Konig CMP-WNAP10 User manual

CMP-WNAP10
Wireless Access Point
MANUAL
ANLEITUNG
MODE D’EMPLOI GEBRUIKSAANWIJZING
MANUALE MANUAL DE USO
HASZNÁLATI ÚTMUTATÓ
KÄYTTÖOHJE
BRUKSANVISNING
NÁVOD K POUŽITÍ

1
Set Up:
1. First, connect the power adapter to the receptor at the back
panel of the CMP-WNAP10 and then plug the other end of the
power adapter to a wall outlet or power strip. The POWER LED
will turn ON to indicate proper operation.
2. Secondly, using an Ethernet cable, insert one end of the cable to
the LAN port on the back panel of the CMP-WNAP10 and the
other end of the cable to a switch/router/modem. The LAN LED
light will illuminate to indicate a proper Ethernet connection.
Tips: The LAN Port on the CMP-WNAP10 is Auto MDI/MDI-X that
means you can use a straight-through or crossover cable to the LAN
Port.
3. By now, with default factory settings, your wireless adapter
should connect to the CMP-WNAP10 AP automatically as shown
below.
English Deutsch Français Nederlands
Italiano Español Magyar Suomi Svenska Česky

2
Default CMP-WNAP10 Settings:
http://192.168.1.1
User Name: admin
Password: admin
SSID: WNAP10
Channel: 11
Operational Mode: Access Point
For advanced settings and modifying factory default settings, please
refer to the manual on the CD which is enclosed in the packaging.
DECLARATION OF CONFORMITY
We declare under our responsibility that the product;
Brand name: KÖNIG
Model: CMP-WNAP10
Description: Wireless Access Point
Is in conformity with the following standards;
Radio: EN 300 328 V1.6.1:2004
EMC: EN 301 489-17 V1.2.1:2002
LVD: EN 60950-1:2001
Following the provisions of the 1999/5/EC R&TTE Directive. Conform
this regulation it’s allowed to use this product in all European Community
& EFTA countries.
We are not responsible for the use of this product outside the European
Community & EFTA countries.
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an
authorized technician when service is required. Disconnect the product from
mains and other equipment if a problem should occur.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of
the product or damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
Copyright ©
EnglishDeutschFrançaisNederlands
ItalianoEspañolMagyarSuomiSvenskaČesky