every 5000 hours
Hydraulic oil filter every 1000 hours
Hydraulic oil filter
(Eco-white element)
Large LCD Color Monitor
Working Mode Application Advantage
Power mode ●Maximum production/power P●Fast cycle time
EEconomy mode ●Excellent fuel economy
LLifting mode ●Hydraulic pressure is
increased by 7%
BBreaker ●Optimum engine rpm,
operation hydraulic flow
ATT Attachment ●Optimum engine rpm,
mode hydraulic flow, 2 way
Mode Selection
The multi-function color monitor has Power mode, Economy
mode, Lifting mode, Breaker mode and Attachment mode.
Lifting Mode
When the Lifting mode is selected, lifting capacity is
increased 7% by raising hydraulic pressure.
6
7
8
1
2
3
4
5
1
2
3
4
5
6
Hydraulic oil temperature gauge
Fuel gauge
Eco-gauge
Function switches menu
Auto-decelerator
Working mode
Travel speed
Engine water
temperature gauge
Auto-decelerator
Working mode selector
Traveling selector
Buzzer cancel
Wiper
Windshield washer
Indicators
Basic operation switches
Basic
operation
switches
Air conditioner
operation
switches
Function
switches
8
1 2 3
4 5 6
7
5
6
1 2 3
4
Large Multi-lingual LCD Monitor
A large user-friendly color monitor
enables safe, accurate and smooth work.
Improved screen visibility is achieved by
the use of TFT liquid crystal display that
can easily be read at various angles and
lighting conditions. Simple and easy to
operate switches. Function keys facilitate
multi-function operations.
Displays data in 12 languages to globally
support operators around the world.
EMMS
(Equipment Management Monitoring System)
Monitor Function
Controller monitors engine oil
level, coolant temperature, bat-
tery charge and air clogging,
etc. If controller finds any
abnormality, it is displayed on
the LCD.
Maintenance Function
Monitor informs replacement
time of oil and filters on LCD
when the replacement interval
is reached.
Trouble Data Memory
Function
Monitor stores abnormalities for
effective troubleshooting.
MAINTENANCE FEATURES
Photo may include
optional equipment.

10
ENGINE
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D114E-3
Type . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 mm 4.49"
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 mm 5.31"
Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . 8.27 ltr 505 in3
Horsepower:
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . Gross 194 kW 260 HP
ISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . Net 184 kW 246 HP
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 rpm
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical
Governor . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic
EPA Tier 3 and EU Stage 3A emissions certified.
HYDRAULICS
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design)
system, closed-center system with load sensing valves and
pressure compensated valves
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 4
Main pump:
Type . . . . . . . . . . . . . . . . . Two-variable displacement piston type
Pumps for . . . . . . . . Boom, arm, bucket, swing, and travel circuits
Maximum flow . . . . . . . . . . . . . . . . . 535 ltr/min 141 U.S. gal/min
Supply for control circuit . . . . . . . . . . . . . . . . . Self-reducing valve
Hydraulic motors:
Travel . . . . . . . . . . . . . . 2 x axial piston motors with parking brake
Swing . . . . . . . . . . 1 x axial piston motor with swing holding brake
Relief valve setting:
Implement circuits . . . . . . . . . . . . 37.3 MPa 380 kgf/cm25,400 psi
Travel circuit . . . . . . . . . . . . . . . . 37.3 MPa 380 kgf/cm25,400 psi
Swing circuit . . . . . . . . . . . . . . . . 27.9 MPa 285 kgf/cm24,050 psi
Pilot circuit . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kgf/cm2470 psi
Hydraulic cylinders:
(Number of cylinders – bore x stroke x rod diameter)
Boom . . . . . 2 –140 mm x 1480 mm x 100 mm 5.5" x 58.3" x 3.9"
Arm . . . . . . 1 – 160 mm x 1825 mm x 110 mm 6.3" x 71.9" x 4.3"
Bucket: . . . . . . . . . . . . . . . for 3.19 m 10'5" and 4.02 m 13'2" Arm
1 – 140 mm x 1285 mm x 100 mm 5.5" x 50.6" x 3.9"
. . . . . . . . . . . . . . . . . for 2.22 m 7'3" and 2.55 m 8'4" Arm
1 – 150 mm x 1285 mm x 110 mm 5.9" x 50.6" x 4.3"
DRIVES AND BRAKES
Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull. . . . . . . . . . . . . . 264 kN 26900 kgf 59,300 lb
Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Maximum travel speed: High . . . . . . . . . . . . . . . . . 5.5 km/h 3.4 mph
(Auto-Shift) Mid. . . . . . . . . . . . . . . . . . 4.5 km/h 2.8 mph
Low . . . . . . . . . . . . . . . . . 3.2 km/h 2.0 mph
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake
UNDERCARRIAGE
Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Seal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Number of shoes (each side):
PC300-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
PC300LC-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Number of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side
Number of track rollers (each side):
PC300-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PC300LC-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
COOLANT AND LUBRICANT
CAPACITY (REFILLING)
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605 ltr 160 U.S. gal
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.0 ltr 8.5 U.S. gal
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.0 ltr 9.2 U.S. gal
Final drive, each side . . . . . . . . . . . . . . . . . . . . . . 9.0 ltr 2.4 U.S. gal
Swing drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 ltr 4.4 U.S. gal
Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . 188 ltr 49.7 U.S. gal
OPERATING WEIGHT (APPROXIMATE)
Operating weight including 6470 mm 21'3" one-piece boom,
3185 mm 10'5" arm, SAE heaped 1.4 m31.83 yd3bucket, rated
capacity of lubricants, coolant, full fuel tank, operator, and standard
equipment.
PC300-8 PC300LC-8
Operating Ground Operating Ground
Shoes Weight Pressure Weight Pressure
600 mm 31100 kg 62.9 kPa 31600 kg 59.0 kPa
0.64 kgf/cm20.60 kgf/cm2
24" 68,560 lb 9.12 psi 69,670 lb 8.56 psi
700 mm 31660 kg 54.8 kPa 32200 kg 51.6 kPa
0.56 kgf/cm20.53 kgf/cm2
28" 69,800 lb 7.95 psi 70,990 lb 7.48 psi
800 mm 32010 kg 48.5 kPa 32580 kg 45.7 kPa
0.49 kgf/cm20.47 kgf/cm2
31.5" 70,570 lb 7.03 psi 72,000 lb 6.63 psi
11
D,L
P**
K
E* C*
M
G
H,Q
A
F
O
N
I
J
B
G.L.
H
B
A
CED
F
G
2440 8’
0
-1
-2
-3
-4
-5
-7
-8
-6
0123456789 10
5
6
7
8
9
11
10
1112
(m)
1
2
3
4
(m)
Bucket Capacity
Number
(heaped) Width Weight Arm Length
SAE, PCSA CECE Without Side Cutters With Side Cutters With Side Cutters of Teeth 2.22 m 7'3" 2.55 m 8'4" 3.19 m 10'5" 4.02 m 13'2"
0.52 m3 0.68 yd30.48 m30.63 yd3610 mm 24.0" 740 mm 29.1" 664 kg 1,460 lb 3  
1.14 m31.49 yd31.00 m31.31 yd31145 mm 45.1" 1275 mm 50.2" 900 kg 1,980 lb 4  
1.40 m31.83 yd31.20 m31.57 yd31340 mm 52.8" 1445 mm 56.9" 1015 kg 2,240 lb 5  
1.60 m32.09 yd31.40 m31.83 yd31515 mm 59.6" 1645 mm 64.8" 1102 kg 2,430 lb 6 □□ □ X
1.80 m32.35 yd31.60 m32.09 yd31700 mm 66.9" — *1115 kg 2,460 lb 6  X
**1.40 m31.83 yd31.20 m31.57 yd31458 mm 57.4" — 1508 kg 3,320 lb 5   X
Arm 2220 mm 7'3" 2550 mm 8'4" 3185 mm 10'5" 4020 mm 13'2"
AMax. digging height 9460 mm 31'0" 9965 mm 32'8" 10100 mm 33'2" 10550 mm 34'7"
BMax. dumping height 6520 mm 21'5" 6895 mm 22'7" 7050 mm 23'2" 7490 mm 24'7"
CMax. digging depth 6400 mm 21'0" 6750 mm 22'2" 7380 mm 24'3" 8200 mm 26'11"
DMax. vertical wall
digging depth 4890 mm 16'1" 5880 mm 19'4" 6400 mm 21'0" 7280 mm 23'11"
EMax. digging depth
of cut for 8' level 6130 mm 20'1" 6520 mm 21'5" 7180 mm 23'7" 8045 mm 26'5"
FMax. digging reach 10120 mm 33'2" 10550 mm 34'7" 11100 mm 36'5" 11900 mm 39'1"
GMax. digging reach
at ground level 9910 mm 32'6" 10355 mm 34'0" 10920 mm 35'10" 11730 mm 38'6"
HMin. swing radius 4470 mm 14'8" 4450 mm 14'7" 4310 mm 14'2" 4370 mm 14'4"
Bucket digging force 228 kN 228 kN 200 kN 200 kN
at power max. 23300 kgf/51,370 lb 23300 kgf/51,370 lb 20400 kgf/44,970 lb 20400 kgf/44,970 lb
Arm crowd force 225 kN 193 kN 165 kN 139 kN
at power max. 22900 kgf/50,490 lb 19700 kgf/43,430 lb 16800 kgf/37,040 lb 14200 kgf/31,310 lb
Bucket digging force 259 kN 259 kN 227 kN 227 kN
at power max. 26400 kgf/58,200 lb 26400 kgf/58,200 lb 23100 kgf/50,930 lb 23100 kgf/50,930 lb
Arm crowd force 235 kN 201 kN 171 kN 144 kN
at power max. 24000 kgf/52,910 lb 20500 kgf/45,190 lb 17400 kgf/38,360 lb 14700 kgf/32,410 lb
Arm Length 2220 mm 7'3" 2550 mm 8'4" 3185 mm 10'5" 4020 mm 13'2"
AOverall length 11300 mm 37'1" 11180 mm 36'8" 11140 mm 36'7" 11170 mm 36'8"
BLength on ground (transport):
PC300-8 7320 mm 24'0" 6685 mm 21'11" 5755 mm 18'11" 5300 mm 17'5"
PC300LC-8 7495 mm 24'7" 6860 mm 22'6" 5930 mm 19'5" 5475 mm 18'0"
COverall height (to top of boom)* 3480 mm 11'5" 3450 mm 11'4" 3285 mm 10'9" 3760 mm 12'4"
WORKING RANGE
DIMENSIONS
: General purpose use, density up to 1.8 ton/m31.52 U.S. ton/yd3X: Not usable
□: General purpose use, density up to 1.5 ton/m31.26 U.S. ton/yd3*: Without side cutters
: Light duty work, density up to 1.2 ton/m31.01 U.S. ton/yd3**: Rock bucket (with side shroud)
BACKHOE BUCKET, ARM, AND BOOM COMBINATION
ISO rating SAE rating
PC300-8 PC300LC-8
DOverall width 3190 mm 10'6" 3290 mm 10'10"
EOverall height (to top of cab)* 3145 mm 10'4" 3145 mm 10'4"
FGround clearance, counterweight 1185 mm 3'11" 1185 mm 3'11"
GGround clearance (minimum) 500 mm 1'8" 500 mm 1'8"
HTail swing radius 3450 mm 11'4" 3450 mm 11'4"
ITrack length on ground 3700 mm 12'2" 4030 mm 13'3"
JTrack length 4625 mm 15'2" 4955 mm 16'3"
KTrack gauge 2590 mm 8'6" 2590 mm 8'6"
LWidth of crawler 3190 mm 10'6" 3290 mm 10'10"
MShoe width 600 mm 24" 700 mm 28"
NGrouser height 36 mm 1.4" 36 mm 1.4"
OMachine cab height 2585 mm 8'6" 2585 mm 8'6"
PMachine cab width** 3090 mm 10'2" 3090 mm 10'2"
QDistance, swing center to rear end 3405 mm 11'2" 3405 mm 11'2"
SPECIFICATIONS
HYDRAULIC EXCAVATOR PC300-8 0
SWING SYSTEM
Drive method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Holding brake/Swing lock . . . . . . . . . . . . . . . . Mechanical disc brake
Swing speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 rpm
HYDRAULIC EXCAVATOR
PC300-8
*: Including grouser height
**: Including handrail

LIFTING CAPACITY WITH LIFTING MODE
A: Reach from swing center
B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
Cs: Rating over side
: Rating at maximum reach
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
A
B
C
12
PC300-8 Arm: 2200 mm 7'3" Bucket: 1.40 m31.83 yd3SAE heaped Shoe: 600 mm 24” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *8650 kg 6750 kg
24' *19,100 lb 14,900 lb
6.0m 7350 kg 5000 kg 7450 kg 5100 kg *9100 kg 7700 kg
19' 16,200 lb 11,100 lb 16,400 lb 11,200 lb *20,100 lb 17,000 lb
4.5 m 6200 kg 4150 kg 7250 kg 4900 kg *10250 kg 7200 kg *13800 kg 11600 kg
14' 13,700 lb 9,200 lb 16,000 lb 10,800 lb *22,600 lb 15,900 lb *30,400 lb 25,600 lb
3.0 m 5650 kg 3750 kg 6950 kg 4650 kg 10050 kg 6700 kg
9' 12,400 lb 8,200 lb 15,300 lb 10,200 lb 22,200 lb 14,800 lb
1.5 m 5450 kg 3550 kg 6700 kg 4400 kg 9600 kg 6250 kg
4' 12,000 lb 7,800 lb 14,800 lb 9,700 lb 21,100 lb 13,800 lb
0 m 5600 kg 3650 kg 6550 kg 4250 kg 9300 kg 6000 kg
0' 12,300 lb 8,000 lb 14,500 lb 9,400 lb 20,500 lb 13,300 lb
–1.5 m 6150 kg 4000 kg 6500 kg 4250 kg 9250 kg 5950 kg 15150 kg 9550 kg
–4' 13,600 lb 8,800 lb 14,400 lb 9,300 lb 20,400 lb 13,100 lb 33,400 lb 21,100 lb
–3.0 m 7550 kg 4900 kg 9400 kg 6100 kg *13400 kg 9750 kg *14850 kg *14850 kg
–9' 16,600 lb 10,800 lb 20,700 lb 13,400 lb *29,600 lb 21,500 lb *32,700 lb *32,700 lb
–4.5 m *7750 kg 7350 kg *6550 kg 6450 kg *9850 kg *9850 kg
–14' *17,100 lb 16,300 lb *14,400 lb 14,200 lb *21,800 lb *21,800 lb
PC300-8 Arm: 2550 mm 8'4" Bucket: 1.40 m31.83 yd3SAE heaped Shoe: 600 mm 24” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *7600 kg 5750 kg
24' *16,700 lb 12,600 lb
6.0m 6500 kg 4450 kg 7550 kg 5200 kg
19' 14,300 lb 9,800 lb 16,700 lb 11,500 lb
4.5 m 5600 kg 3750 kg 7350 kg 5000 kg *9900 kg 7350 kg *13000 kg 11900 kg
14' 12,400 lb 8,300 lb 16,200 lb 11,000 lb *21,900 lb 16,200 lb *28,600 lb 26,200 lb
3.0 m 5150 kg 3400 kg 5150 kg 3400 kg 7050 kg 4700 kg 10200 kg 6850 kg *15500 kg 10650 kg
9' 11,400 lb 7,500 lb 11,400 lb 7,500 lb 15,500 lb 10,400 lb 22,500 lb 15,100 lb *34,100 lb 23,500 lb
1.5 m 5000 kg 3250 kg 5000 kg 3250 kg 6750 kg 4450 kg 9700 kg 6350 kg
4' 11,000 lb 7,200 lb 11,100 lb 7,200 lb 14,900 lb 9,900 lb 21,400 lb 14,100 lb
0 m 5100 kg 3300 kg 4950 kg 3200 kg 6600 kg 4300 kg 9400 kg 6100 kg *14650 kg 9500 kg
0' 11,300 lb 7,300 lb 10900 lb 7,000 lb 14,500 lb 9,500 lb 20,700 lb 13,400 lb *32,300 lb 20,900 lb
–1.5 m 5550 kg 3600 kg 6500 kg 4250 kg 9250 kg 6000 kg *15200 kg 9550 kg
–4' 12,300 lb 8,000 lb 14,400 lb 9,300 lb 20,400 lb 13,200 lb *33,600 lb 21,100 lb
–3.0 m 6600 kg 4300 kg 6600 kg 4300 kg 9350 kg 6050 kg *14250 kg 9750 kg *17150 kg *17150 kg
–9' 14,600 lb 9,500 lb 14,500 lb 9,500 lb 20,600 lb 13,400 lb *31,500 lb 21,500 lb *37,800 lb *37,800 lb
–4.5 m *7400 kg 6000 kg *8300 kg 6350 kg *11050 kg 9950 kg *13100 kg *13100 kg
–14' *16,400 lb 13,200 lb *18,300 lb 14,000 lb *24,300 lb 22,000 lb *28,900 lb *28,900 lb
PC300-8 Arm: 4020 mm 13'2" Bucket: 1.14 m31.49 yd3SAE heaped Shoe: 600 mm 24” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9' 1.5 m 4.5'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *4150 kg 4050 kg
24' *9,200 lb 8,900 lb
6.0 m *4050 kg 3300 kg 5700 kg 3900 kg
19' *9,000 lb 7,300 lb 12,500 lb 8,600 lb
4.5 m *4150 kg 2900 kg 5550 kg 3750 kg *7100 kg 5350 kg
14' *9,100 lb 6,400 lb 12,300 lb 8,300 lb *15,700 lb 11,800 lb
3.0 m 4100 kg 2650 kg 5350 kg 3600 kg 7350 kg 5000 kg *9650 kg 7300 kg *12950 kg 11800 kg
9' 9,000 lb 5,800 lb 11,800 lb 7,900 lb 16,300 lb 11,100 lb *21,300 lb 16,200 lb *28,600 lb 26,000 lb
1.5 m 3950 kg 2550 kg 5150 kg 3400 kg 7000 kg 4650 kg 10100 kg 6750 kg *15950 kg 10550 kg
4' 8,700 lb 5,600 lb 11,400 lb 7,500 lb 15,400 lb 10,300 lb 22,300 lb 14,800 lb *35,200 lb 23,300 lb
O m 4000 kg 2550 kg 5000 kg 3250 kg 6700 kg 4400 kg 9600 kg 6250 kg 15450 kg 9700 kg
0' 8,800 lb 5,600 lb 11,000 lb 7,100 lb 14,800 lb 9,700 lb 21,100 lb 13,800 lb 34,100 lb 21,400 lb
–1.5 m 4250 kg 2700 kg 4850 kg 3100 kg 6500 kg 4200 kg 9250 kg 5950 kg 15,050 kg 9350 kg *9750 kg *9750 kg *6900 kg *6900 kg
–4' 9,400 lb 5,900 lb 10,700 lb 6,900 lb 14,300 lb 9,300 lb 20,400 lb 13,200 lb 33,100 lb 20,600 lb *21,500 lb *21,500 lb 15,200 lb 15,200 lb
–3.0 m 4750 kg 3050 kg 4850 kg 3100 kg 6450 kg 4150 kg 9150 kg 5900 kg 15000 kg 9350 kg *15450 kg *15450 kg *9900 kg *9900 kg
–9' 10,500 lb 6,700 lb 10,700 lb 6,900 lb 14,200 lb 9,100 lb 20,200 lb 13,000 lb 33,100 lb 20,600 lb *34,100 lb *34,100 lb 21,800 lb 21,800 lb
–4.5 m 5800 kg 3750 kg 6500 kg 4200 kg 9250 kg 6000 kg *14500 kg 9550 kg *20000 kg 19800 kg *14850 kg *14850 kg
–14' 12,800 lb 8,300 lb 14,400 lb 9,300 lb 20,400 lb 13,200 lb *31,900 lb 21,100 lb *44,100 lb *43,600 lb 32,800 lb 32,800 lb
–6.0 m *6550 kg 5400 kg *8150 kg 6250 kg *11050 kg 9850 kg *14600 kg *14600 kg
–19’ *14,400 lb 11,900 lb *18,000 lb 13,800 lb *24,400 lb 21,700 lb *32,200 lb *32,200 lb
PC300-8 Arm: 3185 mm 10'5" Bucket: 1.40 m31.83 yd3SAE heaped Shoe: 600 mm 24” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *5300 kg 4950 kg *6850 kg 5400 kg
24' *11,700 lb 10,900 lb *15,200 lb 11,900 lb
6.0 m *5250 kg 3950 kg *7250 kg 5350 kg
19' *11,600 lb 8,700 lb *16,000 lb 11,800 lb
4.5 m 5050 kg 3350 kg 5350 kg 3600 kg 7500 kg 5150 kg *9200 kg 7600 kg
14' 11,200 lb 7,400 lb 11,800 lb 7,900 lb 16,500 lb 11,300 lb *20,300 lb 16,700 lb
3.0 m 4700 kg 3050 kg 5250 kg 3450 kg 7150 kg 4850 kg 10450 kg 7050 kg *15000 kg 11200 kg
9' 10,300 lb 6,800 lb 11,500 lb 7,600 lb 15,800 lb 10,700 lb 23,000 lb 15,600 lb *33,100 lb 24,700 lb
1.5 m 4550 kg 2950 kg 5050 kg 3300 kg 6900 kg 4550 kg 9900 kg 6550 kg 16000 kg 10200 kg
4' 10,000 lb 6,500 lb 11,200 lb 7,300 lb 15,200 lb 10,100 lb 21,800 lb 14,500 lb 35,300 lb 22,500 lb
O m 4600 kg 3000 kg 4950 kg 3200 kg 6650 kg 4350 kg 9500 kg 6200 kg 15400 kg 9700 kg
0' 10,200 lb 6,600 lb 10,900 lb 7,100 lb 14,700 lb 9,600 lb 21,000 lb 13,700 lb 34,000 lb 21,400 lb
–1.5 m 4950 kg 3200 kg 4900 kg 3150 kg 6550 kg 4250 kg 9350 kg 6050 kg 15250 kg 9550 kg *9600 kg *9600 kg
–4' 11,000 lb 7,100 lb 10,800 lb 7,000 lb 14,400 lb 9,400 lb 20,600 lb 13,300 lb 33,700 lb 21,100 lb *21,100 lb *21,100 lb
–3.0 m 5750 kg 3750 kg 6550 kg 4250 kg 9350 kg 6050 kg 15300 kg 9700 kg *18050 kg *18050 kg
–9' 12,700 lb 8,200 lb 14,400 lb 9,400 lb 20,600 lb 13,300 lb 33,800 lb 21,400 lb *39,700 lb *39,700 lb
–4.5 m 7450 kg 4900 kg 9450 kg 6200 kg *12850 kg 9950 kg *16600 kg *16600 kg
–14' 16,400 lb 10,800 lb 20,900 lb 13,700 lb *28,400 lb 22,000 lb *36,600 lb *36,600 lb
–6.0 m *6300 kg *6300 kg *8150 kg *8150 kg
–19’ *13,900 lb *13,900 lb *18,000 lb *18,000 lb

PC300LC-8 Arm: 4020 mm 13'2" Bucket: 1.14 m31.49 yd3SAE heaped Shoe: 700 mm 28” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9' 1.5 m 4.5'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *4150 kg *4150 kg
24' *9,200 lb *9,200 lb
6.0m *4050 kg 3500 kg *6250 kg 4100 kg
19' *9,000 lb 7,800 lb *13,800 lb 9,000 lb
4.5 m *4150 kg 3100 kg *6500 kg 4000 kg *7100 kg 5600 kg
14' *9,100 lb 6,800 lb *14,400 lb 8,800 lb *15,700 lb 12,400 lb
3.0 m *4300 kg 2800 kg 6350 kg 3800 kg *8000 kg 5300 kg *9650 kg 7650 kg *12950 kg 12300 kg
9' *9,500 lb 6,200 lb 14,000 lb 8,400 lb *17,700 lb 11,600 lb *21,300 lb 16,900 lb *28,600 lb 27,200 lb
1.5 m *4650 kg 2700 kg 6150 kg 3600 kg 8300 kg 4950 kg *11200 kg 7100 kg *15950 kg 11050 kg
4' *10,200 lb 6,000 lb 13,500 lb 7,900 lb 18,300 lb 10,900 lb *24,700 lb 15,600 lb *35,200 lb 24,400 lb
0 m 4800 kg 2700 kg 5950 kg 3450 kg 8000 kg 4650 kg 11450 kg 6600 kg *17250 kg 10250 kg
0' 10,600 lb 6,000 lb 13,100 lb 7,600 lb 17,600 lb 10,300 lb 25,200 lb 14,600 lb *38,000 lb 22,600 lb
–1.5 m 5100 kg 2900 kg 5850 kg 3350 kg 7750 kg 4450 kg 11100 kg 6300 kg *17250 kg 9850 kg *9750 kg *9750 kg *6900 kg *6900 kg
–4' 11,200 lb 6,400 lb 12,900 lb 7,300 lb 17,100 lb 9,900 lb 24,500 lb 13,900 lb *38,000 lb 21,800 lb *21,500 lb *21,500 lb *15,200 lb *15,200 lb
–3.0 m 5700 kg 3250 kg 5850 kg 3300 kg 7700 kg 4400 kg 11000 kg 6250 kg *16400 kg 9850 kg *15450 kg *15450 kg *9900 kg *9900 kg
–9' 12,600 lb 7,200 lb 12,800 lb 7,300 lb 17,000 lb 9,700 lb 24,300 lb 13,700 lb *36,200 lb 21,700 lb *34,100 lb *34,100 lb *21,800 lb *21,800 lb
–4.5 m 6950 kg 4000 kg 7800 kg 4500 kg *10900 kg 6350 kg *14500 kg 10050 kg *20000 kg *20000 kg *14850 kg *14850 kg
–14' 15,300 lb 8,800 lb 17,200 lb 9,900 lb *24,000 lb 13,900 lb *31,900 lb 22,200 lb *44,100 lb *44,100 lb *32,800 lb *32,800 lb
–6.0 m *6550 kg 5700 kg *8150 kg 6600 kg *11050 kg 10300 kg *14600 kg *14600 kg
–19’ *14,400 lb 12,600 lb *18,000 lb 14,600 lb *24,400 lb 22,700 lb *32,200 lb *32,200 lb
PC300LC-8 Arm: 3185 mm 10'5" Bucket: 1.40 m31.83 yd3SAE heaped Shoe: 700 mm 28” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *5300 kg 5200 kg *6850 kg 5650 kg
24' *11,700 lb 11,400 lb *15,200 lb 12,500 lb
6.0m *5250 kg 4150 kg *7250 kg 5600 kg
19' *11,600 lb 9,100 lb *16,000 lb 12,400 lb
4.5 m *5400 kg 3550 kg 6350 kg 3800 kg *7800 kg 5400 kg *9200 kg 7950 kg
14' *11,900 lb 7,900 lb 14,000 lb 8,400 lb *17,300 lb 11,900 lb *20,300 lb 17,500 lb
3.0 m 5600 kg 3250 kg 6200 kg 3700 kg 8450 kg 5100 kg *10650 kg 7400 kg *15000 kg 11750 kg
9' 12,300 lb 7,200 lb 13,700 lb 8,100 lb 18,700 lb 11,300 lb *23,500 lb 16,300 lb *33,100 lb 25,900 lb
1.5 m 5450 kg 3150 kg 6050 kg 3550 kg 8150 kg 4850 kg 11800 kg 6900 kg *16700 kg 10700 kg
4' 12,000 lb 6,900 lb 13,300 lb 7,800 lb 18,000 lb 10,600 lb 26,000 lb 15,200 lb *36,900 lb 23,600 lb
0 m 5550 kg 3200 kg 5900 kg 3400 kg 7950 kg 4600 kg 11400 kg 6550 kg *17550 kg 10200 kg
0' 12,200 lb 7,000 lb 13,100 lb 7,500 lb 17,500 lb 10,200 lb 25,100 lb 14,500 lb 38,600 lb 22,500 lb
–1.5 m 5950 kg 3400 kg 5850 kg 3350 kg 7800 kg 4500 kg 11200 kg 6400 kg *17000 kg 10100 kg *9600 kg *9600 kg
–4' 13,100 lb 7,500 lb 12,900 lb 7,400 lb 17,200 lb 9,900 lb 24,700 lb 14,100 lb *37,500 lb 22,200 lb *21,100 lb *21,100 lb
–3.0 m 6850 kg 3950 kg 7800 kg 4500 kg 11200 kg 6400 kg *15550 kg 10200 kg *18,050 kg *18050 kg
–9' 15,100 lb 8,700 lb 17,200 lb 10,000 lb 24,700 lb 14,100 lb *34,200 lb 22,500 lb *39,700 lb *39,700 lb
–4.5 m *7550 kg 5150 kg *9750 kg 6550 kg *12850 kg 10500 kg *16600 kg *16600 kg
–14' *16,600 lb 11,400 lb *21,500 lb 14,500 lb *28,400 lb 23,100 lb *36,600 lb *36,600 lb
–6.0 m *6300 kg *6300 kg *8150 kg *8150 kg
–19’ *13,900 lb *13,900 lb *18,000 lb *18,000 lb
LIFTING CAPACITY WITH LIFTING MODE
*Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
A: Reach from swing center
B: Bucket hook height
C: Lifting capacity
Cf: Rating over front
Cs: Rating over side
: Rating at maximum reach
A
B
C
13
PC300LC-8 Arm: 2550 mm 8'4" Bucket: 1.40 m31.83 yd3SAE heaped Shoe: 700 mm 28” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *7600 kg 6000 kg
24' *16,700 lb 13,200 lb
6.0m *7450 kg 4650 kg *7850 kg 5450 kg
19' *16,400 lb 10,300 lb *17,400 lb 12,000 lb
4.5 m 6650 kg 3950 kg *8300 kg 5250 kg *9900 kg 7700 kg *13000 kg 12400 kg
14' 14,600 lb 8,700 lb *18,400 lb 11,600 lb *21,900 lb 16,900 lb *28,600 lb 27,400 lb
3.0 m 6100 kg 3600 kg 6100 kg 3600 kg 8350 kg 5000 kg *11300 kg 7150 kg *15550 kg 11200 kg
9' 13,500 lb 7,900 lb 13,500 lb 7,900 lb 18,400 lb 11,000 lb *24,900 lb 15,800 lb *34,100 lb 24,700 lb
1.5 m 5950 kg 3450 kg 6000 kg 3500 kg 8050 kg 4750 kg 11550 kg 6700 kg
4' 13,100 lb 7,600 lb 13,200 lb 7,700 lb 17,800 lb 10,400 lb 25,500 lb 14,800 lb
0 m 6100 kg 3500 kg 5900 kg 3400 kg 7850 kg 4550 kg 11250 kg 6450 kg *14650 kg 10000 kg
0' 13,500 lb 7,800 lb 13,000 lb 7,500 lb 17,300 lb 10,100 lb 24,800 lb 14,200 lb *32,300 lb 22,100 lb
–1.5 m 6650 kg 3850 kg 7800 kg 4500 kg 11100 kg 6350 kg *16200 kg 10050 kg
–4' 14,700 lb 8,500 lb 17,200 lb 9,900 lb 24,500 lb 14,000 lb *35,700 lb 22,200 lb
–3.0 m 7900 kg 4550 kg 7850 kg 4550 kg *11050 kg 6400 kg *14250 kg 10250 kg *17150 kg *17150 kg
–9' 17,400 lb 10,100 lb 17,400 lb 10,100 lb *24,300 lb 14,100 lb *31,500 lb 22,600 lb *37,800 lb *37,800 lb
–4.5 m *7400 kg 6300 kg *8300 kg 6700 kg *11,050 kg 10450 kg *13100 kg *13100 kg
–14' *16,400 lb 13,900 lb *18,300 lb 14,700 lb *24,300 lb 23,100 lb *28,900 lb *28,900 lb
PC300LC-8 Arm: 2200 mm 7'3" Bucket: 1.40 m31.83 yd3SAE heaped Shoe: 700 mm 28” triple grouser
AMAX 9.0m 29' 7.5 m 24' 6.0 m 19' 4.5 m 14' 3.0 m 9'
BCf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.5 m *8650 kg 7050 kg
24' *19,100 lb 15,600 lb
6.0m *8300 kg 5300 kg *8200 kg 5350 kg *9100 kg 8050 kg
19' *18,300 lb 11,600 lb *18,100 lb 11,800 lb *20,100 lb 17,700 lb
4.5 m 7350 kg 4400 kg 8550 kg 5150 kg *10250 kg 7550 kg *13800 kg 12100 kg
14' 16,200 lb 9,700 lb 18,900 lb 11,400 lb *22,600 lb 16,700 lb *30,400 lb 26,700 lb
3.0 m 6700 kg 3950 kg 8250 kg 4900 kg *11550 kg 7050 kg
9' 14,800 lb 8,700 lb 18,200 lb 10,800 lb *25,500 lb 15,500 lb
1.5 m 6500 kg 3800 kg 8000 kg 4700 kg 11450 kg 6600 kg
4' 14,300 lb 8,300 lb 17,600 lb 10,300 lb 25,200 lb 14,600 lb
0 m 6700 kg 3850 kg 7850 kg 4500 kg 11150 kg 6350 kg
0' 14,700 lb 8,500 lb 17,300 lb 10,000 lb 24,600 lb 14,000 lb
–1.5 m 7350 kg 4250 kg 7800 kg 4500 kg 11100 kg 6300 kg *15500 kg 10100 kg
–4' 16,200 lb 9,400 lb 17,200 lb 9,900 lb 24,400 lb 13,900 lb *34,200 lb 22,200 lb
–3.0 m *8600 kg 5200 kg *10550 kg 6450 kg *13400 kg 10300 kg *14850 kg *14850 kg
–9' *19,000 lb 11,500 lb *23,300 lb 14,200 lb *29,600 lb 22,700 lb *32,700 lb *32,700 lb
–4.5 m *7750 kg *7750 kg *6550 kg *6550 kg *9850 kg *9850 kg
–14' *17,100 lb *17,100 lb *14,400 lb *14,400 lb *21,800 lb *21,800 lb