Konica Minolta accuriopress c6100 Original instructions

AccurioPress C6100/C6085 Contents-1
Contents
1Introduction
1.1 Welcome .......................................................................................................................................... 1-2
1.1.1 Configuration and Usage of this Guide.............................................................................................. 1-2
1.2 HTML User's Guide operating environment................................................................................. 1-3
Supported Operating Systems/Browsers.......................................................................................... 1-3
Display resolution............................................................................................................................... 1-3
1.3 How to display the top page of the HTML User's Guide............................................................. 1-4
In a Windows environment................................................................................................................. 1-4
In a Macintosh environment............................................................................................................... 1-4
1.4 Legal Restrictions on Reproduction ............................................................................................. 1-5
2 Safety Information
Warning and precaution symbols ...................................................................................................... 2-2
2.1 Warnings and Precautions ............................................................................................................. 2-3
2.1.1 Power Source Connection................................................................................................................. 2-3
2.1.2 Installation.......................................................................................................................................... 2-4
2.1.3 Using the Product .............................................................................................................................. 2-5
2.1.4 Consumables ..................................................................................................................................... 2-6
2.1.5 Glue Pellet.......................................................................................................................................... 2-7
2.1.6 Perfect Binder .................................................................................................................................... 2-7
2.1.7 Image Controller IC-313/Image Controller IC-315............................................................................. 2-8
2.1.8 Image Controller IC-314..................................................................................................................... 2-8
2.2 Regulation Notices.......................................................................................................................... 2-9
2.2.1 Laser Safety ....................................................................................................................................... 2-9
2.2.2 Ozone Release................................................................................................................................. 2-10
2.2.3 Electromagnetic Interference and Safety Approvals ....................................................................... 2-10
2.3 Warning and Caution Labels........................................................................................................ 2-13
2.3.1 Caution Labels on Conveyance Fixing Unit..................................................................................... 2-13
2.3.2 Warning Label on Waste Toner Box ................................................................................................ 2-15
2.3.3 Warning Label on Cyclone Box ....................................................................................................... 2-16
2.3.4 Warning and Caution Labels on Saddle Stitcher SD-513................................................................ 2-17
2.3.5 Caution Label on Perfect Binder PB-503......................................................................................... 2-20
2.3.6 Caution Labels on Finisher FS-532.................................................................................................. 2-21
2.3.7 Caution Labels on Output Tray OT-510........................................................................................... 2-23
2.3.8 Caution Labels on Relay Unit RU-518 / Humidifier HM-103 ........................................................... 2-24
2.3.9 Caution Labels on Multi Bypass Tray MB-508 ................................................................................ 2-25
2.3.10 Caution Labels on Large Capacity Unit LU-202XLm....................................................................... 2-26
2.3.11 Warning Label for Current Leakage on the Back of the Main Body ................................................ 2-27
2.3.12 Caution and Warning Labels on Auto Ring Binder GP-502............................................................. 2-28
2.3.13 Warning Labels for Grounding of the Main Body, Intelligent Quality Optimizer IQ-501,
Paper Feed Unit PF-711, Paper Feed Unit PF-707m, Saddle Stitcher SD-513,
and Relay Unit RU-518 ....................................................................................................................2-29
2.4 Operation Precautions.................................................................................................................. 2-32
2.4.1 Power Source .................................................................................................................................. 2-32
2.4.2 Operating Environment .................................................................................................................... 2-32
2.4.3 Storage of Printed Materials ............................................................................................................ 2-32
2.4.4 Ozone Release................................................................................................................................. 2-32
2.4.5 Direct Sunlight.................................................................................................................................. 2-32
2.4.6 Authentication Unit AU-201S........................................................................................................... 2-32
2.4.7 Data Stored in This Machine............................................................................................................ 2-32
2.4.8 Precaution for Use of Folding Unit, Finisher and Output Tray......................................................... 2-33

Contents-2 AccurioPress C6100/C6085
2.5 If you forget the administrator password ................................................................................... 2-34

1Introduction

Welcome
1
1-2 AccurioPress C6100/C6085
1.1
1Introduction
1.1 Welcome
Thank you for purchasing this machine.
This User’s Guide provides precautions and requests that should be followed to ensure safe usage of this
machine. Please be sure to read this guide before using the machine.
Please keep this manual in a safe place where you can access them easily.
1.1.1 Configuration and Usage of this Guide
The User's Guides for this machine consists of this guide, a booklet, and the HTML User's Guide included
in the User's Guide CD.
When you want to learn about detailed functions or operation procedures, refer to the HTML User's Guide
included in the User's Guide CD.
Note that basic technical knowledge about the machine is required to enable users to perform maintenance
work or troubleshooting operations. Maintenance and troubleshooting operations should be carried out as
instructed in this guide and the HTML User's Guide included in the User's Guide CD.
Should you experience any problems, contact your service representative.
Title of booklet manual Overview
[Safety Information] (This Guide) This guide provides precautions and requests that
should be followed to ensure safe usage of this ma-
chine.
Read this guide before using the machine.
[AccurioPress C6100/C6085 Additional Infor-
mation] (booklet)
This manual describes the changes in operation pro-
cedures and precautions for use which are required
due to the modification, as well as changed contents
of specifications.
Title of manual in User's Guide CD Overview
HTML User's Guide This manual describes the basic operations, functions
that enable more convenient operations, maintenance
procedures, simple trouble shooting operations, and
various setting methods of this machine.

AccurioPress C6100/C6085 1-3
1.2 HTML User's Guide operating environment 1
1.2 HTML User's Guide operating environment
Supported Operating Systems/Browsers
This guide describes the operation verification in the operating systems and browsers shown below.
Tips
-Check that [JavaScript] of your Web browser is enabled. The [HTML User's Guide] uses [JavaScript] for
the page display or search function.
-Note that some of the functions may not work normally depending on your system environment. Please
be forewarned.
-Problems may be able to be solved by using the latest Web browser.
Display resolution
1,024 e768 pixels or more
Operating system Web browser
Windows 7 (Service Pack 1) Internet Explorer 11.x
Firefox 50.x
Chrome 55.x
Windows 8.1 Internet Explorer 11.x
Firefox 50.x
Chrome 55.x
Windows 10 Internet Explorer 11.x
Microsoft Edge 25
Firefox 50.x
Chrome 55.x
Mac OS 10.8 Safari 6.x
Mac OS 10.9 Safari 7.x
Mac OS 10.10 Safari 8.x
Mac OS 10.11 Safari 9.x
Mac OS 10.12 Safari 10.x

How to display the top page of the HTML User's Guide
1
1-4 AccurioPress C6100/C6085
1.3
1.3 How to display the top page of the HTML User's Guide
In a Windows environment
When the User's Guide CD is inserted into the CD-ROM drive of your computer, an auto play message is
displayed. If you click [Run rundll32.exe], the top page is displayed.
If the top page is not displayed, open [Computer], right-click the [Users_Guide_CD] icon, then click [Open].
Double-click [index.html] in the folder to open the top page.
To open [Computer], perform the following procedure:
-Windows 10: From the [Start] menu, click [All Apps] - [System Tools] - [PC].
-Windows 8.1: In the Start window, click , then click [PC].
-Windows 7: Open the [Start] menu, then click [Computer].
In a Macintosh environment
Open the CD icon on the desktop, then double-click [index.html] to display the top page.
NOTICE
In Mac OS, the CD icon may not be displayed on the desktop even when the User's Guide CD is inserted
into the drive. In this case, the setting for displaying the icon on the desktop may be disabled. Check whether
or not the desktop display setting is disabled in "Preferences" of the Finder.

AccurioPress C6100/C6085 1-5
1.4 Legal Restrictions on Reproduction 1
1.4 Legal Restrictions on Reproduction
Certain types of originals must never be reproduced with the purpose or intent to pass reproductions of such
originals off as the originals.
The following is not a complete list, but is meant to be used as a guide to responsible reproduction.
<Financial Instruments>
-Personal checks
-Traveler’s checks
-Money orders
-Certificates of deposit
-Bonds or other certificates of indebtedness
-Stock certificates
<Legal Originals>
-Food stamps
-Postage stamps (canceled or uncanceled)
-Checks or drafts drawn by government agencies
-Internal revenue stamps (canceled or uncanceled)
-Passports
-Immigration papers
-Motor vehicle licenses and titles
-House and property titles and deeds
<General>
-Identification cards, badges, or insignias
-Copyrighted works without permission of the copyright
In addition, it is prohibited under any circumstances to reproduce domestic or foreign currencies, or works
of art without permission of the copyright owner.
When in doubt about the nature of an original, consult with legal counsel.
NOTICE
This machine provides the forgery prevention function in order to prevent financial instruments from being
reproduced illegally.
We appreciate your understanding that printed images may infrequently have some noise or image data may
not be stored under certain circumstances due to this forgery prevention function.

Legal Restrictions on Reproduction
1
1-6 AccurioPress C6100/C6085
1.4

2Safety Information

2
2-2 AccurioPress C6100/C6085
2 Safety Information
This section contains detailed instructions on the operation and maintenance of this machine. To achieve op-
timum utility of this device, all operators should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the supply. It contains important infor-
mation related to user safety and preventing equipment problems.
Make sure that you observe all of the precautions that appear in different sections of this manual.
KMI_Ver.03_E
dReference
Some parts of the contents of this section may not correspond with the purchased product.
Warning and precaution symbols
Be sure to observe the safety precautions.
-This manual contains the instructions that should be strictly observed at all times to prevent injury to
yourself and other persons as well as damage to property.
Injuries and damage that might be caused by using the product improperly are classified according to the
following symbols.
These are some of major exemplary graphical symbols.
Pictorial indication Description
Improper handling can cause serious injury or death.
Improper handling can cause minor injury or damage to houses
and property.
Graphic
symbols
Descriptions Graphic
symbols
Descriptions Graphic
symbols
Descriptions
General
prohibition
Do not
disassemble
Do not touch
General
instruction
Ground/Earth Unplug from
outlet
General
precaution
High
temperature
Electrical
shock hazard

AccurioPress C6100/C6085 2-3
2.1 Warnings and Precautions 2
2.1 Warnings and Precautions
2.1.1 Power Source Connection
Do not use any power cord other than the one supplied in the
package or attached on the products. If a power cord is not
supplied, use only the power cord and plug that are specified
in the user documentation. Failure to use this cord could re-
sult in a fire or electrical shock. If the power cord supplied in
the package cannot be used in the country where this prod-
uct was sold, use a power cord that meets the following con-
ditions or contact your Technical Representative.
• The power cord has voltage and current rating appropri-
ate for the rating plate on this machine.
• The power cord meets regulatory requirements for the ar-
ea.
• The power cord is provided with grounding pin/terminal.
Do not use the power cord to other products. Failure to do
that could result in a fire or electrical shock.
Do not scratch, abrade, place a heavy object on, heat, twist,
bend, step on, pull on, or damage the power cord. Use of a
damaged power cord (exposed core wire, broken wire, etc.)
could result in a fire or breakdown.
Should any of these conditions be found, immediately turn
OFF the power switch, unplug the power cord from the pow-
er outlet, and then call your authorized service representa-
tive.
Do not use the power source voltage other than being spec-
ified on the machine. Failure to do that could result in a fire or
electrical shock.
Do not use a multiple outlet adapter to connect any other ap-
pliances or machines.
Use of a power outlet for more than the marked current value
could result in a fire or electrical shock.
Do not use an extension cord. Use of an extension cord could
cause a fire or electric shock. If the power cord furnished with
the product is not long enough to be plugged into a wall out-
let, contact your Technical Representative.
Do not unplug and plug in the power cord with a wet hand,
as an electrical shock could result.
Plug the power cord all the way into the power outlet. Failure
to do this could result in a fire or electrical shock.
Make sure to ground this product. (Connect the power cord
to an electrical outlet that is equipped with a grounding ter-
minal.) Failure to do so and an unlikely event of leakage could
result in a fire or electrical shock.

Warnings and Precautions
2
2-4 AccurioPress C6100/C6085
2.1
2.1.2 Installation
The outlet must be near the equipment and easily accessible.
Otherwise you can not pull out the power plug when an emer-
gency occurs.
Do not place any objects around the power plug, as the pow-
er plug may be difficult to pull out when an emergency oc-
curs.
Do not tug the power cord when unplugging. Pulling on the
power cord could damage the cord, resulting in a fire or elec-
trical shock.
Remove the power plug from the outlet more than one time a
year and clean the area between the plug terminals. Dust that
accumulates between the plug terminals may cause a fire.
Keep this bag away from babies and children. Do not use in
cribs, beds, carriages, or playpens. The thin film may cling to
nose and mouth and prevent breathing. This bag is not a toy.
Do not place a flower vase or other container that contains
water, or metal clips or other small metallic objects on this
product. Spilled water or metallic objects dropped inside the
product could result in a fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign
matter get inside the product, immediately turn OFF the pow-
er switch, unplug the power cord from the power outlet, and
then call your Technical Representative or your authorized
service representative.
Make sure that the power cord is placed on a site in which no
person would step on or trip over it. Stepping on or tripping
over the power cord could heat the power cord, resulting in
a fire or electric shock.
<If instructed to use fixing legs>
When the product has been installed, fix the product using
the fixing legs. Not using the fixing legs could cause the prod-
uct to move or topple over.
Do not place the product in a dusty place, or a site exposed
to soot or steam, near a kitchen table, bath, or a humidifier.
A fire, electrical shock, or breakdown could result.
Do not place this product on an unstable or tilted bench, or
in a location subject to a lot of vibration and shock. It could
drop or fall, causing personal injury or mechanical break-
down.

AccurioPress C6100/C6085 2-5
2.1 Warnings and Precautions 2
2.1.3 Using the Product
Do not let any object plug the ventilation holes of this prod-
uct. Heat could accumulate inside the product, resulting in a
fire or malfunction.
Whenever moving this product, be sure to disconnect the
power cord and other cables. Failure to do this could damage
the cord or cable, resulting in a fire, electrical shock, or
breakdown.
When moving this product, always hold it at the locations
specified in the User’s Guide or other documents. If the unit
is moved while held at locations other than those specified, it
may fall, causing severe personal injury.
Do not modify this product, as a fire, electrical shock, or
breakdown could result. If the product employs a laser, the
laser beam source could cause blindness.
Do not attempt to remove the covers and panels which have
been fixed to the product. Some products have a high-volt-
age part or a laser beam source inside that could cause an
electrical shock or blindness.
Do not keep using this product, if this product becomes inor-
dinately hot or emits smoke, or unusual odor or noise. Imme-
diately turn OFF the power switch, unplug the power cord
from the power outlet, and then call your Technical Repre-
sentative or your authorized service representative. If you
keep on using it as is, a fire or electrical shock could result.
Do not keep using this product, if this product has been
dropped or its cover damaged. Immediately turn OFF the
power switch, unplug the power cord from the power outlet,
and then call your Technical Representative or your author-
ized service representative. If you keep on using it as is, a fire
or electrical shock could result.
Do not use flammable sprays, liquids, or gases inside or near
this machine. Do not clean the inside of this machine using a
flammable gas duster. A fire or explosion could result.
<If an RFID module (limited only to 13.56 MHz) for use in in-
side-the-machine proximity communication or electromag-
netic induction heating (IH) technology (limited only to 20.05
kHz to 100 kHz) is being used>
This machine generates a weak magnetic field.
If you experience any unusual symptoms with your implanta-
ble medical equipment (cardiac pacemaker, etc.) while near
the machine, move away from the machine and see a doctor
immediately.
Please call your Technical Representative or your authorized
service representative if you do not understand the pur-
chased product corresponds or not.
<If a non-contact IC card reader is being used>
If you use an implantable medical equipment (cardiac pace-
maker, etc.), do not bring the IC card reader close from the
implant within 12 cm at all times.
The radio waves may affect implantable medical equipment
(cardiac pacemaker, etc.) operations.

Warnings and Precautions
2
2-6 AccurioPress C6100/C6085
2.1
2.1.4 Consumables
Using this product in a poorly ventilated room for a long time
or producing a large volume of copies or prints may cause
the odor of exhaust air from the machine. Ventilate the room
well.
The inside of this product has areas subject to high temper-
ature, which may cause burns.
When checking the inside of the unit for malfunctions such as
a paper misfeed, do not touch the locations (around the fus-
ing unit, etc.) which are indicated by a "Caution HOT" caution
label. A burn could result.
Unplug the product when you will not use the product for
long periods of time.
When using the machine, do not look at the light of the lamp
for a prolonged time. Eyestrain could result.
Do not use stapled paper, conductive paper (such as silver
paper or carbon paper) or treated heat-sensitive/inkjet paper,
otherwise a fire may result.
Do not throw toner or a container that contains toner (e.g.,
toner cartridge, developing unit and Waste Toner Box) into an
open flame. The hot toner may scatter and cause burns or
other damage.
Do not leave toner-related parts (e.g., toner cartridge, devel-
oping unit and Waste Toner Box) within easy reach of chil-
dren. Licking any of these parts or ingesting toner could
damage your health.
Do not store toner-related parts (e.g., toner cartridge, devel-
oping unit and Waste Toner Box) near devices susceptible to
magnetism, such as precision equipment and data storage
devices, otherwise they may malfunction. They could cause
these products to malfunction.
Do not force open the toner-related parts (e.g., toner car-
tridge, developing unit and Waste Toner Box). If toner tum-
bles from the toner bottle, take utmost care to avoid inhaling
it or even getting skin contact.
If toner lands on your skin or clothing, wash thoroughly with
soap and water.
If you inhale toner, move to a place with fresh air and gargle
with a lot of water repeatedly. Should you get symptoms
such as coughing, seek medical advice.
If you get toner into your eyes, immediately rinse them with
running water for over 15 minutes. Seek medical advice if ir-
ritation persists.
If you swallow toner, rinse out your mouth and drink a few
glasses of water. Seek medical advice if necessary.

AccurioPress C6100/C6085 2-7
2.1 Warnings and Precautions 2
2.1.5 Glue Pellet
2.1.6 Perfect Binder
Never touch the electrical contacts of the units (e.g., toner
cartridge and developing unit), as an electrostatic discharge
may damage the product.
Before handling, see the user documentation for the safety
information.
<If instructed to replace the fusing unit>
The fusing section is extremely hot. Before replacing the fus-
ing unit, be sure to open doors and covers of the machine.
Then, leave the machine to stand idle for a specified period
of time and make sure that the fusing section has cooled
down to room temperature. Failure to follow these instruc-
tions could result in a burn.
Do not put glue pellets close to fire. Glue pellets are flamma-
ble and easy to catch on fire.
Do not swallow glue pellets. Should you swallow any, drink
large amount of water or milk to vomit, and immediately con-
sult a doctor.
Keep out of reach of children in order to avoid unexpected
accidents.
Do not use the perfect binder without ventilation for an ex-
tended period of time. Ensure to ventilate the room on a reg-
ular basis. It is recommended that the perfect binder should
be installed in a place with a local exhaust system. Using the
perfect binder in a room without appropriate ventilation could
pose health hazard.
Handle melted hot glue carefully. If it gets in the eye, do not
rub nor tray to open the eye, but cool it with cold water im-
mediately and consult a doctor.
Do not touch melted hot glue as it may cause burn injury. If it
sticks on your skin, cool that part of the skin with cold water
immediately and consult a doctor.
Do not touch the glue tank unit immediately after you turned
off the machine to avoid burn injury. Wait until the unit is no
longer hot when you handle it directly with your hands.
Do not put the glue hopper and the glue tank unit close to fire.
Glue is flammable and easy to catch on fire.
Do not get close to the vapor emitted from melted hot glue.
If you have irritation in or around your eyes, nose or throat,
move to an area where you can get fresh air.
Do not block up the vent for the fan on the back of the perfect
binder. This will prevent the discharge of heat, and may
cause fire or breakdown.
Do not change the temperature setting for the glue tank unit.
This may cause fire or breakdown.

Warnings and Precautions
2
2-8 AccurioPress C6100/C6085
2.1
2.1.7 Image Controller IC-313/Image Controller IC-315
2.1.8 Image Controller IC-314
Never lift the Image Controller IC-313 or Image Controller IC-
315 by grasping the top panel. The top panel does not sup-
port the weight of the system.
The Image Controller IC-313 or Image Controller IC-315
touch panel is a liquid crystal display (LCD) that is made of
glass and can break. Do not subject it to strong shocks. If the
Image Controller IC-313 or Image Controller IC-315 touch
panel breaks and the liquid crystal material leaks out, do not
inhale, ingest, or touch it. If the material gets on your skin or
clothing, wash it off with soap and water immediately.
Do not attempt to disassemble or modify the Image Control-
ler IC-313 or Image Controller IC-315. This may result in a fire
or electrical shock.
Do not keep using the Image Controller IC-313 or Image
Controller IC-315 if the Image Controller IC-313 or Image
Controller IC-315 becomes inordinately hot, emits smoke,
unusual odor, or noise. Immediately turn off the power
switch, unplug the power cord from the power outlet, and call
your authorized service representative.
Do not apply excessive pressure to the panel. This changes
the color of the panel.
The Image Controller IC-314 is heavy, and must be lifted by
two people.
Each person must place both hands underneath the Image
Controller IC-314 from the sides.
Lift up the Image Controller IC-314 using the handle and not
using the front panel. Lifting it up using the front panel may
result in major injury.
Before opening the Image Controller IC-314 covers, ensure
that the unit has been switched off. Switching off only the
ON/OFF power button will leave some circuits energized. For
complete disconnection from the supply, the main power ca-
ble must also be disconnected from the power source.
Do not attempt to disassemble or modify the Image Control-
ler IC-314. This may result in a fire or electrical shock.
Do not keep using the Image Controller IC-314 if the Image
Controller IC-314 becomes inordinately hot, emits smoke,
unusual odor, or noise. Immediately turn off the power
switch, unplug the power cord from the power outlet, and call
your authorized service representative.

AccurioPress C6100/C6085 2-9
2.2 Regulation Notices 2
2.2 Regulation Notices
2.2.1 Laser Safety
This product employs a Class 3B laser diode having maximum power of 15 mW and wavelength of 785-800
nm.
This product is certified as a Class 1 laser product. Since the laser beam is concealed by protective housings,
the product does not emit hazardous laser radiation as long as the product is operated according to the in-
structions in this manual.

Regulation Notices
2
2-10 AccurioPress C6100/C6085
2.2
2.2.2 Ozone Release
During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone
adversely. However, be sure the room where the machine is being used has adequate ventilation, especially
if you are printing a high volume of materials, or if the machine is being used continuously over a long period.
2.2.3 Electromagnetic Interference and Safety Approvals
This product must be used with a shielded network cable and shielded USB cable.
The length of USB cable must be 3 meters or less.
The use of such cables is likely to result in interference with radio communications.
WARNING:
This is a Class A product. This product must not be used in residential areas. In a residential environment this
product may cause radio interference in which case the user may be required to take adequate measures.
For European Users
CE Marking (Declaration of Conformity) for users of the European Union (EU) Declaration of Conformity is
available at " http://www.konicaminolta.eu/".
This product complies with IEC61000-3-12.
This product is GS-certified for the Konica Minolta branded model Accu-
rioPress C6100 and AccurioPress C6085.
For German Users
Der Höchste Schalldruckpegel beträegt 85 dB(A) oder weniger nach ISO
7779.
This device is not intended for use in the direct field of view at visual display workplaces.
To avoid incommoding reflexions at visual display workplaces this device must not be placed in the direct
field of view.
For U.S.A and Canada Users
This product is cTUVus-certified for the Konica Minolta branded model AccurioPress C6100 and Accurio-
Press C6085.
Notification for California Customers
This product uses a CR Lithium Battery which contains perchlorate material.
This perchlorate warning applies to perchlorate-containing lithium batteries sold or distributed in California,
USA.
"Perchlorate Material - Special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate."
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area is likely to cause harmful in-
terference in which case the user will be required to correct the interference at his own expense.
WARNING:
The design and production of this unit conform to FCC regulations, and any changes or modifications must
be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user with-
out first contacting the manufacturer will be subject to penalty under FCC regulations.
This device must be used with a shielded network cable and a shielded USB cable. The use of non-shielded
cables is likely to result in interference with radio communications and is prohibited under FCC rules.

AccurioPress C6100/C6085 2-11
2.2 Regulation Notices 2
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 5) (For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
This device complies with Canadian RSS-Gen.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of this de-
vice.
Cet appareil est conform à la norme CNR-Gen du Canada.
L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit pas produire
de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
For Users in countries not subject to Class B regulations
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
This device must be used with a shielded network (10 Base-T/100 Base-TX) cable and a shielded parallel ca-
ble. The use of non-shielded cables is likely to result in interference with radio communications and is pro-
hibited under CISPR rules and local rules.
LED radiation safety
This product is a machine which operates by means of a LED (light emitting diodes) exposure system. There
is no possibility of danger from the LED optical radiation, because the LED optical radiation level does not
exceed the accessible radiation limit of class 1 under all conditions of operation, maintenance, service and
failure.
This symbol means: Do not dispose of this product together with your household
waste!
Please refer to the information of your local community or contact our dealers re-
grading the proper handling of end-of-life electric and electronic equipments. Re-
cycling of this product will help to conserve natural resources and prevent
potential negative consequences for the environment and human health caused
by inappropriate waste handling.