Konica Minolta bizhub PRO 950 Series User manual

bizhub PRO 950 Contents-1
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual before using the machine. After reading the manual, store
it in the designated holder so that it can easily be referred to when questions
or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
FEDERAL OR STATE STATUTES MAY PROHIBIT THE COPYING OF CER-
TAIN DOCUMENTS OR INFORMATION, RESULTING IN FINES OR IMPRIS-
ONMENT FOR VIOLATORS.
ACKNOWLEDGEMENTS:
-KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of im-
aging are registered trademarks or trademarks of KONICA MINOLTA
HOLDINGS, INC.
-bizhub is registered trademark of KONICA MINOLTA BUSINESS TECH-
NOLOGIES, Inc.
Copyright © 2008 KONICA MINOLTA BUSINESS TECHNOLOGIES, Inc.
EXEMPTION
-No part of this manual may be used or duplicated without permission.
-Manufacturer and Sales Company will have no liability for any influences
caused by using the printing system and this User’s Guide.
-The information written in this User’s Guide is subject to change without
prior notice.

Contents-2 bizhub PRO 950
Contents
Introduction
Contents
Energy Star®
Available Features
Composition of User’s Guide
Legal Restrictions on Copying
1 Precautions for Installation and Use
1.1 Safety Information .............................................................................1-2
1.2 Regulation Notices ............................................................................1-9
1.3 Caution Labels and Indicators .......................................................1-13
1.4 Installation Space ............................................................................1-15
1.5 Operation Precautions ....................................................................1-17
2 Preparation for Use
2.1 Machine Configuration ......................................................................2-2
2.2 Turning On/Off the Power Switch ..................................................2-22
2.3 Automatically Resetting the Copy Conditions: Auto Reset Setting ..2-26
2.4 To Use Machine When Power Save LED Lights ...........................2-27
2.4.1 Automatically Conserving Energy: Auto Low Power ....................2-28
2.4.2 Automatically Conserving Energy: Auto Shut Off .........................2-29
2.4.3 Manually Conserving Energy ........................................................2-30
2.4.4 Limiting Machine Usage: Weekly Timer ........................................2-31
2.5 Making User Authentication ...........................................................2-33
3 Paper and Original Information
3.1 Paper Information ..............................................................................3-2
3.1.1 Paper Weight ..................................................................................3-2
3.1.2 Paper Tray/ Exit Tray Capacity .......................................................3-4
3.1.3 Paper Size .......................................................................................3-7
3.1.4 Special Paper in Bypass Tray .......................................................3-12
3.1.5 Auto Tray Switch Function ............................................................3-13
3.1.6 To Store Copy Paper ....................................................................3-13
3.2 Original Information ........................................................................3-14

bizhub PRO 950 Contents-3
3.2.1 Using Original Glass ..................................................................... 3-14
3.2.2 ADF Originals ............................................................................... 3-15
4 Supplies & Handling
4.1 Loading Paper ................................................................................... 4-2
4.1.1 Loading Paper in Main Body Trays (Tray 1 to 3) ............................ 4-3
4.1.2 Loading Paper in Bypass Tray ....................................................... 4-5
4.1.3 Loading Paper in Large Capacity Unit (Tray 4) .............................. 4-7
4.2 Loading Tabbed Sheets ................................................................. 4-11
4.2.1 Loading Tabbed Sheets in Main Body Trays (Tray 1 to 3) ........... 4-11
4.2.2 Loading Tabbed Sheets in Large Capacity Unit (Tray 4) ............. 4-12
4.2.3 Loading Tabbed Sheets in Bypass Tray ...................................... 4-14
4.3 Adding Toner ................................................................................... 4-15
4.4 Replenishing Staple Supply ........................................................... 4-19
4.4.1 Replenishing Staple Supply in Finisher FS-528 ........................... 4-19
4.4.2 Replenishing Staple Supply in Finisher FS-611 ........................... 4-23
4.5 Emptying Scrap Box of Punch Kit ................................................. 4-27
4.6 Emptying Scrap Box of Z Folding Unit ......................................... 4-29
4.7 Emptying Scrap Box of Trimmer Unit ........................................... 4-31
5 Troubleshooting
5.1 If “Please Call Service C-####” Message Is Displayed ................. 5-2
5.2 Clearing Mishandled Paper ............................................................. 5-4
5.3 If [MACHINE] Tab Flashes in Orange ............................................ 5-47
5.3.1 Paper Misfeed .............................................................................. 5-47
5.3.2 Tray Empty ................................................................................... 5-48
5.3.3 Inconformity in Paper Setting ...................................................... 5-49
5.4 If “Memory Full” Message Is Displayed: Memory Overflow ....... 5-51
5.5 If Power Off/On Screen Is Displayed ............................................ 5-54
5.6 If No Response Screen Is Displayed ............................................. 5-56
5.7 Troubleshooting Tips ..................................................................... 5-58
6 Maintenance

Contents-4 bizhub PRO 950
6.1 Cleaning Image Scanning Section ...................................................6-2
6.2 Checking Copy Count .......................................................................6-4
6.3 Preventive Maintenance ...................................................................6-7
7 Specifications
7.1 Main Body Specifications .................................................................7-2
7.1.1 Main Body .......................................................................................7-2
7.1.2 ADF .................................................................................................7-3
7.2 Option Specifications ........................................................................7-4
7.2.1 Finisher FS-528 ...............................................................................7-4
7.2.2 Finisher FS-611 ...............................................................................7-5
7.2.3 Punch Kit PK-505 ...........................................................................7-6
7.2.4 Post Inserter PI-506 ........................................................................7-6
7.2.5 Large Capacity Unit LU-407 ...........................................................7-7
7.2.6 Large Capacity Unit LU-408 ...........................................................7-7
7.2.7 Z Folding Unit ZU-607 ....................................................................7-8
7.2.8 Trimmer Unit TU-502 ......................................................................7-9
8 Before Making Copies
8.1 How to Make a Basic Copy ..............................................................8-2
8.2 Positioning the Original .....................................................................8-7
8.2.1 Positioning Originals in the ADF .....................................................8-7
8.2.2 Positioning the Original on Original Glass ....................................8-11
8.3 Setting Print Quantity ......................................................................8-12
8.4 Setting Job During Warmup ...........................................................8-14
8.5 To Stop Scanning/Printing .............................................................8-17
9 Basic Job Settings
9.1 Function Key ......................................................................................9-2
9.2 Original Setting ..................................................................................9-4
9.2.1 Specifying Orientation of the Original: Direction .............................9-4
9.2.2 Selecting Binding Direction of the Original: Bind Direction ............9-6
9.2.3 Copying Mixed Size Originals: Mixed .............................................9-8
9.2.4 Copying Z-Folded Original: Z-Folded Original ..............................9-10
9.2.5 Feeding Single Original from ADF: Single Feed ............................9-11

bizhub PRO 950 Contents-5
9.2.6 Copying Non-Standard Size Original: Custom Size .................... 9-14
9.2.7 Copying Tabbed Originals: Tab Paper Size ................................. 9-16
9.3 Separate Scan Mode ...................................................................... 9-18
9.4 Quality Adjustment ......................................................................... 9-21
9.4.1 Selecting Exposure Level and Adjusting Background Whiteness:
Density, Background Removal ..................................................... 9-21
9.4.2 Making Copy Quality Closer to the Original: Original Type ......... 9-24
9.5 Zoom ................................................................................................ 9-26
9.5.1 Copying in 1.000 Magnification Mode ......................................... 9-26
9.5.2 Changing Magnification Ratio ...................................................... 9-27
9.5.3 Setting Magnification Ratio Automatically: Auto Zoom ............... 9-30
9.6 Simplex/Duplex Setting .................................................................. 9-31
9.6.1 Making Double-Sided Copies Using ADF .................................... 9-31
9.6.2 Making Double-Sided Copies Using Original Glass .................... 9-34
9.6.3 Making Single-Sided Copies from Double-Sided Originals ......... 9-38
9.7 Paper Setting .................................................................................. 9-40
9.7.1 Selecting Paper Size Automatically: Auto Paper ......................... 9-41
9.7.2 Turning On/Off the Image Rotation .............................................. 9-43
9.7.3 Using Paper Not Specified to Any Tray: Paper Setting ............... 9-45
9.8 Setting Reserve Job ....................................................................... 9-58
10 Application Functions
10.1 To Use Application Function ......................................................... 10-2
10.2 Inserting Sheets and Covers: Insert Sheet ................................... 10-6
10.3 Locating Title Pages on the Right Side: Chapters ..................... 10-14
10.4 Lay Out Several Pages onto One Sheet: Combine Originals .... 10-18
10.5 Making a Multiple Page Signature Booklet: Booklet ................. 10-22
10.6 Copying onto Transparent Films: OHP Interleave ..................... 10-25
10.7 Inserting Different Original Images into Printed Sets:
Insert Image .................................................................................. 10-29
10.8 Dividing Spread Image into Right and Left Pages: Book Copy 10-33
10.9 Programing Different Settings for an Output Job:
Program Job ................................................................................. 10-38
10.10 Erasing Outside Area of Original: Non-Image Area Erase ........ 10-42
10.11 Reversing Color in Image: Neg-/Positive Reverse .................... 10-44
10.12 Repeating Original Image on One Sheet: Image Repeat .......... 10-46

Contents-6 bizhub PRO 950
10.12.1 Setting Repeat Times Automatically ...........................................10-46
10.12.2 Specifying Repeat Times: Repeat ..............................................10-50
10.13 Eliminating Copy Marks Along Borders: Frame Center Erase ..10-53
10.14 Copying Image in the Center of Copy Paper: Image Centering 10-57
10.15 Printing Images Fully to the Edges: All-Image Area ...................10-59
10.16 Adjusting Position of Copy Image: Page Margin - Shift ............10-60
10.17 Reducing Images to Create Binding Margin:
Page Margin - Reduce & Shift .......................................................10-66
10.18 Printing Additional Information: Stamp/Overlay .........................10-69
10.18.1 Printing Stamp onto Copies: Preset Stamp ................................10-71
10.18.2 Printing Distribution Number: Set Numbering ............................10-73
10.18.3 Printing Page Number: Page No. ................................................10-75
10.18.4 Printing Date/Time: Date/Time ....................................................10-77
10.18.5 Printing Watermark onto Copies: Watermark .............................10-79
10.18.6 Printing Distribution Number as Watermark: Set Numbering .....10-81
10.18.7 Detailed Setting in Stamp/Watermark ........................................10-83
10.19 Print Words, Date/Time, Annotation Number onto Copies:
Annotation ......................................................................................10-88
10.20 Overlaying Image onto Printed Pages: Overlay ..........................10-92
10.21 Storing Overlay Image in HDD/ Overlaying Image Stored in HDD:
Register Overlay ............................................................................10-94
11 Output Setting
11.1 Setting Binding Direction for Duplex Copies ................................11-2
11.2 Sorting/Grouping/Stapling Copies .................................................11-4
11.2.1 Sort/ Group/ Offset Sort/ Offset Group Output to the Primary (Main)
Tray ...............................................................................................11-7
11.2.2 Stapling Output to the Primary (Main) Tray ..................................11-8
11.2.3 Sort/ Group Output to the Secondary (Sub) Tray .......................11-10
11.3 Making Folded Booklet:
Multi Half Fold/ Fold & Staple/ Trimming .....................................11-12
11.4 Folding Copies in Three: Multi Tri-Fold .......................................11-14
11.5 Output Z-Folded Copies: Z-Fold ..................................................11-16
11.6 Punching File Holes in Copies: Punch .........................................11-18
11.7 Cover Sheet Feeding: Post Inserter .............................................11-21
11.8 Using Finisher Manually ................................................................11-23

bizhub PRO 950 Contents-7
11.9 Using Two Copiers in Tandem .................................................... 11-26
11.9.1 Using Tandem Mode .................................................................. 11-27
11.9.2 To Stop Scanning/Printing ......................................................... 11-31
11.9.3 Troubleshooting ......................................................................... 11-32
12 Job Management
12.1 Overview of the Job List Screen ................................................... 12-2
12.2 Job Operation on Job List Screen ................................................ 12-3
12.2.1 Checking/Controlling Reserved Jobs .......................................... 12-3
12.2.2 Displaying Output History ............................................................ 12-5
12.2.3 Displaying Send History ............................................................... 12-6
12.2.4 Checking Incomplete Jobs .......................................................... 12-7
12.2.5 Checking/Operating Suspended Jobs ......................................... 12-8
12.2.6 Checking/Controlling Spool Jobs .............................................. 12-10
13 Advanced Information
13.1 Checking Feature Selections by Proof Copying .......................... 13-2
13.2 Checking Feature Selections Before Copying: Check Mode ..... 13-4
13.3 Interrupt Copying ............................................................................ 13-8
13.4 Storing and Recalling Job Conditions: Mode Memory ............. 13-10
13.4.1 Storing Job Conditions .............................................................. 13-10
13.4.2 Recalling Stored Job Settings ................................................... 13-13
13.4.3 Recalling Previous Job Settings ................................................ 13-15
13.5 Displaying Screen for Operation Guide: Help Mode ................. 13-16
13.6 Adjusting Response Time of Touch Keys: Accessibility ........... 13-18
13.7 Controlling/Monitoring Copier from Browser: Remote Panel .. 13-19
13.7.1 Controlling Copier from Browser: Remote Panel ....................... 13-20
13.7.2 Monitoring Copier from Browser: Remote Monitor .................... 13-22
13.7.3 Monitoring Copier from Browser: Multi Monitor ........................ 13-23
14 Index

Contents-8 bizhub PRO 950
Energy Star®
The ENERGY STAR®Program has been established to encourage the wide-
spread and voluntary use of energy efficient technologies that reduce energy
consumption and prevent pollution.
As an ENERGY STAR Partner, we have determined that this product meets
the ENERGY STAR guidelines for energy efficiency, based on the following
features.
Auto Low Power
This function conserves energy by lowering the set temperature of the fixing
unit. In the standard setting, Auto Low Power operates automatically when
15 minutes have elapsed after completion of the last copy, with the copier
remaining in the ready to copy state during that time.
The time period for the Auto Low Power function can be set for 1 minute, 3
minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 min-
utes, 120 minutes, or 240 minutes. This function can be disabled in the Utility
mode.
Auto Shut Off
This function achieves further energy conservation by partially turning the
power supply OFF. In the standard setting, Auto Shut Off follows Auto Low
Power, operating automatically when 60 minutes have elapsed after comple-
tion of the last copy, with the copier remaining in the ready to copy state dur-
ing that time. The time period for the Auto Shut Off function can be set for 1
minute, 3 minutes, 5 minutes, 10 minutes, 15 minutes,30 minutes, 60 min-
utes, 90 minutes, 120 minutes or 240 minutes. This function can be disabled
in the Utility mode.
Automatic Duplex Copying
To reduce paper consumption, use this function to make double-sided (du-
plex) copies automatically.

bizhub PRO 950 Contents-9
Combine Originals
To reduce paper consumption, use this function to copy a fixed number (2,
4, or 8) of original pages onto one sheet of copy paper.
We recommend that you utilize the Auto Low Power, Auto Shut Off, Auto-
matic Duplex Copying, and Combine Originals functions.

Contents-10 bizhub PRO 950
Available Features
Accessibility
Sets the response time of the touch keys.
AES (Automatic Exposure Selection)
Automatically adjusts exposure to compensate for quality of the original.
All-Image Area
Makes copies printed completely to the edges to avoid image loss.
Annotation
Allows you to register words, current date/time, and annotation number as a
set and to print it onto output copies at the location designated on the screen
Auto Zoom
Automatically selects an appropriate magnification ratio when paper size is
selected manually. Automatically selected when [Auto Zoom] is touched.
Auto Paper
Automatically selects paper size to match the original documents.
Auto Low Power
Automatically lowers the power after a specified period of copier inactivity.
Auto Reset
Automatically resets to the default settings after a specified period of copier
inactivity.
Auto Shut Off
Automatically shuts off the power after a specified period of copier inactivity.
Background Removal
Manually selects a background exposure level using [Lighter], [Std.], and
[Darker] keys provided on the Quality Adjustment Screen.
Bind Direction in Original Setting
Makes normal copies from double-sided originals being upside-down on the
reverse side.

bizhub PRO 950 Contents-11
Bind Direction in Output Setting
Makes double-sided copies upside-down on the reverse side from normal
originals.
Book Copy
Copies both pages of an open book or book-size sheet separately onto two
letter sheets in 1-1 mode or separately onto each side of one letter sheet in
1-2 mode. You can use the Book Copy mode with the Front Cover or
Front/Back Cover mode. The cover page(s) will be scanned and copied nor-
mally before image division is performed on the other pages.
Booklet
Creates a multiple page signature booklet copied on both sides of paper in
1-2 or 2-2 (duplex) copy mode.
Chapters
Starts chapter pages on the right side (front pages) of the finished document.
Only duplex mode (1-2 or 2-2) is compatible with this feature.
Check Mode
To check the job settings before running multiple copies, press [Mode
Check] on the control panel to display the Check Screen.
Combine Originals
Copies a fixed number (2, 4, or 8) of pages onto one sheet of copy paper to
create a draft copy of a multi-page report at the same time as saving paper.
Copy Density (Lighter, Std., Darker)
Using [Lighter], [Std.], and [Darker] keys, manually selects a desired expo-
sure level from 9 levels.
Cover Sheet Feeding (Finisher FS-528/FS-611 with Post Inserter PI-506)
Attaches thick covers or insertions to printed sheets.
Custom Size in Original Setting
Identifies a special original size which cannot be detected normally, in order
to select the optimal paper size for copying or printing.
Fold & Staple with Trimming (Finisher FS-611 with Trimmer Unit TU-502)
Folds and staples printed sheets in the center to make a booklet. Use Trim-
ming to trim the end of booklets.

Contents-12 bizhub PRO 950
Frame Center Erase
Erases border and/or fold image area using Frame Erase (1–300 mm for all
sides/ each side), Center Erase (1–99 mm), or both in combination.
Help
Provides you with the information about machine functions, job setting pro-
cedure, and various machine operations on the Help Screen.
Hole-Punch (Finisher FS-528/FS-611 with Punch Kit PK-505, Z Folding
Unit ZU-607)
Makes file holes in printed sheets.
Image Centering
The original image on the original glass or in the document feeder is copied
and centered on a sheet.
Image Repeat
Repeats an original image area (specified manually or detected automatical-
ly) down the page.
Insert Image
Inserts the pages scanned from the original glass into a document scanned
from the document feeder in order to output them together as a set.
Insert Sheet
Inserts blank or copied sheets from any tray, and/or inserts blank or copied
front and back covers from any tray to enhance the presentation of multi-
page documents.
Interrupt Copying
Interrupts copying-in-progress to make an urgent copy, using any of copier
features for the interrupt job.
Job List
Displays the Job List Screen to view the output/send history of jobs, to check
incomplete/suspended jobs, and to manage spool/reserved jobs.
Manual Finishing (Finisher FS-528/FS-611 with Post Inserter PI-506)
Manually staples/punches/folds paper sets without printing.

bizhub PRO 950 Contents-13
Manual Shut Off
Shuts off the machine power when [Power Save] on the control panel is
pressed.
Mixed in Original Setting
Copies mixed size originals from the document feeder using Auto Paper or
Auto Zoom function. Auto Paper automatically selects the same paper size
as each original, while Auto Zoom allows you to select one paper size for all
originals.
Mode Memory
Programs up to 30 jobs and recalls each job by job number, as needed. The
Mode Memory Screen also allows you to recall the last-completed output job
settings by touching [Pre-Job Recall].
Multi Half Fold with Trimming (Finisher FS-611 with Trimmer Unit TU-
502)
Folds printed sheets in the center to make a booklet. Use Trimming to trim
the end of booklets.
Multi Tri-Fold (Finisher FS-611)
Folds printed sheets in three.
Neg-/ Positive Reverse
Reverses the image from black-on-white to white-on-black or vice versa.
Non-Image Area Erase
Automatically detects the original size placed on the original glass to copy
only the image area, eliminating the exposed area of the original glass.
OHP Interleave
Copies onto OHP transparencies and interleaves blank or copied paper for
each original copied.
Original Type
Enhances photo image in Photo mode, regular image in Text/Photo mode,
text image in Text mode, lighter image in Dot Matrix mode.
Overlay
Scans an original image and overlays it on all pages of another document
subsequently scanned or previously stored.

Contents-14 bizhub PRO 950
Page Margin
Creates or removes a binding margin at the top, bottom, right and left edges
(shift amount from 0–250 mm, in 1 mm increments); reduces image to pre-
vent image loss (reduce & shift amount from 0–250 mm, in 1 mm increments).
Paper Setting
Temporarily changes the setting of the tray to be used, in order to use anoth-
er paper than loaded in the tray.
Power Save
Automatically turns off all but nominal power supply after a specified period
of copier inactivity, for optimal efficiency. Power is returned after a brief
warm up period by pressing [Power Save] on the control panel.
Program Job
Scans documents into memory while specifying different copy conditions for
each original, then prints all the documents collectively.
Proof Copy
To ensure correct output before running multiple copies, run a proof copy by
pressing [Proof Copy] on the control panel or touching [Proof Copy] on the
Check Screen.
Reserve
Scans in subsequent copy jobs while the machine is busy printing or copy-
ing.
Rotation
Rotates the image before copying when the portrait/landscape orientation of
the original is different from the orientation of the copy paper. To deactivate
this function, touch [Image Rotation Off] on the Copy Screen.
Simplex/Duplex
Selects the desired simplex mode (1-1 or 2-1); or duplex mode (1-2 or 2-2).
Single Feed
Sets the document feeder to accept thick originals or paste-ups to be fed
one sheet at a time.

bizhub PRO 950 Contents-15
Stamp
Imprints a stamp (Preset Stamp, Set Numbering, Page No., Date/Time) and
watermark (Watermark, Set Numbering) onto output copies to enhance the
presentation and usefulness of the copies.
Staple
Selects a stapling position and number of staples.
Tab Paper
Copies onto tabbed sheets from tabbed originals, allowing the image on the
tab part of the original to be printed on the same part of the tabbed copy pa-
per.
Tandem Mode
Works in tandem to distribute a large copying job in half the time of non-tan-
dem mode.
When using the tandem mode, contact your representative.
Weekly Timer
Can be set according to the needs of each work environment. Turns main
body power Off/On daily or weekly, during lunch time, on holidays, and also
enables the Timer Interrupt mode, which allows temporary use of the ma-
chine even when the machine is in the daily, weekly, or holiday Off mode.
Z-Fold in Output Setting (Z Folding Unit ZU-607)
Makes zigzag-folded copies.
Z-Folded Original in Original Setting
This feature sets the document feeder to accept z-folded originals.
Zoom
Selects fixed ratios, four reduction, four enlargement, and three preset ratios.
Zoom ratios can be selected from 25% to 400% in 0.1% increments. Vertical
and horizontal dimensions can be reduced or enlarged independently.

Contents-16 bizhub PRO 950
Composition of User’s Guide
This machine is provided with the following user's guides.
User's Guide - Copier <This book> (Printed matters), (User’s Guide CD)
This guide describes an outline of the machine and copy operations.
Please refer to this guide for safety information, turning on/off the machine,
paper supply, dealing with machine trouble such as paper jam, and copy op-
eration available on the machine.
User's Guide - POD Administrator's Reference
(Printed matters), (User’s Guide CD)
This guide provides you with detailed information about the machine man-
agement and how to customize the machine according to your daily use.
Please refer to this guide for a setup and management of the machine includ-
ing registration of copy paper, tray setting, and a network setup.
User's Guide - Network Scanner (Printed matters), (User’s Guide CD)
This guide describes the operation of the network scanner function equipped
for the machine as standard.
Please refer to this guide for full information on reading data or storing data
(Scan to HDD, Scan to E-Mail, Scan to FTP, Scan to SMB).
User's Guide - Security (Printed matters), (User’s Guide CD)
This guide describes the security functions.
Please refer to this guide for how to use the Enhanced Security mode, and
for detailed machine operation in Enhanced Security mode.
User's Guide - Printer (User’s Guide CD)
This guide describes the operation of the printer function equipped for the
machine.
Please refer to this guide for how to use PCL driver, Adobe PS driver and Pa-
geScope Web Connection in user mode.
User's Guide - Plug-in Driver (User’s Guide CD)
This guide describes the operation of the printer function equipped for the
machine.
Please refer to this guide for how to use Plug-in driver in user mode.

bizhub PRO 950 Contents-17
Quick Guide - Printer (Printed matters)
The descriptions given in this manual are excerpts from the installation sec-
tion of the User's Guide (Printer).

Contents-18 bizhub PRO 950
Legal Restrictions on Copying
Certain types of original must never be copied with the purpose or intent to
pass copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to
responsible copying.
<Financial Instruments>
-Personal checks
-Traveler’s checks
-Money orders
-Certificates of deposit
-Bonds or other certificates of indebtedness
-Stock certificates
<Legal Documents>
-Food stamps
-Postage stamps (canceled or uncanceled)
-Checks or drafts drawn by government agencies
-Internal revenue stamps (canceled or uncanceled)
-Passports
-Immigration papers
-Motor vehicle licenses and titles.
-House and property titles and deeds
<General>
-Identification cards, badges, or insignias
-Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to copy domestic or for-
eign currencies, or works of art without permission of the copyright owner.
When in doubt about the nature of a document, consult with legal counsel.
This machine provides the section management function to forbid the user
operating the machine without entering a pre-established password, in order
to prevent any misapplication of the machine.
Also, this section management function can limit the machine operation de-
pending on the section, using the setting to permit/prohibit copying, printing,
or scanning.
This machine also provides the forgery prevention function in order to pre-
vent financial instruments from being copied illegally.
We appreciate your understanding that the copied image may have some
noise due to this forgery prevention function.