Linksys Instant Wireles Series User manual

Instant WirelessTM Series
Wireless Network
Access Point
Use this guide to install: WAP11 User Guide

COPYRIGHT & TRADEMARKS
Copyright © 2001 Linksys, All Rights Reserved. Instant Wireless™ is a registered trade-
mark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks
of Microsoft Corporation. All other trademarks and brand names are the property of their
respective proprietors.
LIMITED WARRANTY
Linksys guarantees that every Wireless Network Access Point is free from physical
defects in material and workmanship under normal use for one year from the date of pur-
chase. If the product proves defective during this warranty period, call Linksys Customer
Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR
PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT’S PACKAGING ON
HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT
PROOF OF PURCHASE. When returning a product, mark the Return Authorization
Number clearly on the outside of the package and include your original proof of pur-
chase. All customers located outside of the United States of America and Canada shall
be held responsible for shipping and handling charges.
IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PROD-
UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-
AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-
WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY
PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto-
ry, with respect to its products or the contents or use of this documentation and all
accompanying software, and specifically disclaims its quality, performance, mer-
chantability, or fitness for any particular purpose. Linksys reserves the right to revise or
update its products, software, or documentation without obligation to notify any individ-
ual or entity. Please direct all inquiries to:
Linksys P.O. Box 18558, Irvine, CA 92623.
FCC STATEMENT
This product has been tested and complies with the specifications for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if not installed and
used according to the instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which is found by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment or devices
• Connect the equipment to an outlet other than the receiver’s
• Consult a dealer or an experienced radio/TV technician for assistance
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator and your body.
UG-WAP11-011005E JL

Wireless Network Access Point
Introduction
The Instant WirelessTM Wireless Network Access Point
Don’t be bound by cabling restrictions any longer! The Instant Wireless™
Network Access Point from Linksys delivers the freedom to configure your net-
work your way. Utilization of state-of-the-art wireless technology gives you the
ability to set up workstations in ways you never though possible; no cables to
install means fewer expenses and fewer hassles.
The Instant Wireless™ Network Access Point’s high-powered antennae offer a
range of operation of up to 457 meters, providing seamless roaming throughout
your LAN infrastructure. Advanced user authentication ensures a high level of
security for wireless networking, while easy-to-use Windows-based diagnostics
and statistic tools ensure that you’ll always be in control. Best of all, the Instant
Wireless Network Access Point features easy installation—just plug it in and
you’re ready to go!
When all these features come together in one compact, lightweight, and power-
efficient unit, you have the ultimate in flexible networking—the Linksys Instant
Wireless™ Network Access Point.
Features
• Highly Efficient Dipole Antennae Provide Extensive Range of Operation
• EnjoyYour Wireless Office Beyond the Range of Ethernet Networking
• Auto Fall-Back Data Rate for Long-Distance Communication and Noisy
Environments
• High-Speed Data Transfer Rate Up to 11 Mbps
• Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant Equipment
• Features Roaming, Best Access Point Selection, Load Balancing, and
Network Traffic Filtering
• Extensive Operating Range Supports 150m (Indoors) and 500m (Outdoors)
• 64-Bit Wired Equivalent Privacy
• Free Software Driver Upgrades
• Compatible with Virtually All Major Operating Systems
• Free Technical Support—24 Hours a Day, 7 Days a Week for North
America Only
• 1-Year Limited Warranty
Table of Contents
Introduction 1
The Instant WirelessTM Wireless Network Access Point 1
Features 1
Package Contents 2
System Requirements 2
Planning Your Wireless Network 3
Network Topology 3
Roaming 3
Getting to Know theWireless NetworkAccess Point 4
The Wireless Access Point’s Rear Panel 4
The Wireless Access Point’s Front Panel 6
Connecting and Setting Up
the Wireless Network Access Point 7
Installing the USB Drivers for theWireless NetworkAccess Point 8
Installing the Driver Software for Windows 98 8
Installing the Driver Software for Windows Millennium 10
Installing the Driver Software for Windows 2000 11
Configuring the Wireless NetworkAccess Point 14
Installing the Configuration Utility 14
The USB Configuration Utility 18
Configuring the Wireless Network Access Point
with the USB Configuration Utility 18
TheAccess Point’s SNMP Configuration Utility 31
Creating a Temporary IP Address 31
Configuring the Wireless Network Access Point
with the Access Point’s SNMP Configuration Utility 32
Troubleshooting 47
Common Problems and Solutions 47
Frequently Asked Questions 47
Glossary 51
Specifications 56
Environmental 57
Warranty Information 58
Contact Information 59
1
Instant WirelessTM Series

Wireless Network Access Point
3
Planning Your Wireless Network
Network Topology
A wireless LAN is a group of computers, each equipped with one Instant
Wireless™ Series Adapter. Computers in a wireless LAN must be configured
to share the same radio channel.
The Instant Wireless™ Series Adapter provides access to a wired LAN for
wireless workstations. An integrated wireless and wired LAN is called an
Infrastructure configuration. A group of Instant Wireless™ Series Adapter
users and an Instant Wireless™ NetworkAccess Point compose a Basic Service
Set (BSS). Each Instant Wireless™ Series Adapter PC in a BSS can talk to any
computer in a wired LAN infrastructure via the Instant Wireless™ Network
Access Point.
An infrastructure configuration extends the accessibility of an Instant
Wireless™ Series Adapter PC to a wired LAN, and doubles the effective wire-
less transmission range for two Instant Wireless™ Series Adapter PCs. Since
the Wireless Network Access Point is able to forward data within its BSS, the
effective transmission range in an infrastructure LAN is doubled.
The use of a unique ID in a BSS is essential. All Instant Wireless™ Series
Adapter PCs configured without roaming options in an independent BSS must
be configured with a BSS ID used in the BSS.
The wireless LAN Infrastructure configuration is appropriate for enterprise-
scale wireless access to a central database, or as a wireless application for
mobile users.
Infrastructure mode also supports roaming capabilities for mobile users. More
than one BSS can be configured as an Extended Service Set (ESS). This con-
tinuous network allows users to roam freely within an ESS. All Instant
Wireless™ Series Adapter PCs within one ESS must be configured with the
same ESS ID and use the same radio channel.
Before enabling an ESS with roaming capability, choosing a feasible radio
channel and optimum Wireless Network Access Point position is recommend-
ed. Proper Wireless Network Access Point positioning combined with a clear
radio signal will greatly enhance performance.
Instant WirelessTM Series
Package Contents
• One Instant WirelessTM Network Access Point
• One AC Power Adapter
• One Setup CD-ROM
• One User Guide
• One Quick Installation and Registration Card (not shown)
• Two Detachable Antennae
• One USB Cable
System Requirements
• A PC with USB Support or Ethernet Connection
• Windows 95, 98, Millennium, NT version 4.0, or 2000 Professional
• 500 kbytes of free disk space for utility and driver installation
• A 10 Mbps Category 3 or Better network RJ-45 connection
2
Roaming
Linux/Unix Users: Though these operating systems are not supported by
Linksys, the Wireless Access Point should work in these environments. The
WAP11 can be configured under these operating systems using SNMP. A
configurable Management Information Base file (MIB) named
AT76C510.MIB can be found on the Setup Utility CD. This file is for
Linux/Unix users only, and is not necessary for anyWindows installation.

Instant WirelessTM Series
Getting to Know the Wireless
Network Access Point
The ADSL Modem Router’s Rear Panel
Your Access Point’s ports, where network cables are connected, are located on
the rear panel of your Access Point.
The Wireless Network Access Point’s Ports
Dipole Antenna
Connectors These two round connections are where the anten-
nae are connected to the Access Point.
LAN This LAN (Local Area Network) port connects to
Ethernet network devices, such as a hub, switch, or
router.
Power The Power port is where you will connect the
power adapter. Be sure to connect the power cord to
the power adapter before plugging it in.
Configuration Port The Configuration Port is a USB port (Type B-
slave) which connects to a USB-ready PC in order
to configure the Access Point’s settings. To work
with USB ports, your PC must be running Windows
98, 2000, or Millennium.
4
Your Access Point comes with a USB cable that has two different types of con-
nectors. Type A, the master connector, is shaped like a rectangle and plugs into
your PC’s USB port. Type B, the slave connector, resembles a square and con-
nects to the USB port on the rear panel of your Wireless NetworkAccess Point.
USB Compatibility with Your PC
To use the USB port on the Wireless Network Access Point, you must have
Windows 98, 2000, or Millennium installed on your PC. USB is not support-
ed in a Windows 95 or NT environment.
Also, your PC must have a USB port installed and enabled. Some PCs may
have a disabled USB port. If your port doesn’t seem to be working, there may
be jumpers on the motherboard or a menu option in the BIOS to enable a PC’s
USB port.
Other motherboards have USB interfaces, but no ports. You can install your
own USB port and attach it to your PC’s motherboard using hardware pur-
chased at retail computer stores. See your PC’s User Guide for instructions.
There is no USB Support on PCs
running Windows 95 or Windows NT.
USB Type A USB Type B
The Wireless Access Point’s Rear Panel
Note: The Configuration Port does not connect your Access
Point to your PC (or any other device) for networking purposes.
Its only function is to allow you to configure yourAccess Point’s
settings. Once the Access Point is configured, you may remove
the USB cable connecting the Access Point to your PC.
Wireless Network Access Point
5

Instant WirelessTM Series
Connecting and Setting Up the
Wireless Network Access Point
1. Locate an optimum location for theWireless NetworkAccess Point. The
best place for your Wireless Network Access Point is usually at the center of
your wireless network, with line of sight to all of your mobile stations.
2. Fix the direction of the antenna.Try to place it in a position which can best
cover your wireless network. Normally, the higher you place the antenna, the
better the performance will be. The antenna’s position enhances the receiv-
ing sensitivity.
3. Connect a standard UTP cable to the Wireless Network Access Point.
Then, connect the other end of the Ethernet cable to a switch or hub. The
Wireless Network Access Point will then be connected to your 10/100
Network.
4. Connect the AC Power Adapter to the Wireless Network Access Point’s
Power Socket. Only use the power adapter supplied with the Wireless
NetworkAccess Point. Use of a different adapter may result in product dam-
age.
5. Connect the appropriate end of the USB Cable to theWireless Network
Access Point’s Configuration Port. Connect the other end to the USB port
on your PC. If your USB port is working properly, your system should
immediately recognize the Access Point and attempt to install drivers for it.
Continue to the next section for instructions on how to install the drivers.
Now that the hardware installation is complete, proceed to Installing the USB
Drivers for theWireless NetworkAccess Point and The USB Configuration
Utility for configuring the Access Point through your PC’s USB port. To con-
figure the Access Point through an Ethernet or Wireless connection, proceed to
TheAccess Point’s SNMP Configuration Utility.
The Hardware Installation is complete.
7
Wireless Network Access Point
T
he ADSL Modem + Router’s LEDs
The LAN Indicators
Power Red. The Power LED lights up when the Access Point is
powered on.
ACT Green. The ACT LED is lit to show that other wireless
devices are accessing the Access Point. If the LED is flick-
ering, the Access Point is actively sending or receiving data
to or from one of the wireless devices on the network.
LINK Amber. The LINK LED serves two purposes. If the LED is
continuously lit up, theAccess Point is successfully connect-
ed to a device through the LAN port. If the LED is flicker-
ing, it is an indication of any network activity.
The Wireless Access Point’s Front Panel
Note: Once your Access Point is installed and con-
figured, the USB cable may be removed.
6

3. Windows will now ask you where to search for the driver software. Select
Specify a location and type in the blank field D:\WAP11\WIN9X (where
“D” specifies your CD-ROM). Then, click the Next button.
4. Windows will now search for the driver. After Windows has acknowledged
finding the driver, click the Next button.
5. Windows will now install the driver files. Click the Finish button when com-
pleted.
6. Continue to the Configuring the Wireless Network Access Point section
for software installation.
9
Installing the USB Drivers for the
Wireless Network Access Point
1. Windows 98 will automatically identify the Wireless Network Access Point,
once it is connected to the PC via the USB cable, and prompt you to install
the necessary driver. Make sure that the Setup Utility CD is inserted into
your CD-ROM drive and click the Next button on the Add New Hardware
Wizard screen to proceed. (When you insert the Setup Utility CD, the instal-
lation may try to run automatically. If it does, exit out of the program and
return here.)
2. Select Search for the best driver... and click the Next button. This will
search for the Windows 98 driver.
8
Instant WirelessTM Series Wireless Network Access Point
Installing the Driver Software for Windows 98

1. Windows 2000 will automatically identify the Wireless Network Access
Point, once it is connected to the PC via the USB cable, and prompt you to
install the necessary driver. Make sure that the Setup Utility CD is inserted
into your CD-ROM drive and click the Next button on the Found New
Hardware Wizard screen to proceed.
2. Select Search for a suitable driver... and click the Next button. This will
search for the Windows 2000 driver.
11
1. Windows Millennium
will automatically identi-
fy the Wireless Network
Access Point, once it is
connected to the PC
via the USB cable, and
prompt you to install the
necessary driver.
2. Select Automatic Search for a better driver (Recommended) and click the
Next button. This will search for the Windows Millennium driver.
3. Windows will now install the driver files. Click the Finish button when com-
pleted. Windows may ask for the driver, which is located at
“D:\WAP11\usbdrv” (where “D” specifies your CD-ROM drive). Click OK.
4. Continue to the Configuring the Wireless NetworkAccess Point section
for software installation now.
10
Instant WirelessTM Series
Installing the Driver Software for Windows 2000
Wireless Network Access Point
Installing the Driver Software for Windows Millennium

5. Windows will now install the driver files. Click the Finish button when com-
pleted.
6. Continue to the Configuring the Wireless NetworkAccess Point section
for software installation.
13
3. Under “Optional Search Locations,” select Specify a location and click the
Next button.
4. You will be prompted to enter a path; type “D:\WAP11\usbdrv” (where D:
is the letter of your CD-ROM drive) and click OK. Windows will now
search for the driver. After Windows has acknowledged finding the driver,
click the Next button.
12
Instant WirelessTM Series Wireless Network Access Point

Instant WirelessTM Series
Configuring the Wireless
Network Access Point
The Wireless Network Access Point can be configured one of two ways,
through the USB Utility or the Access Point SNMP Configuration Utility.
USB Utility
The USB Utility can be used when configuring the Wireless Network Access
Point through a USB connection and is compatible with Windows 98,
Millennium, and 2000.
Access Point SNMP Configuration Utility
The Access Point SNMP Configuration Utility can be used when configuring
the Wireless NetworkAccess Point through an Ethernet connection and is com-
patible with all Windows Operating Systems. You may also configure the
Access Point through its wireless connections.
Insert the Setup Utility CD into your CD-ROM Drive. The Setup Utility
should run automatically and
the screen shown on the top of
the next page should appear.
If it does not, click the Start
button and choose Run. In the
box that appears, enter
D:\setup.exe (where “D” is
the letter of your CD-ROM
drive).
14
Note: In order for all other wireless devices to communicate with the Wireless
Network Access Point, those devices must be operating in the Infrastructure
Mode. If any wireless devices are configured in the Ad Hoc Mode, they will
not be recognized by the Access Point.
Installing the Configuration Utility
1.The following screen should appear.
Click on the WAP11 product button in the column on the left to select it.
2.When this screen appears, click on the Install tab to start the setup.
15
Wireless Network Access Point
Linux/Unix Users: Since the Configuration Utility is written for Windows
users, you will have to configure theWirelessAccess Point using SNMP. A con-
figurable MIB file (AT76C510.MIB) can be found on the Setup Utility CD.
Remember, Linksys does not support Linux or Unix as an operating system.
This file is for Linux/Unix users only, and is not necessary for anyWindows
installation.
Note: This useful menu screen can be accessed at any time, simply by insert-
ing the Setup Utility CD into your CD-ROM drive. From this menu, software
can be uninstalled, and you may view online documentation and contact infor-
mation. Your AP will still work after uninstalling the Utility.

5.The Choose Destination Location screen will show you the default desti-
nation chosen by the utility. It is recommended that you leave the default des-
tination, but if you want to install this in another location, click the Browse
button and select an alternate destination. When you are ready to continue,
click the Next button.
6. The Configuration Utility has now been installed. Select Yes to restart your
PC and then click Finish.
Wireless Network Access Point
3. When the Welcome screen appears, click Next to continue.
4. Read the terms of the License Agreement, and if you agree, click Yes; oth-
erwise, click No to cancel the configuration process.
Instant WirelessTM Series
1716

• WEP. If you have not enabled WEP encryption, this will read Disabled.
When you are using WEP encryption, it will read Enabled and list the level
of encryption in use.
• Reconnect. If the USB connection to the Access Point is disconnected, you
can reconnect the USB cable and click the Reconnect button. This will
retrieve the most recently saved configuration from the Access Point so you
will be ready to use the USB Configuration Utility again.
• Restore Defaults. Click this button to restore theAccess Point’s default set-
tings. If this button is clicked, any setting you may have made through the
USB Utility will be lost.
Click the Apply button to store the information. A new dialog box will appear.
Click the Yes button to accept the changes.
If you have not already clicked the Apply button, the Close button will close
the USB Utility without saving any changes.
Click the Help button for assistance.
19
The USB Configuration Utility
The USB Configuration Utility is provided to allow you further customization
of the Wireless Network Access Point and your wireless network through your
USB port.
THE STATUS TAB
The Status tab displays the Wireless Network Access Point’s current status.
From this tab, you can view the status information along with reconnecting to
the Wireless Network Access Point and restoring its default settings.
• Working Status. This displays your current connection status, notifying
you of any problems with the connection.
• Regulatory Domain. This status shows the regulatory domain preset by the
manufacturer for the country the product was purchased in.
• Firmware Version. This displays the present version of the Access Point’s
firmware and is limited to a maximum of four characters.
• MAC Address. This displays the MAC Address of your current WAP11.
• Mode. This displays the mode your WAP11 is currently configured for:
Access Point, Access Point Client, or Wireless Bridge.
• ESSID. The unique name shared among all points in your wireless network
is displayed here.
• Channel. The wireless channel shared by all of the points in your wireless
network is displayed here.
18
Wireless Network Access PointInstant WirelessTM Series
Configuring the Wireless Network Access Point
with the USB Configuration Utility

2120
THE ADVANCED TAB
Before making any changes to the Advanced tab, please check your wireless
settings on other systems, as these changes will alter the effectiveness of the
Wireless NetworkAccess Point. In most cases, these settings do not need to be
changed.
• Fragmentation Threshold. This value indicates how much of the Access
Point’s resources are devoted to recovering packet errors. The value should
remain at its default setting of 2,346. If you have decreased this value and
experience high packet error rates, you can increase it again, but it will like-
ly decrease overall network performance. Only minor modifications of this
value are recommended.
• RTS Threshold. This value should remain at its default setting of 2,346.
Should you encounter inconsistent data flow, only minor modifications are
recommended.
Wireless Network Access PointInstant WirelessTM Series
THE BASIC SETTINGTAB
The Access Point automatically detects the settings to your wireless network.
Changing these values will alter your current wireless network configuration.
• ESSID. The ESSID or SSID is the unique name shared among all points in
a wireless network. The ESSID must be identical for all points in the wire-
less network. It is case sensitive and must not exceed 30 characters, which
may be any keyboard character. Make sure this setting for all points in the
wireless network are the same. Verify that you’re using the correct ESSID
and click the Apply button to set it.
• Channel. Select the appropriate channel from the list provided to corre-
spond with your network settings, between 1 and 11 (in NorthAmerica).All
points in your wireless network must use the same channel in order to func-
tion correctly.Verify that the correct channel is selected and click the Apply
button to set it.A new dialog box will appear. Click the Yes button to accept
the changes.
• Access Point Name. You may assign any name to your Access Point.
Unique, memorable names are helpful, especially if you are employing
multiple Access Points on the same network.

• Authentication Type. You may choose between Open System, Shared
Key, and Both. The Authentication Type default is set to Open System, in
which the sender and the recipient do NOT share a secret key. Each party
generates its own key-pair and asks the receiver to accept the randomly-
generated key. Once accepted, this key is used for a short time only. Then
a new key is generated and agreed upon. Shared Key is when both the
sender and the recipient share a secret key.
• Preamble Type. The preamble defines the length of the CRC block for
communication between the Access Point and the roaming Network Card.
(High network traffic areas should use the shorter preamble type.) Select
the appropriate preamble type and click the Apply button to set it.
• Basic Rates. The basic transfer rates should be set depending on the speed
of your wireless network. Set the correct basic rate for your wireless net-
work and click the Apply button to set it.
• Antenna Diversity. These two settings determine whether either or both
antennae will be used to transmit or receive. The default setting, Both,
means that the antennae are set to both Transmit and Receive; this is the
recommended setting. The WAP11 will auto-detect which antenna to use
based on signal strength.
• Auto Rate Fall Back setting should be checked to make your wireless net-
work flexible for roaming wireless devices.As wireless devices move away
from the Wireless Network Access Point, the transfer rate will
automatically fall back to the most optimum rate allowed.
22
Instant WirelessTM Series
THE MODE TAB
The WAP11 offers three modes of operation:Access Point,Access Point Client,
and Wireless Bridge.
• Access Point - The
Operational Mode is
set to Access Point by
default. This connects
your wireless PCs to a
wired network. In
most cases, no change
is necessary.
Wireless Network Access Point
23

To configure a Point to Point bridged environment:
1. Click Point to Point.
2. Set the MAC Address of the Access Point in LAN 1 to look for the
MAC Address of the Access Point in LAN 2.
3. Set the MAC address of the Access Point in LAN 2 to look for the
MAC Address of the Access Point in LAN 1.
4. On the Operational Mode tab, enter the Remote MACAddress of the
remote Access Point. The remote Access Point also needs to be set up
as a Wireless Bridge.
Note: All devices on each LAN must be connected through a hub or switch.
Point to MultiPoint
This mode allows you to construct a network that has multiple WAP11 units
bridging wirelessly.
• Access Point Client -
A WAP11 set to Access
Point Client mode is
able to talk to one main
WAP11 and wireless
clients within its range.
This mode allows your
WAP11 to act as a client
of a main WAP11. A
LAN attached to your
WAP11 client can then
be wirelessly bridged to
the main WAP11. Enter
the required MAC
address of the main
WAP11.
• Wireless Bridge - If you are trying to make a wireless connection between
two or more wired networks, select Wireless Bridge.There are two options:
Point to Point and Point to MultiPoint.
Point to Point
This mode connects two physically separated LAN segments by using two
WAP11 units.
Instant WirelessTM Series Wireless Network Access Point
24 25
Note: In Wireless Bridge mode, the WAP11 can ONLY be
accessed by another wireless bridge. In order for your other
wireless devices to access the WAP11, you must reset it to
Access Point mode. The two modes are mutually exclusive.

THE IP SETTING TAB
The IP settings for the Wireless Network Access Point are made from this tab.
• IP Address. This IP address must be unique to your network. We suggest
you use the default IP address of 192.168.1.250. As this is a private IP
address, there is no need to purchase a separate IP address from your serv-
ice provider. Verify the address and click the Apply button to save changes.
• IP Mask. Your Access Point’s Subnet Mask must be the same as your
Ethernet network. Verify this is correct and click the Apply button to set it.
• DHCP Setting. Check the box next to DHCP Enable to allow it to obtain
a dynamic IP address from a DHCP server. You may also choose how the
WAP11 dynamically obtains an IP address—either Wireless or Ethernet.
• IP Filtering. For security, click the check box to enable IP filtering, which
allows IP packets only through the Access Point.
• Gateway. This setting only appears when the DHCP client is enabled; it
indicates the status of the gateway and is not user-adjustable.
27
To configure a Point to MultiPoint bridged environment:
1. Click Point to MultiPoint for the WAP11 used in LAN 1. No MAC
Address binding is needed.
2. Set the Access Points in LAN 2 and LAN 3 to Point to Point, and
have them look for the MAC Address of the Access Point in LAN 1.
Only one of the Access Points must be in Point to MultiPoint mode. For
all other bridgedAccess Points, select the Point to Point option, and enter
the Remote MACAddress of the Access Point set to Point to MultiPoint.
Click the Apply button to store the information. A new dialog box will appear.
Click the Yes button to accept the changes.
26
Instant WirelessTM Series
Note: Configuring the IP address here allows you to use the SNMP
Configuration Utility software. It is not necessary to make any changes to the
IP address if you are not planning on using the SNMP Configuration Utility.
Wireless Network Access Point

Wireless Network Access Point
• WEP Key Setting. This setting is the configuration key used in accessing
the wireless network via WEP encryption. To generate an encryption key:
1. Type exactly the same case sensitive Passphrase in the PassPhrase field. For
security purposes, please create your own Passphrase.
2. Click the Done button to create the encryption keys. The Passphrase gener-
ates four unique keys.
3. Make sure that the Default Key is the same for each point on the wireless
network.
4. Click the Apply button to store the information.
5. Click the Yes button to accept the changes in the dialog box that appears.
• Password Setting. This option allows you to choose Read/Write and/or Read
Only. It is recommended that you change both to maximize security. For both
options, type in a password and confirm it.
• Authorization Table Enable. This setting can be enabled here, but any setting
changes must be made through the SNMP Utility. It is recommended that this
setting be enabled using the SNMP Utility.
29
Instant Wireless™ Series
THE SECURITY TAB
WEP (Wired Equivalent Privacy) is a data privacy mechanism based on a 40 bit
shared key algorithm, as described in the IEEE 802.11b standard. In order to utilize
WEP encryption, all points in your wireless network must have WEP enabled and
be set to the same Key Setting. For easier configuration, it is strongly recommend-
ed that you use the Passphrase feature.
• WEP (Disable/64-bitWEP/128-bitWEP). In order to utilize WEP encryption,
select the WEP setting from the pull-down menu. If you do not wish do utilize
WEP encryption, make sure Disable is selected. This specific WEP encryption
is unique to Linksys and may conflict with other vendors’WEP encryption.
• Passphrase. This is the code used when a point on the wireless network wishes
to log on to the network. It is a text string with a maximum of 32 alphanumeric
characters.The WEP Key Settings are based upon the Passphrase determined by
you. Type that here. This passphrase may not work with non-Linksys products
due to possible incompatibility with other vendors’passphrase generators.
28
Note: For security, it is recommended that you make up your own passphrase
(i.e. “Home”). You must use the same passphrase or WEP key settings for all
wireless computers in order for the wireless network to function properly.

Wireless Network Access Point
The Access Point’s SNMP
Configuration Utility
The Access Point SNMP Configuration Utility is provided to allow you further
customization of the Wireless Network Access Point and your wireless network
through your Ethernet or wireless connection. It is strongly recommended that you
use your wireless connection to use the SNMP Configuration Utility.
If you wish to use the SNMP Configuration Utility to configure the Access
Point, you must assign a temporary IP address to your computer.
You may need to assign the PC a temporary IP address to gain access to the
Access Point.
1. This can be done at Start, Settings, Control Panel, then Network.
2. Click the network adapter associated with the TCP/IP and click
Properties.
3. Note your current settings in order to restore your TCP/IP configuration.
4. Select Specify an IP address and enter the following values:
IP - 192.168.1.50, Subnet Mask- 255.255.255.0
5. Click OK and click OK again in the Network window.
6. Restart the computer when asked.
Make sure that you enter an IP address for the Access Point in order to access
it at a later time. Once you have completed the IP Address Configuration, you
can set the PC back to its previous settings. For example, to “Obtain an IP
Address automatically.”
31
Instant Wireless™ Series
30
Creating a Temporary IP Address
Linux/Unix Users: Though these operating systems are not supported by
Linksys, the Wireless Access Point should work in these environments. The
WAP11 can be configured under these operating systems using SNMP. A
configurable Management Information Base file (MIB) named
AT76C510.MIB can be found on the Setup Utility CD. This file is for
Linux/Unix users only, and is not necessary for anyWindows installation.
THE INFO TAB
The Info tab displays general information about Linksys and the USB Utility.
The USB Utility’s copyright date and version number are listed as well as the
Utility’s firmware version. At the bottom of the screen, you will find a button
that will access Linksys’ web page (once your Internet connection is properly
set up), the email address for technical support, and the phone number to call
for technical support.
Note: Once your Access Point is installed and con-
figured, the USB cable may be removed.

Wireless Network Access Point
33
Instant Wireless™ Series
To restore your TCP/IP configuration, follow the steps below:
1. Follow steps 1 and 2 in the instructions above.
2. Select either Specify an IP address or Obtain IP address automatically
and enter the original values you noted earlier.
3. Click OK and click OK again in the Network window.
4. Restart your computer.
If you wish to run the SNMP
Configuration Utility, click Start,
Programs, WAP11 Configuration
Utility, and WAP11 SNMP.
When you first start the Access
Point SNMP Configuration Utility,
a screen will appear asking you to
enter the Wireless Network Access
Point’s IP Address.
Enter the IP Address—192.168.1.250 is the default setting—and Password—pub-
lic is the default password—and then click the OK button to continue.
(As this is a private IP address, you do not need to purchase an additional IP
Address from your service provider.)
32
THE STATUS TAB
The Status tab displays the Wireless Network Access Point’s current status.
From this tab, you can view the status information along with reconnecting to
the Wireless Network Access Point and restoring its default settings.
• Working Status. This displays your current connection status, notifying
you of any problems with the connection.
• Regulatory Domain. This status shows the regulatory domain preset by the
manufacturer for the country the product was purchased in.
• Firmware Version. This displays the present version of the Access Point’s
firmware and is limited to a maximum of four characters. It also shows the
Access Point’s assigned name.
• MAC Address. This displays the MAC Address of your current WAP11.
• ESSID. The unique name shared among all points in your wireless network
is displayed here.
Configuring the Wireless Network Access Point
with the Access Point’s SNMP Configuration Utility
DEFAULT SETTINGS
Default IP Address: 192.168.1.250
Default SubNet Mask: 255.255.255.0

Wireless Network Access Point
THE BASIC SETTINGTAB
The Wireless Network Access Point will automatically detect the settings to
your wireless network. Changing these values will alter your current wireless
network configuration.
• ESSID. The ESSID or SSID is the unique name shared among all points in
a wireless network. The ESSID must be identical for all points in the net-
work. It is case sensitive and must not exceed 30 characters, which may be
any keyboard character. Make sure this setting for all points in the network
are the same. Verify that you’re using the correct ESSID, and click the
Apply button to set it.
• Channel. Select the appropriate channel from the list provided to corre-
spond with your network settings, between 1 and 11 (in North America).
All devices that communicate with this Access Point must use the same
channel in order to work correctly. Verify that the correct channel is select-
ed before clicking the Apply button.
If you have not already clicked the Apply button, the Close button will close
the SNMP Utility without saving any changes.
Click the Apply button to store the information, then click the Yes button to
accept the changes in the dialog box that appears.
Click the Help button for assistance.
35
Instant WirelessTM Series
• Channel. The wireless channel shared by all wireless devices connected to
this Access Point is displayed here.
• WEP. If you have not enabled the WEP encryption protocol, this will read
Disabled.When you are using WEP encryption, it will read Enabled and list
the level of encryption in use.
• Reset. If you are experiencing problems with your wireless connection,
click the Reset button to reset the system.
• FindAP. If you have changed the default settings of your Access Point and
do not have the information at hand, pressing this button will locate all
Access Points on your wired network and display their IP addresses and
common name.
• Reconnect. If, for any reason, the Ethernet connection to the Wireless
NetworkAccess Point is disconnected, you can reconnect the Ethernet cable
and click the Reconnect button here. This will retrieve the most recently
saved configuration from the Access Point so you will be ready to use the
Access Point SNMP Configuration Utility again.
• Restore Defaults. Click this button to restore theAccess Point’s default set-
tings. If this button is clicked, any setting you may have made through the
Access Point SNMP Configuration Utility will be lost.
If you have not already clicked the Apply button, the Close button will close
the SNMP Utility without saving any changes.
Click the Apply button to store the information. A new dialog box will appear.
Then click the Yes button to accept the changes.
Click the Help button for assistance.
34